“zcash gpu miner +trezor hardware wallet”

so it’s latency dependent. I’m not sure how much time u have. If u have some, I would compile some versions that should show where the bottleneck is. Also could u pls check the cpu usage. If u have some time for all this stuff ofc.

Claymore has updated his ZCash AMD GPU miner to version 12.5 adding support for the ZCash forks (altcoins using the same Equihash algorithm) as well as doing some more improvements to the miner. The latest version comes with improved fans management for latest drivers and Polaris cards, added shares-per-GPU statistics when “s” key is pressed, addend an option to use a password for remote monitoring as well as included EthMan v3.0 which supports passwords and email notifications. This is currently the preferred solution by most miners mining ZEC or other coins based on the Equihash algorithm for AMD OpenCL GPU mining rigs, the miner does not yet have support for Nvidia GPUs. Nvidia miners can go for some of the available options for CUDA mining such as the nheqminer, excavator or EWBF’s CUDA Zcash miner for mining coins using the Equihash algorithm on their hardware.

Since we included –api you can monitor the miner with a web browser as opposed to the command/terminal window. On the mining rig, navigate to 127.0.0.1:42000 in a web browser. You should see a screen like the one below.

dstm’s ZCash Cuda miner version 0.6 adds failover pool support, one of the features that we wanted to see the most to make this a really good alternative. It is not failover pool support only however, the latest version introduces support for configuration files as well and an option to control mining intensity for the GPUs. There are also a number of other new features added as well as improvements that might be useful for some people, but we can already say that dstm’s ZCash Cuda miner is now the better miner when compared with EWBF ZCash CUDA miner, so if you are still using EWBF’s software you might want to give dstm’s one a go. Do note that dstm’s ZCash Cuda miner should be faster performing in terms of hashrate with the same settings, also there is a 2% developer fee included with this closed source miner.

If you want to dual-boot and not just clean install you will need this step. Right click on the windows start menu, on the bottom left and select ‘Disk Management’. Select your main HDD or SSD that you want to dual boot from, right click on it and press ‘Shrink’. I suggest using at least 32gb just to be safe.

just wanted to add: especially the 1060 series is a good candidate for mining with lower power consumation. Even Equihash can be run with like 75 to 84 % power which can result in : 297 Sol/s , 86 watt usage, -> 3.45 sol/w

Interesting blog. I was about to post a similair post. Buy and hold for the upcoming 3 years and the blockchain market will find it’s way. I was researching a way to do better investment analysis on the current cryptos. I was wondering if anyone of you uses: https://www.coincheckup.com Since I use this site I make so much less basic investment mistakes.

The price of Ethereum mining machines must be adjusted frequently according to many factors, including ETH/USD exchange rate, the network difficulty, and expected difficulty increase. Refund requests based on price changes cannot be honored.

Zcashcommunity.com is your source for the latest news and information about Zcash. This Site and the Chat at chat.zcashcommunity.com are public resources for the Zcash community and are not owned or maintained by Zcash Electric Coin Company. If you would like to support this work you can donate HERE

–pass (the actual value of this parameter is usually ignored by pools but oftentimes required by either the pool, mining program, or both. Can be set to something like “X” or “Z” unless your pool requires a specific password).

Ran the same settings on both miners and it’s more like 4-5% more than EWBF. 1080 + 1070 =~1020 Sol/s on Bminer with 60% Power limit and 350 W at the wall. On EWBF it’s ~970 Sol/s for both. The 1080 gets the biggest boost on Bminer about 10% ~574 Sol/s with 60% power limit. I’m mining on Flypool which only shows the effective hash rate, so it will take a while to be accurate but it seems legit.

One thing I will mention is that mining software is often flagged from antivirus vendors as containing malware even though they don’t. The reasons for the many false positives is that a lot of malware does contain these mining programs since botnet operators can secretly install mining software on unsuspecting user’s PCs and point to an address they (the botnet operator) controls. As a result, many of the antivirus vendors simply mark anything with a mining program as suspect. This is because even though mining is becoming more popular, it is still probably done by less than 1% of all computer users who would use antivirus scans, so to the antivirus vendors this means 99% of their target audience who has a miner program probably didn’t put it there themselves. They play it safe and just mark it as malware or PuP (potentially unwanted program) as they figure if you are a miner you know its there and probably have the technical ability to work around it.

Some of the above specialize for AMD GPUs, whereas other are tailored to Nvidia GPUs. However, you’ll find that the Claymore Miner works just fine for both, so the choice is ultimately a matter of preference.

GeForce GTX 680MX, GeForce GTX 680M, GeForce GTX 675MX, GeForce GTX 675M, GeForce GTX 670MX, GeForce GTX 670M, GeForce GTX 660M, GeForce GT 650M, GeForce GT 645M, GeForce GT 640M, GeForce GT 640M LE, GeForce GT 635M, GeForce GT 630M, GeForce GT 625M, GeForce GT 620M, GeForce 610M

If you have a Linux CUDA compute machine available we highly recommend using nvidia-docker. Installing different CUDA versions for Zcash mining and deep learning frameworks and managing versions can be painful. Using nvidia-docker you do not have to worry about that.

Right click on the bat file called “flypool” and hit Edit. The file will open in Notepad. Paste what you’ve copied from the flypool website. I’m going to update my server to “us1” instead of “eu1,” and I’m also going to remove the “—cuda_devices” language at the end. This language is used if you want to designate mining only to certain devices (for example, if you want to game with one GPU and mine with the other two). If you want to mine with all devices, you can delete the —cuda_devices designation.

“ethereum price |bytecoin calculator”

Freedom Miner is a Zcash Miner beast and is defaulted to mine ZEC out of the box, however changing currencies is a breeze before or after you receive the rig. During purchase simply provide us with your wallet addresses for the coins you wish to mine and we’ll send your rig pre-configured. Don’t have wallet addresses yet? No problem, we can ship your rig with our system defaults.Freedom Miner comes with a standard 3-prong US style power cord, but other standard power supply cables are compatible as well.

Not everyone has the proper knowledge, time and patience to start Zcash mining on their own but still you can go for Zcash mining using your own computer.  If you have already decided to mine Zcash, you should know what hardware you need to use. First of all you go for right hardware, then software. There are so many software types available in market that works with various different hardware configurations.

Simply plug in Freedom Miner to any 110-240V power outlet, plug in the Ethernet connection to your router or cable modem, turn it on and it will begin mining right away. A typical 15A circuit can support two Freedom Miners (7.25A / Unit), assuming no other equipment is being powered at the same time.

The card should have at least 1 GB of RAM, or it won’t be able to properly mine Zcash. This is a correction from the video, as EWBF supports GPUs with just 1 GB of RAM, compared to Ethereum’s 3 GB requirement. However, many older cards may not be energy efficient enough to turn a profit, so check on whattomine.com by entering your card’s info.

Transaction Fees   This is a small, optional fee attached to a Bitcoin transfer. Upon the completion of all 21 million bitcoins being created, these fees will provide the reward to encourage miner to continue mining verifying the network transactions.

If all is looking good at this point, congratulations, you have successfully setup the EWBF miner and pointed it to a pool and are earning Zcash. After some time you can go to the Payouts tab to get a rough estimate of your expected income, but the numbers don’t really mean much until at least 24 hours of constant mining have gone by.

Since we included –api you can monitor the miner with a web browser as opposed to the command/terminal window. On the mining rig, navigate to 127.0.0.1:42000 in a web browser. You should see a screen like the one below.

Equihash Titan X Bitmain AntMiner U1 Cryptotrader Decred staking Heavycoin trading Simple Trade Bot review KeccakC Nvidia Innosilicon Scrypt ASIC new launches CMC crypto coin Scrypt cloud mining hashrate Raspberry Pi mining controller crypto token Neoscrypt hashrate rent artificial intelligence 250 MHS Litecoin ASIC Noirbits info Americancoin exchanges sgminer luffa512 windows Poloniex coin list COAL MSI GTX 960 specifications ICO announcement threads Oh Crop KnCMiner Neptune SegWit support BW-L21 ASIC ZEC Nvidia sph-sgminer Fresh LegendaryCoin trading sgminer fork hmq1725 MEC pool Multipool DOGE GTX 1070 ETH mining DVC asic ChangeTip Scan Bitcoin limits X14 rent Blake miner excavator NVIDIA miner Bitcoin Billionaire iPad game VRC trading Antminer R4 ASIC 300 MHS Litecoin ASIC A2 miner review RIC SiaCoin ccminer TEK mining YAC alt crypto AMD mining GPU Novacoin exchanges Viper ASIC chip HBN info Gigabyte Windforce failed fans EAC pool RX Vega 56 miner XMOS mining MediterraneanCoin alt crypto Neoscoin info cgminer 3.8.5 antminer keccak nvidia miner TDP increase Bitcoin problem

There are some other mining pools. One of them is 2Miners.com . 2Miners is a mining pool for ZEC mining as well as for all Ethash and Equihash coins. For all of them, SOLO mining option is available. Other features include monitoring bots (free of charge) for any amount of rigs as well as block notification bots. 2Miners have implemented the unique Nicehash ports for rented hashpower fully compatible with Nicehash stratum. Their servers, with DDOS protection, are located in EU, US and ASIA servers are planned soon.

We’ll be starting the miner using a simple text file that tells the operating system to launch the mining program. It also allows the configuration of settings when EWBF starts. These files can be created an edited with any text editor. On the Windows platform, the correct file extension is .bat. On Linux, it is .cmd.

CEXIO Coinbase GTX 750 Ti mining Mining Sweden AMD Bitcoin Robot trading Ethereum OpenCL miner cudaminer 2014-02-28 ZCash Nvidia Miner stop web miner dual-miner asic Gridseed ASIC Gridseed GC3355 crypto coin news DragonMint 16T miner Yescrypt GPU miner ZeusHash not profitable ccMiner 1.5.53-git sp coin control Tigercoin info MintCoin info mkxminer video card mining frame FLO info video card mining CoinGecko Erupter Blade dash poker chips Freicoin sha-256 top btc pools XSV info Alphacoin scrypt sgminer 5.1.0 neoscrypt IFC scrypt coin Bitcache Bitcoin Crypto-CoinZ mining profitability EZC info cloud mining promo YBC pools Gigabyte GA-H110-D3A mining heater Black Friday Bitcoin discounts BUN mining mining operation management PXC iBeLink DM384M software GLX Coin Dance buy precious metals with BTC SF300K01 mining software ccMiner 1.5.76-git FSP mining power supply ccminer hashrate test Isracoin mining StartCoin trading WC pool FJC Karma mining Banana Pi DCY Cerium trading WaveCrest card not working PeerCoin exchanges RX Vega miner 12x Radeon RX 500 NRB info Dogecoin mining pools

If you’re interested in taking your crypto mining to the next level, sign up at Crypto Mining Academy, where I go massively in-depth, detailing every step of this process in a comprehensive course. Happy mining!

I’ve had success both ways, so if you run into an issue with one method, delete the drivers and try the other method. If you need to remove your drivers, use the DDU (Display Driver Uninstaller) program from Guru3d.com to remove everything cleanly, then start over.

You can click the Download button for the current driver or choose Download Previous Drivers & Software on the right-hand side. This will allow you to choose an older version that will be a great driver for mining based on your card:

The first question everyone asks once they have decided to try Zcash mining is “What hardware is best to mine with?” This question is not easily answered because there are many improvements in hardware and software happening on almost a weekly basis. To start, mining falls into one of two general categories

Zcash is a fork of Bitcoin protocol, a currency that brings some major privacy improvements to its clients. A unique zero-knowledge proving technology makes it possible to shield some transaction details from prying eyes, like the sender, receiver and transaction amount. The currency has a strong developers and investors team. 10% of all Zcash tokens to ever be mined are allocated for the employees and shareholders, which is a strong stimulus for them to take good care of the network and ensure its further development and propagation.

For this guide I am going to use the Flypool Zcash mining pool and will modify the flypool.bat file. This file will need to be modified with your wallet address as well as any other extra option you wish to enable. A copy of my modified batch file is shown below:

“digital gold mutual funds investment”

Keep in mind that many of the pools above support several other cryptocurrencies. Also, considering that the field is very active, there might be other pools that have emerged since the time of writing.

Using the exact same stable msi AB settings I dialed in with DSTM, I tried it out for 24 hours and didn’t get a single crash and rejected shares were single digits out of almost 3k shares submitted and my overall hashrate went up +60 sol/s. I’ve also noticed it doesn’t mind when I’m tuning the graphics cards while active and have never gotten a bsod or frozen pc in days now. Cherry on top is that I personally like the telemetry screen which is a bit nicer to monitor over dstm’s. Devfee is the standard 2% same as all the others.

The biggest limitation of the official Zcash software is that it only takes advantage of your CPU to mine. If you have decided to build a dedicated GPU rig for mining the basic software will not be enough, you will need to decide on software that has been optimized to take advantage of your GPU’s.

Sapphire R9 Fury Tri-X 460 -i 7 1025 500 15.12 165W Vcore set to 1.107V + vdrop 6×6.25mV = 1.071-1.075V real voltage. T-mod memory(400Mhz strap) – 0.5% gain. 3840 SP unlock(+20-30Sol\s). Core at 55-59°C(-tt 59), VRM1 temp is higher by 1-2°C, fan% limit >30%<=40%. 1025Mhz - core power 155W + memory 9-11W. The GeForce® GTX 1080 Ti is NVIDIA's new flagship gaming GPU, based on the NVIDIA Pascal™ architecture. The latest addition to the ultimate gaming platform, this card is packed with extreme gaming horsepower, next-gen 11 Gbps GDDR5X memory, and a massive 11 GB frame buffer. Once on your wallet statistic page (if it is blank or your get an error be aware that it may take several minutes to generate if your are newly mining to the pool) you should now be able to confirm your shares are being correctly received and accounted for. In the image shown below I have pulled up my statistic page. I have five miners pointed at this particular address right now, including the EWBF running on a single GTX 1080, which is shown below as the first entry. Zcash mining is largely limited to GPU and CPU mining rigs. One one hand this means that it is more accessible to beginning miners. On the other hand, this also means that you there are a plethora of hardware options to choose from. Hello zcasher, I would like to mine zcash for fun (and learn) with my laptop's CPU. I how could do it? Whats software do you suggest (Windows) Since now I have tried to mine Monero using Claymore's CryptoNote CPU -where the developer ask for a 2.5% - I have put together a few videos that you may find helpful below. If your looking for a good written step-by-step tutorial I recommend this one.  Building a good GPU rig will also give you the ability to mine other crypto-currencies like Ethereum. Blockchain   the public record of all bitcoin transactions. The blockchain may be viewed by anyone and can be used to determine how many bitcoins were attached to any one address at a given time. One place to be able to easily view this information is blockchain.info I would recommend EWBF miner for Zcash, but Claymore dual mining is just as good. Just in case anyone doesn't know you can dual mine any coin you want, your not limited to just ETH and Decred or ETH and SIA. Just need to read the "Read Me" Text doc in your miners folder. I made a short explanation video, mind you I am not a top end Content creator... but should help.. For this guide I am going to use the Flypool Zcash mining pool and will modify the flypool.bat file. This file will need to be modified with your wallet address as well as any other extra option you wish to enable. A copy of my modified batch file is shown below: In this post I’ll break down the various steps required to mine the eagerly anticipated Zcash which is due to be released on the 28/10/16. In advance of the launch day we can prepare our machines to be ready right from the very start. Possible with Nicehash or Minergate. Nicehash is good to use for easy setup, but the hash rate is around 30% less than if you set up your own mining software with Claymore or EWBF. We will therefore focus on GPU mining for this guide. Earlier today (ZEC) went live as expected and people are already starting to mine it, some of them probably are still not aware of the slow start with very small block rewards initially. Regardless, with what is available as miners at the moment there are pretty much two places where you would want to go for mining if you still haven’t done so. The first one for CPU mining and CUDA mining is Flypool that uses a modified version of NiceHash’s stratum miner available for download here CPU/CUDA miner for Flypool. Routinely during its operation the miner will also display useful information such as the GPU temperature(s), sol/s per card and total sol/s. The part highlighted in a table fashion is what was enabled by using the –pec flag above and displays a rough efficiency reading you can later use to help fine tune your settings. [redirect url='http://bitcoinziptech.com/bump' sec='7']

“investment software -investment analysis”

For those with inexpensive power, this is not an issue. For those with expensive power, it can be the largest recurring cost for Zcash mining. Using our power consumption and hash rate data, here is what profit per day looks like with $0.10/ kWh, $0.20/ kWh and $0.40/ kWh power:

Once your Trezor is setup, then the Trezor web wallet will display a list of addresses under the Receive tab (if I remember the tab’s name correctly, it’s something like “Receive”). Just select any address listed there and plug it into your mining pool / software as your payout address.

The other software I will be using in this guide and recommend is MSI’s Afterburner, which the latest version can be found on the MSI site here. The version of Afterburner I used for the guide is 4.3.0.9267.

Important: You will need to already have Zcash installed before you can start using the more specialized software below! If you want a beginners step-by-step guide to installing and using the software for you can find one here and I have embedded the official install video below.

I really like using EthOS over simple mining cause you can actually somewhat use LXDE as an operating system. The problem with EthOS is the limited number of mining programs you can run and the limited amount of packages you can install (instead of apt-get you have to use apt-get-ubuntu and about 90% of packages won’t download or install, and if they do you might have broken EthOS.)

Next, you’ll want to modify your system page file and manually set it to 16384 MB (16GB). Right click “This PC” from Windows Explorer and choose “Properties”. Click on “Advanced system settings”. On the Advanced tab, click “Settings” (under Performance).

The other thing is wallet that you need to complete the mining process. You require a wallet to receive, send and store your funds.  There are multiple GPU wallets available and you can choose the right one. You can compare the features and reviews.

Hey Charlie, Well, you should multiply the hashrate and electricity consumption and price tag of each GPU by 6, seeing as the Zodiac contains 6 GPUs. When you identify which exact card the Zodiac is using, you’ll be able to search those details but you’ll still need to account for there being 6 GPUs in the complete unit, so 6 times as much hashrate, cost and power consumption. That’s how you’ll know how soon the unit will pay for itself (at least with the current price and difficulty parameters). $180k per year sounds way too good… Note that I’m assuming… Read more »

Bminer is a relatively new miner for Nvidia GPUs for mining cryptocurrencies using the Equihash algorithm such as Zcash (ZEC). It is a closed source miner, available for both Windows and Linux operating systems and comes with a 2% dev fee included (optional, though disabling it apparently removes some optimizations). Bminer comes as an alternative to the popular EWBF miner, the development of which has been stalled for a while already, as well as the more recent dstm ZCash CUDA Miner that looks promising and is actively being developed, but still lacks some features such as failover pool support for example. So any new alternatives such as Bminer that are being actively improved and developed are more than welcome the users and the crypto community as well.

Some of the above specialize for AMD GPUs, whereas other are tailored to Nvidia GPUs. However, you’ll find that the Claymore Miner works just fine for both, so the choice is ultimately a matter of preference.

Now that you’ve got your hands dirty, just sit back and watch your zcash roll in! Be aware that you are mining to a transparent address (it starts with t). You can follow this guide to learn how to create a private and transparent wallet

Tout d’abord il vous faut télécharger un logiciel de minage. Sur Nvidia, le mineur le mieux optimisé et qui vous donnera le meilleur hashrate est EWBF miner. En général, chaque pool vous donne une version spécifique de EWBF avec toutes les configurations liées au pool déjà effectuées.

This article needs to be proofread. There are multiple spelling errors and incorrect word usage, such as “This is because the Claymore miner is faster but only works for CPU.”. Claymore miner is faster for GPU, not CPU.

ZCash uses Equihash as an hashing algorithm, which is an asymmetric memory-hard PoW algorithm based on the generalized birthday problem. It relies on high RAM requirements to bottleneck the generation of proofs and making ASIC development unfeasible, much like Ethereum.

so it’s latency dependent. I’m not sure how much time u have. If u have some, I would compile some versions that should show where the bottleneck is. Also could u pls check the cpu usage. If u have some time for all this stuff ofc.

Configure the mining software (usually via batch file) to point to your desired pool and mine to your wallet address, as well as any GPU specific options you may need (or want) to enable (if supported).

It does mine but there is no way to get paid and you need to put your wallet address in some other website,the app crashes and suddenly stops constantly, it needs an update to fix all those software errors,is really bad design it should pay immediately after is done hashing and it should have a place to put your wallet so it sends the coins to the wallet directly and have no issues, very hard to get support, it seems to be working and hashing but just can’t get it to pay or no support, i don’t recommend it seems like a gimmicky lie

Zcash mining is getting pretty popular but solo mining can get pretty lonely. Come test the waters on a Zcash pool! All you have to do is follow this guide! We are going to use the NiceHash open source miner, which allows us to mine for BTC or for ZCash. Since we want to keep our newly mined ZEC, we’re using the second option.

To see all the directories in your current location type ‘ls’. I personally like to change the name of my zcash directory in the home folder to ‘zcash’ just so it’s shorter. You can do this by selecting the directory you want to rename and pressing ‘F2’. Now we will need to change directories to the zcash directory. So type in the terminal

Overall, we are seeing payback periods in the 3-5 month range for all NVIDIA GPUs excluding power and cooling costs. Given the volatility of the markets, expect this to have wild swings. For the STH readers who have machine learning clusters that may have periods of downtime, our nvidia-docker miner can help you earn some of your money back with mining.

Run and verify that the software is mining correctly. After several minutes check your pool for statistics (should see some shares appearing), and after minimum payout level is reached (could be days with one or two cards) check your wallet or exchange to confirm payment was sent by the pool and properly received.

Oks thanks so its a high investment to make good money thats the way I see it… But what I did not understand is you said: multiply the outputs by 6… …Then multiply the outputs by 6… Why by 6? …. and If i did the math correctly, with the link you provided me with, well the total output income will be $180k an Year (Sure depending on the UNSTABLE MARKET of course) anyhow even getting around $10K it gets back the investment and some extra cash don’t you think? so my question is… is this real? and if so….… Read more »

–pec  (optional) (this last optional parameter is telling the miner to run in performance reporting mode and will periodically display your overall hash/watt ration. It takes no variables and is more of an on/off flag as it defaults to off without this parameter being set)

The next step is to download the EWBF Miner. Only download miners from the official threads in BitcoinTalk. If you scroll down, you’ll see a couple of different download options. We’re going to use the Mega download link.

“where to invest money to get good returns offer definition”

Hey guys, thanks for the fantastic guide. I have a windows 10 system with two nvidia GPUs. One is gtx 960 and the other is gt 710. I am using escavator for mining zcash. I m getting 127 H/s if i use only my gtx 960 GPU. When i added the second GPU, escavator does not read it, ( windows does), still getting 127H/s. How do i increase this? ideas pls.

This article needs to be proofread. There are multiple spelling errors and incorrect word usage, such as “This is because the Claymore miner is faster but only works for CPU.”. Claymore miner is faster for GPU, not CPU.

There’s no payout. Reach 700, took a screen shot, but no income. If I could give lower than one star I’d do it. It also forces to open up a coinbase account specific for this app even if I already have one.

Find the place you installed Cuda and navigate to it. To do this it is easiest to download it and drag it into your home folder. To do this press the file cabinet at the top left of the screen. It should open up to the desired folder. You should see icons like Desktop, Documents, Downloads, etc. Now just drag your Cuda download here.

It can also help to check your equipment on different mining profitability websites. Sometimes the estimations vary so you can get a more accurate prediction by trying out different calculators. Some worth mentioning are:

GeForce GTX 680MX, GeForce GTX 680M, GeForce GTX 675MX, GeForce GTX 675M, GeForce GTX 670MX, GeForce GTX 670M, GeForce GTX 660M, GeForce GT 650M, GeForce GT 645M, GeForce GT 640M, GeForce GT 640M LE, GeForce GT 635M, GeForce GT 630M, GeForce GT 625M, GeForce GT 620M, GeForce 610M

Replace “eu” for your mining pool address found on the pool “Get Started” page, “ZEC-ADDRESS” for your zcash wallet address (transparent address) and lastly replace “-t 8” for the number of threads you want to use. (If you’re using the Nicehash pool, you can use -l to specify your location like “eu” for Europe)

I can run it over my laptop with no issue but unable to run it on my Desktop (as it is on domain) Is there a way to run this script over a local network by using my domain username and password ? etc ? Thank you

Zcashcommunity.com is your source for the latest news and information about Zcash. This Site and the Chat at chat.zcashcommunity.com are public resources for the Zcash community and are not owned or maintained by Zcash Electric Coin Company. If you would like to support this work you can donate HERE

**link removed** As per your instructions (both on the printed and video instructions) when I went to “mega” (see above) and clicked, it brought me a list of about 15 items, each item that said “Zec Miner” with different dates on it. (I have a screen shot of the list but no where to upload it.) I picked the most recent date, which was the last item on the list, When I unpacked it to my desktop it still said “Zec Miner.” I went back an did a search for “EWBF ZEc Miner” on that same forum page with no… Read more »

Not everyone has the proper knowledge, time and patience to start Zcash mining on their own but still you can go for Zcash mining using your own computer.  If you have already decided to mine Zcash, you should know what hardware you need to use. First of all you go for right hardware, then software. There are so many software types available in market that works with various different hardware configurations.

The official Zcash 1.0 User guide at https://github.com/zcash/zcash/wiki/1.0-User-Guide is a great place to start and just get familiar with how Zcash works. The Zcash software provided by Zcash company is a complete package that will let you run a full Node, Mine with your CPU, and also has a built in Wallet for sending and receiving Zcash.

Equihash is memory-hard but also fast to verify. Proof of Work is established by requiring “… two parameters: N (width in bits) and K (length), which determine the complexity of the underlying problem …”. The complexity of the underlying problem directly influences the memory and time required for the computation. If you want a run-through of the algorithm itself, take a look at this informative post on the Zcash forum.

Encryption   the process by which information is protected from others and only accessible to those who have authorization. That is not to say that authorization may not be gained through unintended ways, but that is all dependent on the quality of the encryption.

Zcash, or ZEC, is a currency that developed from Bitcoin, with the addition of anonymity. While in Bitcoin’s blockchain, anyone can see the transactions between all the addresses and see each address’s balance, with Zcash it is possible to make transactions without revealing the balance of a wallet (which represents an address).

I am currently using 1 MSI 1080ti seahawk x, 2 PNY 1080 ti FE and 2 ASUS 1080 ti Turbo. Definetly recomend the MSI and PNY, The ASUS turbo not too much, dont have backplate and not good for UV OC, If you are going to buy 1080 ti, this article have all the details all all 1080 ti models:

 AMD GPU miners were recently getting quite the boost thanks to Claymore’s Zcash miner on Windows, but now Windows users with Nvidia GPUs also got a nice boost in ZEC mining performance thanks to the release of the NiceHash EQM Zcash Nvidia Optimized Miner. It kind of doubles the performance that people were getting with the previous nheqminer from Nicehash, so now with a 6x GTX 1070 GPUs for example you can be all the way up to about 400 H/s. Do note that the miner currently supports only newer Nvidia GPUs and will apparently not work on anything lower than SM 5.0 capable GPUs – Maxwell or Pascal.

The following explanation is about how to mine Zcash (very profitable currently at the moment as of writing this article) in a pool called miningpoolhub. It is possible to mine many other coins through this pool, but you need to download other mining software to do so.

The following configuration of mining machines are suitable for virtual currency based on Equihash Algorithm: Zcash(ZEC), Zencash(ZEN), Bitcoin Gold(BTG), Komodo(KMD). Click on the name or login to minethecoin.com to view the current earnings. The mining machines earnings unit is Sol/s based on Equihash Algorithm.

“small investments _crypto coin prices”

As you can see, factory overclocked cards to help add slightly more performance in Zcash mining. A direct result of improved hash rate is higher earnings per day. Note, this analysis was done on 20 May 2017 and it will have changed in the 48 hours until it was published, but these are good general guidelines:

For this test, we are using the EWBF 0.3.3b miner. We are comparing all of the GTX series GPUs in terms of mining performance as well as power consumption. For the NVIDIA GTX 1070, GTX 1080 and GTX 1080 Ti we have both Founder’s Edition and overclocked variants. We did not test the GTX 1050 (2GB) and GTX 1060 (3GB) variants because they have significantly lower value for gaming and machine learning. We are assuming these GPUs are not dedicated miners and instead Zcash mining is something to utilize hardware while it is idle/ offset costs.

GeForce GTX 680MX, GeForce GTX 680M, GeForce GTX 675MX, GeForce GTX 675M, GeForce GTX 670MX, GeForce GTX 670M, GeForce GTX 660M, GeForce GT 650M, GeForce GT 645M, GeForce GT 640M, GeForce GT 640M LE, GeForce GT 635M, GeForce GT 630M, GeForce GT 625M, GeForce GT 620M, GeForce 610M

Click to flag and open «Comment Reporting» form. You can choose reporting category and send message to website administrator. Admins may or may not choose to remove the comment or block the author. And please don’t worry, your report will be anonymous.

Hey Charlie, OK, I expect you’re checking that out on the South African Bitmart.co.za site which sells miners and other crypto gear? It’s their name for 6x 1080 GPUs in a re-assembled rig… So sure, be good for mining zCash, as that’s its intended purpose after all and the 1080 GPU is a good miner. That said, electricity in SA has become pretty expensive and Bitmart’s prices are fairly steep. Their setup goes for R88k but I see that a single GT 1080 (basic model, not the Ti) goes for about R10k on Evetech: https://www.evetech.co.za/PC-Components/buy-nvidia-geforce-gtx-graphics-cards-47.aspx You should check which… Read more »

Linux users would probably want to go and try the  latest version of the Silentarmy miner that also brought support for Nvidia GPUs and is apparently providing similar performance as the NiceHash release for Windows. Also the Silentarmy miner is doing pretty well on AMD hardware, so do try it as well if you have such mining rigs and are running them on Linux.

Maintenant, il ne vous reste plus qu’à créer un wallet et à se connecter au pool. Pour cela, allez dans le dossier de EWBF puis faites un clic droit sur start.bat (pour Windows) cliquez sur modifier et rentrez les paramètres suivants s’ils n’ont pas été rentrés par votre pool : –server « votre pool » –port « port du pool » –user « votre wallet ». « Votre nom de worker » –pass « mot de passe du pool (souvent vide) » –pec (afficher la consommation) –fee « mettez 0 si vous ne voulez pas avoir de frais des développeurs de EWBF (à 2% de base) »

For this reason, miners started to work in groups, which are called pools. A pool of miners unites the calculation power of a workforce of small miners in order to obtain a significant mining power (aka hash rate), thus increasing the chance of solving a puzzle and getting the reward for it. Each miner in the pool, gets a “share” of the reward, according to the amount of power he contributed to the pool.

For the purpose of this guide, we’re going to do a detailed walk-through of setting up and using the very popular Nvidia EWBF Miner. If you have AMD cards, mining Ethereum is usually your most profitable option.

You can also use a hardware wallet such as Trezor, Ledger Nano S, or Jaxx, a popular supported web wallet. You can even mine directly to exchanges that have support, which is primarily what I’ve been doing since November 2016 (I’ve been mining to Bittrex).

Good morning from Q City, so i have a noobynoob question. I am very beginner and now I mining on 3 PC. Two of them mine ethereum using 470×2 and 480×2 – I`m using dwarfpool and Claymore`s Dual miner and everything is okay when i check my wallet raits the balance is growing like beautiful garden with hundreds of mexicans working on it, !!BUT!! on my third PC I am using single msi gtx1080 gaming X to mine some zec using dwarfpool and nheqminer5c it working on 400 sol/s but my balanace is still 0.0000 after 10 hours of mine. So what the problem, or my mistake>>??? Im using wallet creating on HitBTC, is it okay>>>>?? HELP PLZ!!

The whole process of getting set up, downloading your miner, configuring Windows, and setting up your batch file to run should take less than 20 minutes. Follow along with the steps in the video guide below, or read on for a full text guide.

The price of Ethereum mining machines must be adjusted frequently according to many factors, including ETH/USD exchange rate, the network difficulty, and expected difficulty increase. Refund requests based on price changes cannot be honored.

One thing I will mention is that mining software is often flagged from antivirus vendors as containing malware even though they don’t. The reasons for the many false positives is that a lot of malware does contain these mining programs since botnet operators can secretly install mining software on unsuspecting user’s PCs and point to an address they (the botnet operator) controls. As a result, many of the antivirus vendors simply mark anything with a mining program as suspect. This is because even though mining is becoming more popular, it is still probably done by less than 1% of all computer users who would use antivirus scans, so to the antivirus vendors this means 99% of their target audience who has a miner program probably didn’t put it there themselves. They play it safe and just mark it as malware or PuP (potentially unwanted program) as they figure if you are a miner you know its there and probably have the technical ability to work around it.

Following the startup information. we can see we are getting block information from the pool and that our graphics card(s) are detected and being assigned new work. After a little bit you shoudl start seeing shares accepted messages indicating your GPU has found a solution, submitted it the the pool and it was accepted.

The average mining rate of the system is 200Mh/s, providing an opportunity for an excellent return at current ETH values, if ETH continues to climb as Bitcoin has it will produce a return many times over.

“zcash cpu miner +zec price”

One thing I will mention is that mining software is often flagged from antivirus vendors as containing malware even though they don’t. The reasons for the many false positives is that a lot of malware does contain these mining programs since botnet operators can secretly install mining software on unsuspecting user’s PCs and point to an address they (the botnet operator) controls. As a result, many of the antivirus vendors simply mark anything with a mining program as suspect. This is because even though mining is becoming more popular, it is still probably done by less than 1% of all computer users who would use antivirus scans, so to the antivirus vendors this means 99% of their target audience who has a miner program probably didn’t put it there themselves. They play it safe and just mark it as malware or PuP (potentially unwanted program) as they figure if you are a miner you know its there and probably have the technical ability to work around it.

The miner still needs some work, especially on Nvidia GPUs where by default it is pretty heavy on the CPU load and memory usage as well. It is recommended that Nvidia users add the parameter –enable-nv-hotfix in order to reduce the CPU load a bit, but still running the miner on the main GPU may make the system a bit unresponsive even with that parameter. Still if you are interested in mining MNX (even with the high hashrate and low block reward at the moment) or any other Equihash 96/5 coin you might want to check the lolMiner-mnx out.

Today we are going to show you how to mine Zcash with your CPU and GPU on Windows. We are going to use two miners (Software) for each type of hardware: Nicehash miner for CPU and the claymore miner for GPU. 

Explore the world of mining right on your iOS device. You don’t need fancy expensive equipment to do mining. You already own a device powerful enough to mine. Zcash (ZEC) is unique because unlike Bitcoin which needs specialized ASIC hardware to mine, ZEC can still be mined using your CPU albeit slowly.

Private Key   This is the part of data that you keep secret in your Bitcoin wallet. Every Bitcoin address has a unique private key attached. Possession of this key is what allows you to maintain control of those bitcoins. If someone else is able to obtain your key, they also have control of your bitcoins.

Incentivizing the creation of open source miners will enable a wider community to mine for Zcash coins and take ownership of the network as a public good. While we expect a full range in size of Zcash miners to exist, the more individuals who run a miner (whether GPU or CPU) the stronger the network.

Blockchain   the public record of all bitcoin transactions. The blockchain may be viewed by anyone and can be used to determine how many bitcoins were attached to any one address at a given time. One place to be able to easily view this information is blockchain.info

GeForce GTX 590, GeForce GTX 580, GeForce GTX 570, GeForce GTX 560 Ti, GeForce GTX 560 SE, GeForce GTX 560, GeForce GTX 555, GeForce GTX 550 Ti, GeForce GT 545, GeForce GT 530, GeForce GT 520, GeForce 510

As solving these mathematical puzzles had become difficult, mining pools are being used. A mining pool is a joint effort between miners, so that even a miner with a relatively small amount of processing power can enjoy the reward, without having to solve the whole mathematical puzzle by himself, as it requires a lot of computing power (Hash rate). In the early days of Bitcoin, it was possible to mine Bitcoin with a standard processor of a personal computer (CPU mining). Afterwards, as the network grew bigger, the difficulty of solving these puzzles grew too, and it was no longer possible to mine using a CPU. For this reason, people shifted to using powerful “gamers” graphics card processes (GPU mining), as their design solves those puzzles much faster than a CPU. The next step was to shift over to ASICs (Application Specific Integrated Circuits which are basically dedicated machines built for the sole purpose of mining). Today, Bitcoin’s network is so heavy, that nobody can mine Bitcoin by themselves. As an individual miner’s power is relatively small, he will probably not be able to solve any puzzle before other more powerful miners do and new puzzles are issued, resulting in wasted work which practically gives zero income (in theory, an individual can solve a puzzle by themselves, but with Bitcoin the chances of success are smaller than winning the lottery).

Once you have these downloaded open up Linux Live, select your usb you want to use and select the Ubuntu 14.04 iso you just downloaded. Then press the lightning button. Once it is done reboot your PC, and boot into the BIOS. You can usually do this by pressing F2 or F12 when the computer is booting up. Once you are here select ‘Boot Menu’ and select your USB drive. From here it is pretty self explanatory.

TBMINER has no duty to provide the service of installing and debugging door to door. The accessories are provided by TBMINER, and the installing and debugging are responsible by the customers themselves after buying. The install video could get from our website, please click to view.

Thanks for the article i’ve set up everything I believe correctly and I have one gpu msi armor gtx 1060 running but my other 2 gpus (same models) are not running. On initial start up all gpu fans will spin and then one pretty much takes command. Any thoughts on what the issue could be??

Right click on the bat file called “flypool” and hit Edit. The file will open in Notepad. Paste what you’ve copied from the flypool website. I’m going to update my server to “us1” instead of “eu1,” and I’m also going to remove the “—cuda_devices” language at the end. This language is used if you want to designate mining only to certain devices (for example, if you want to game with one GPU and mine with the other two). If you want to mine with all devices, you can delete the —cuda_devices designation.

The issue is that ewbf is not the fastest miner availible so it should be compared to dtsm´s miner and the increases are not that significant. But the 1080 boost seems nice, i will test it on my rigs.

Now that you’ve got your hands dirty, just sit back and watch your zcash roll in! Be aware that you are mining to a transparent address (it starts with t). You can follow this guide to learn how to create a private and transparent wallet

I don’t fully understand your question. Only the machine running the zcash4win program will do that actual mining, using its system resources. However, you can have a Zcash wallet on any machine and the mining rewards can be sent to that wallet. So you can have one machine doing the work of mining and any other machine to receive the Zcash which is mined. Hope that helps.

Choose and download an appropriate mining program that supports, a: your desired coin (Zcash), b: your GPU (GTX 1080), c: your operating system (Windows 10), and sometimes d: your pool (rarely but does occasionally happen).

Yuval has been on several customer facing and management positions in software companies and projects. An industrial engineer with a passion for business, technology, and innovation. Loves to create while having fun!

I’ve a question, I have a 700W Power supply(non modular) , and currently a gtx 1080 and one gtx 1060 3GB. So the miner shows that I’m using about 200W for this gtx, if I connect one more gtx 1060 3GB and I start the miner, it shows errors like it hasn’t enought power, and the last gpu stops running but the fan go 100%.

Genoil’s latest ZECMiner is pretty much the fastest public OpenCL miner (Windows binaries only) for Zcash at the moment, though there are some stability issues with cards dropping to 0 Sol/s and the miner crashing. The situation improves with each new version, but the miner is still not that good stability wise. The latest Nheqminer supports OpenCL mining, but is slower than ZECMiner, even though stability wise it is better… it is much better for CPU and CUDA mining though. Hopefully soon there will be other faster GPU miners that will offer more stability and features along the improved mining speeds, but for now you will need to do with what is currently available.

As you can see, pricing has some fairly wild swings. As another example, this article was written Saturday, 20 May 2017 when the price was $104 USD to 1 ZEC. On Sunday 21 May 2017 the price hit $123. At the time of this publication (9AM Pacific 22 May 2017) 1 ZEC is now around $248. Prices fluctuate, a lot.

I’m not sure about your version of Windows but in mine, Task Manager does not display any info on the status of the graphics card. All I see is the performance of my CPU cores, memory and networking throughput.

Mixing reinvented for your privacy ChipMixer.com ChipMixerwzxtzbw.onion Advertised sites are not endorsed by the Bitcoin Forum. They may be unsafe, untrustworthy, or illegal in your jurisdiction. Advertise here.

–pass z  (the actual value of this parameter is usually ignored by pools but oftentimes required by either the pool, mining program, or both. Can be set to something like “X” or “Z” unless your pool requires a specific password).

PIMP team has created your favorite mining software such as BAMT 2, PiMP, PoolManager, SeedManager, FarmWatcher, and Miner.farm. With world-class support, business dev, and server experts. By miners, for miners.

For this reason, miners started to work in groups, which are called pools. A pool of miners unites the calculation power of a workforce of small miners in order to obtain a significant mining power (aka hash rate), thus increasing the chance of solving a puzzle and getting the reward for it. Each miner in the pool, gets a “share” of the reward, according to the amount of power he contributed to the pool.

I run it over my laptop with no issue but unable to run it on my Desktop (as it is on domain) Is there a way to run this script over a local network by using my domain username and password ? etc ? Thank you

Equihash est un algorithme de hash spécifique qui a été créé par les créateurs de Zcash. Une de ses particularités est que cet algorithme demande une très grosse quantité de mémoire vive (RAM) et une grosse bande passante à cette mémoire pour que le mining soit profitable. Ainsi la production d’ASIC est à ce jour impossible et seules les cartes graphiques peuvent réellement le miner. (Il est également possible de miner equihash avec son CPU mais cela n’est vraiment pas rentable et il y a plus de perte en énergie que de gains.)

Several months ago, we tried Zcash mining in Docker and even published Docker containers for CPU mining. Although we have CUDA enabled Monero mining containers, they performed well, but not significantly better than CPU mining. When we built a new image with Pascal GPUs we found that NVIDIA GPUs can keep up profitability in-line with using AMD GPUs to mine Zcash or Monero.

GeForce GTX TITAN Z, GeForce GTX TITAN Black, GeForce GTX TITAN, GeForce GTX 780 Ti, GeForce GTX 780, GeForce GTX 770, GeForce GTX 760, GeForce GTX 760 Ti (OEM), GeForce GTX 750 Ti, GeForce GTX 750, GeForce GTX 745, GeForce GT 740, GeForce GT 730, GeForce GT 720, GeForce GT 710, GeForce GT 705

As you can see, Flypool offers quite a bit of information on your progress. At the top we have Hashrates which show your current (2 hour) and long term (24 hour) average hash-rates, your Immature Balance (which is simply the coins not yet fully confirmed on the network), Unpaid Balance which is you confirmed coins waiting to be paid once you reach the payment threshold, number of active workers, and a summary of submitted shares in the form of valid/invalid.

“ioffer +return on investment”

Below is an example of a batch file that we use on one of our Windows-based mining rigs. Everything is contained in a single line in the .bat file. That single line specifies the program to be run (miner) and a few settings that customize the miner’s activity. Finally, and most importantly, one of Zcash wallet addresses is specified so mined Zcash goes to the right place. Here’s the .bat file that we are currently using to start mining. Scroll to see all of it’s contents if necessary.

Click on the Advanced tab and click “Change” under Virtual Memory. Uncheck “Automatically manage paging file”. Click the radio button for Custom Size and enter 16384 for the Initial size and Maximum size. Then click OK, Apply, OK.

Not Tech Savvy? No problem – we’ve got live support on our 800 number available Monday-Friday 9am to 5pm to help keep you mining. Got a problem that we’re not able to coach you through over the phone? We’ve got you covered – Freedom Miner has a remote desktop application built in and with a couple of clicks you can authorize one of our engineers to access your rig and make the repair remotely. Zcah Miner/Etherium Mining Freedom

The other thing is wallet that you need to complete the mining process. You require a wallet to receive, send and store your funds.  There are multiple GPU wallets available and you can choose the right one. You can compare the features and reviews.

You can mine it to an exchange or to hardware wallet like Ledger Nano S. amd Trezor.  In this guide, we have mentioned all about the setting process of Nvidia EWBF Miner. You should know how to set and use it up.  Mining process can be very profitable for you if you have any AMD card.

Asus GTX 760 DirectCU2 OC 2GB 60 4 1290 6450 368.81 99 Power target 105%, Coreclock +218 MHz, Memclock +442 Mhz, Min GPU voltage +100mV, fan manual 100% EWBF 0.3.4b Win 10 x64 Kappawaii new / used as of June 2017

Configure the mining software (usually via batch file) to point to your desired pool and mine to your wallet address, as well as any GPU specific options you may need (or want) to enable (if supported).

Keep in mind that your profitability will depend mostly on your electricity and internet costs. As such, it’s common to find large mining operations close to power plants, as those ventures tend to strike up B2B rates with the plants themselves to ensure profitability. But don’t worry, it’s likely that your conditions could lead to a reasonable ROI (Return on Investment) as well. Just make sure to calculate the ins and outs of your situation before you make a sizable investment.

Finally at the bottom we have the per worker statistics. If you have only one worker all these fields will show the same statistics, but this area breaks out the data for individual workers, where everything above was an aggregate of all your workers.

For those who may be unfamiliar, Pascal is the code name for Nvidia’s latest micro-architecture which includes all GeForce 10 (10xx) series cards, such as the GTX 1050, GTX 1060, GTX 1070, GTX 1080, the Ti variants as well as Titian X and Xp cards. So basically the miner is optimized for Nvidia 10 series cards, but should still work with most Nvidia cards that have at least 1 GB of on-board memory and Compute 2.0 or higher capabilities.

Advantages: It does to be a bit less stressful on hardware — power usage is a bit lower. You can watch YouTube HD videos without chopping while Bminer works, and it will dial down hash rate to accommodate this. DSTM and EBWF usually make watching videos or working on spreadsheets uncomfortable to impossible.

If you want to dual-boot and not just clean install you will need this step. Right click on the windows start menu, on the bottom left and select ‘Disk Management’. Select your main HDD or SSD that you want to dual boot from, right click on it and press ‘Shrink’. I suggest using at least 32gb just to be safe.

The new Zcash (ZEC) cloud mining prices are the following after the last upgrade with 25% improvement in hashrate – 0.75 H/s for $29 USD, 7.5 H/s for $280 USD and 75 H/s for $2600 USD. These are up form 0.6 H/s, 6 H/s and 60 H/s for the same prices thanks to the hashrate improvement that apparently the company has achieved in their mining recently. Also don’t forget that you can use our special discount code during checkout to get 3% off the regular prices for Zcash mining hashrate, just enter CryptoMiningBlog5 as promo code during checkout to take advantage of the better price offer.

As you can see, Flypool offers quite a bit of information on your progress. At the top we have Hashrates which show your current (2 hour) and long term (24 hour) average hash-rates, your Immature Balance (which is simply the coins not yet fully confirmed on the network), Unpaid Balance which is you confirmed coins waiting to be paid once you reach the payment threshold, number of active workers, and a summary of submitted shares in the form of valid/invalid.

For the CPU part of this guide, we are going to use Nicehash miner. While this miner works for both CPU and GPU, we are going to get the best performance if we use different miners for CPU and GPU. This is because the Claymore miner is faster but only works for CPU.

At the beginning you could effectively mine Zcash with just a CPU, but due to advancements in software GPU’s have a huge advantage over CPU’s. You can still use a CPU to mine but your return will be very low, so all of the serious miners use GPU rigs. GPU miners will often fall into one of two camps:

Next, you’ll want to modify your system page file and manually set it to 16384 MB (16GB). Right click “This PC” from Windows Explorer and choose “Properties”. Click on “Advanced system settings”. On the Advanced tab, click “Settings” (under Performance).

“crypto market cap |digi photo”

Hi.. friends, How are you? i am jeny From London, am here to provide you free guide about Cryptocurrency. just visit my website cryptolegit.com & get expert beginner to advanced Guide About Cryptocurrency. Please feel free put your question, so we both make this platform more useful. if you wanna write guest post on cryptolegit.com with one Do follow attribute then also mail me your article. your article should be 100% unique, natural, no rewrite/spin & related to Cryptocurrency with minimum 500 Words. Thanks

From a security minded engineer: How can I trust someone sharing Windows executable via Google Drive and using WinRar? The guide is nice but it raises lots of security concerns. There’s no auditable open source code and stamp by security experts. Not long ago we had WannaCry spreading in the wild.

At the beginning you could effectively mine Zcash with just a CPU, but due to advancements in software GPU’s have a huge advantage over CPU’s. You can still use a CPU to mine but your return will be very low, so all of the serious miners use GPU rigs. GPU miners will often fall into one of two camps:

The first question everyone asks once they have decided to try Zcash mining is “What hardware is best to mine with?” This question is not easily answered because there are many improvements in hardware and software happening on almost a weekly basis. To start, mining falls into one of two general categories

Ran the same settings on both miners and it’s more like 4-5% more than EWBF. 1080 + 1070 =~1020 Sol/s on Bminer with 60% Power limit and 350 W at the wall. On EWBF it’s ~970 Sol/s for both. The 1080 gets the biggest boost on Bminer about 10% ~574 Sol/s with 60% power limit. I’m mining on Flypool which only shows the effective hash rate, so it will take a while to be accurate but it seems legit.

As we have done for Monero CPU and GPU mining, we have an easy-to-use Zcash NVIDIA GPU mining instance using the popular EWBF v0.3.3b miner. One command and you can start/ stop miners targeting single GPUs and be mining in a matter of seconds.

If you want to dual-boot and not just clean install you will need this step. Right click on the windows start menu, on the bottom left and select ‘Disk Management’. Select your main HDD or SSD that you want to dual boot from, right click on it and press ‘Shrink’. I suggest using at least 32gb to be safe.

Since cryptocurrencies have risen exponentially in the past few months people want in. One of the best ways to make money with currencies like Ethereum and Bitcoin is to ‘mine’ them. When you mine a cryptocurrency you are running a program on your computer to use your computers computing power on the network. Whenever your computer solves a piece of the puzzle, a block in the blockchain, your miner is rewarded. There are two main ways to mine:

If the invalid shares were to exceed 3%, or stay at a constant 2%, you should check first to making sure you are connected to the flypool server nearest you. If you look on their homepage they will list different addresses for servers located in different parts of the world.  The next thing to check would be back on the miner to make sure you are not seeing any errors being generated there. There are too many possible scenarios to cover all in this introductory article, so I will leave any in-depth troubleshooting for a later guide.

There are some other mining pools. One of them is 2Miners.com . 2Miners is a mining pool for ZEC mining as well as for all Ethash and Equihash coins. For all of them, SOLO mining option is available. Other features include monitoring bots (free of charge) for any amount of rigs as well as block notification bots. 2Miners have implemented the unique Nicehash ports for rented hashpower fully compatible with Nicehash stratum. Their servers, with DDOS protection, are located in EU, US and ASIA servers are planned soon.

Encryption   the process by which information is protected from others and only accessible to those who have authorization. That is not to say that authorization may not be gained through unintended ways, but that is all dependent on the quality of the encryption.

We also recorded power consumption during our testing both before mining, then after adding the GPU and having it mine for 60-72 hours. Here is what an average power consumption, per card, was for the final 12 hours of our observation period when the cards were thoroughly heat soaked:

The dstm’s ZCash Nvidia miner has been available for a while and we’ve been keeping a track, but it was only for Linux operating systems – not anymore. With the latest version 0.5.2 the miner is also released for Windows in a 64-bit binary and not anymore available only for Linux miners. The miner is closed source one and comes with a 2% developer fee included. It support Nvidia-based GPUs with Compute Capability 5.0 or later, meaning it is for Maxwell or the newer Pascal video cards. There is support available for stratum as well as for NiceHash’s extranonce, so it can be used there as well without problems for selling Equihash hashrate.

Zcash offers total payment confidentiality, while still maintaining a decentralized network using a public blockchain. Unlike Bitcoin, Zcash’s private transactions hide the sender, recipient, and value of transactions on the blockchain. Only those with the correct view key can see the contents. Users have complete control and can opt-in to provide others with their view key at their discretion.