“liqui +digital gold”

The whole process of getting set up, downloading your miner, configuring Windows, and setting up your batch file to run should take less than 20 minutes. Follow along with the steps in the video guide below, or read on for a full text guide.

In order to mine using this guide, there are two things that you’ll need. The first is a wallet to store your funds. There are currently multiple GUI wallets available and you can compare them here. You can also use this guide to learn how to install one of them on Linux. It is also possible to use an exchange as a wallet but we do not recommend it.

The good news is that getting started with Zcash mining is very simple. You don’t need to download the full Zcash blockchain or manage clunky command-line miners with manual instructions; you can mine directly to an exchange or to a hardware wallet such as Trezor or Ledger Nano S. Of course, you should always do your due diligence to ensure your coins will be properly supported before sending them anywhere.

The other software I will be using in this guide and recommend is MSI’s Afterburner, which the latest version can be found on the MSI site here. The version of Afterburner I used for the guide is 4.3.0.9267.

The issue is that ewbf is not the fastest miner availible so it should be compared to dtsm´s miner and the increases are not that significant. But the 1080 boost seems nice, i will test it on my rigs.

Galax GTX 1080 Ti HOF 790 2062.5 5400 382.53 200 Undervolted to 1v for GPU / Mem stock. max 800 Sol/s / +120 MHz Core – +400MHz Mems. 60-63C max with A/C – 65-66 without. EWBF 0.3.4b Win 10 x64 EllinasUser

Digital currencies are mine to a transparent but it can be spent to shielded address or Z-address. This currency should be swept out of the transparent address in one transaction without any changes.  You should use the Z-sendmany command to send currencies from a transparent address to shielded address. You need 4GB RAM for this process.

For the CPU part of this guide, we are going to use Nicehash miner. While this miner works for both CPU and GPU, we are going to get the best performance if we use different miners for CPU and GPU. This is because the Claymore miner is faster but only works for CPU.

For me, i’ll select the US server as shown. Make sure to also include the port number. In the config.txt, I will insert ‘-zpool us1-zcash.flypool.org:3333’. Simply add your Zcash wallet to the wallet section by adding ‘-zwal YOUR_WALLET_ADDRESS’.

Experimentation with various GPU selections in the calculator will reveal a card with the best price-to-performance-to-power consumption combination (expressed as MH/s per currency unit). Keep in mind that AMD cards outperform Nvidia cards for Ethereum mining purposes on the EthashAlgo, but AMD doesn’t beat Nvidia when it comes to the Equihash algorithm using the EWBF Miner.

Zcashcommunity.com is your source for the latest news and information about Zcash. This Site and the Chat at chat.zcashcommunity.com are public resources for the Zcash community and are not owned or maintained by Zcash Electric Coin Company. If you would like to support this work you can donate HERE

AsicMiner Market team has been building and selling mining rigs, creating custom firmware for ASIC miners (padrino Jupiter firmware, padrino Titan firmware), and consulting on large GPU and ASIC deployments since 2011, when Bitcoin was just starting to gain popularity. We will be around for the future and are happy to help with projects of any size.

Your first step will be to choose a Zcash mining pool. There are plenty to choose from, but we recommend Flypool. The home page or help section of a mining pool site will likely contain instructions on how to mine on its pool using the popular EWBF Miner.

Hi.. friends, How are you? i am jeny From London, am here to provide you free guide about Cryptocurrency. just visit my website cryptolegit.com & get expert beginner to advanced Guide About Cryptocurrency. Please feel free put your question, so we both make this platform more useful. if you wanna write guest post on cryptolegit.com with one Do follow attribute then also mail me your article. your article should be 100% unique, natural, no rewrite/spin & related to Cryptocurrency with minimum 500 Words. Thanks

If you have a Linux CUDA compute machine available we highly recommend using nvidia-docker. Installing different CUDA versions for Zcash mining and deep learning frameworks and managing versions can be painful. Using nvidia-docker you do not have to worry about that.

The EWBF CUDA Zcash Miner has a built-in developer fee that is set at 2%, meaning that every 10 minutes the software will switch to a different pool and mine for the developer some shares and then get back to mining for you. The author of the software claims speeds of about 250 H/s for Nvidia GTX 1070 while the NiceHash EQM miner does currently about 220 H/s on the same GPU. Our quick tests showed a hashrate of about 235-240 H/s average (up to 250 H/s) on stock GTX 1070, so still slightly faster, but not as much as you may want it to… then there is the dev fee as well and it seems that we are seeing somewhat more rejects than, especially when switching to mine for the dev fee. So while this may be an interesting alternative for users willing to mine outside of NiceHash, the actual performance that you may get poolside may not be much different than with what is currently the fastest implementation from NiceHash (taking into account the dev fee and the rejected shares)…

Notice I only have one GPU running. If you have multiple GPUs they all should be displayed as separate line entries starting with 0. At the top we can verify the mining program and version, the server, solver we are using (in this case the default or auto selected), devices configured for mining (more for multiple GPU systems, in our example just one even though it says all), max temperature limit of 90 degrees C (default setting) after which point the mining software will shutdown to prevent GPU damage, and information on if the optional API is enabled or disabled, as in our case.

Private Key   This is the part of data that you keep secret in your Bitcoin wallet. Every Bitcoin address has a unique private key attached. Possession of this key is what allows you to maintain control of those bitcoins. If someone else is able to obtain your key, they also have control of your bitcoins.

Simply plug in Freedom Miner to any 110-240V power outlet, plug in the Ethernet connection to your router or cable modem, turn it on and it will begin mining right away. A typical 15A circuit can support two Freedom Miners (7.25A / Unit), assuming no other equipment is being powered at the same time.

To minimize the disruptions to your mining and settings, you may also want to disable Windows Updates. If you feel more secure leaving updates on, you can do so, but keep in mind there are frequent updates that will reboot your system and stop your mining.

“icus +high yield investments”

Hi Marilyn, Imgur.com is a good site for image uploads, just as a tip. The Mega page won’t load for me for some reason, probably due to my browser config. Google Drive works though. The one you want to download is Zec miner 0.3.4b – or whatever the latest working version mentioned on the forum page happens to be. I’m not really understanding the problem. Sounds like you downloaded the miner OK, just it’s named differently? That won’t be an issue. I suggest you run some virus scans on the miner you downloaded and then proceed with the rest of… Read more »

I started with EBWF then I discovered DSTM which was the tits with the higher hashrate but it was fairly unstable if I tried to adjust the vid cards through MSI AB giving me hard freezes or bsods. Sometimes they happened a short while after I walked away after adjusting a setting to give it time to settle. Sometimes hours later.

Learn more about EWBF’s Cuda Zcash Miner  – We’ve only exposed you to a few of the settings that are available for use when mining. In the folder with the miner in it, open the HELP.txt file to review all available settings.

Zcash, a privacy centered cryptocurrency, made a mark in the mining scene by use of its ‘Equihash’ Proof of Work mining algorithm. The algorithm distinguishes itself from others with its focus on memory. In short, to mine Zcash, you’ll likely need more memory than what you’d need for other cryptocurrencies. But don’t worry, Zcash’s whopping $350+ USD trading value gives you enough incentive to get started.

If you have a Linux compute machine available we highly recommend using nvidia-docker. Installing different CUDA versions for Zcash mining and deep learning frameworks and managing versions can be painful. Using nvidia-docker you do not have to worry about that.

Aujourd’hui, les monnaies qui utilisent equihash sont : Zcash, Zclassic, ZenCash, Hush, BitcoinZ et plus récemment, Bitcoin Gold (j’ai fais un article sur BTG en anglais que vous pouvez aller voir en cliquant ici)

Configure the mining software (usually via batch file) to point to your desired pool and mine to your wallet address, as well as any GPU specific options you may need (or want) to enable (if supported).

Another cloud mining service provider that has been available for quite some time already as well – HashFlare has also announced their plans for offering cloud mining hashrate for Zcash (ZEC). They have already started the presale of mining contracts with a price of 4.20 USD per 0.1 H/s with the launch of mining planned to start before 21.11.16, so you will be able to catch some of the slow start mining period as well. Each of their Zcash cloud mining contracts will last for 1 year (from activation) and will not have any additional fees as everything is apparently included in the price.

Now with all that said, it also does not mean that a mining program cannot contain a virus, or that it isn’t a virus itself, so don’t just blindly trust it either. It is just that there is a valid reason for a high rate of false positives when it comes to such software. Just as a general rule, I would not load any mining software on a machine that contains a cryptocurrency wallet, or one that you do any type of financial work on. It is best to play it safe and keep your mining rigs separate from your important information, so a separate machine is best that is dedicated to mining if possible.

I really like using EthOS over simple mining cause you can actually somewhat use LXDE as an operating system. The problem with EthOS is the limited number of mining programs you can run and the limited amount of packages you can install (instead of apt-get you have to use apt-get-ubuntu and about 90% of packages won’t download or install, and if they do you might have broken EthOS.)

Running 1 Asus Nvidia 1080Ti on Linux mint using 390 driver , EWBF Cuda miner CLI in minergate pool. OC 202203 64-128 mem no power limit full speed fan. 60 degrees C. 769 – 775 Sol/s on Bitcoin Gold y0utub3 vid search –>> “foebage 1080ti”

Today we are going to show you how to mine Zcash with your CPU and GPU on Windows. We are going to use two miners (Software) for each type of hardware: Nicehash miner for CPU and the claymore miner for GPU. 

Click on “workers” and choose one of the jobs (Account’s default jobs) according to your card. Run the file you have created (mine.bat). Make sure that there are no errors and that a message approving your worker has been received. If you did not get this message, it means you did something wrong. After the program starts running you will see that the worker (called the miner) is added to the “workers” screen. On the site, click “Dashboard” to see data about the mining (it will take some time until you see something; it is updated according to the work that the mining machine does).

It does mine but there is no way to get paid and you need to put your wallet address in some other website,the app crashes and suddenly stops constantly, it needs an update to fix all those software errors,is really bad design it should pay immediately after is done hashing and it should have a place to put your wallet so it sends the coins to the wallet directly and have no issues, very hard to get support, it seems to be working and hashing but just can’t get it to pay or no support, i don’t recommend it seems like a gimmicky lie

For a solid budget card, the Nvidia 1060 with 6 GB of RAM is recommended (when in stock and not ridiculously overpriced due to the card shortages we’ve been seeing in summer 2017). This GPU will beat the AMD 480s when it comes to mining Zcash!

ccminer download Innosilicon A2 automated trading backtesting engine pbmining profitability Mintpal x11evo GPU miner Bytecoin VNL ccminer E-Coin E-Card OKCash Sia stratum AMHash hashrate transfer crypto market cap DragonMint B52 NiceHash Ethereum A2Mini ZenController Bitcoin deposits with interest RX 470 Giga Watt Barry Silbert GroestlCoin info Sexcoin trading Decred pool FSC prepaid crypto card try Steemit trading charts BunnyCoin exchange Etherapps AMD Blockchain Compute NewYorkCoin NiceHash profit switching Scrypt ASIC comparison cpuminer-opt 3.3.8 Litecoins digitalBTC heavycoing gpu miner DBL pool Gridcoin State of Bitcoin 2014 CryptoNote bug disable wallet transaction broadcast ccminer alexis78 Siacoin Mining Calculator Monacoin exchanges Krugercoin trading DAO hard-fork BITZ pools CPU crypto mining ETH for Gold The Age of Cryptocurrency NiceHash Miner SIB gridcash Ethereum mining rig PascalCoin stratum how to compile cudaminer fake extortion BBQcoin BM1385 X11 CPU miner XVC solo mining proxy Luckycoin scrypt crypto POT NMC trading

Linux users would probably want to go and try the  latest version of the Silentarmy miner that also brought support for Nvidia GPUs and is apparently providing similar performance as the NiceHash release for Windows. Also the Silentarmy miner is doing pretty well on AMD hardware, so do try it as well if you have such mining rigs and are running them on Linux.

Once your Trezor is setup, then the Trezor web wallet will display a list of addresses under the Receive tab (if I remember the tab’s name correctly, it’s something like “Receive”). Just select any address listed there and plug it into your mining pool / software as your payout address.

A: You can run the miner like all previous versions with command line arguments, in this case the config file will be ignored. If you sets the –config argument, the specified config file will be used, all other command line arguments will be ignored. If you run a miner without command line arguments, the miner will try to use the default config file miner.cfg.

Block   A block is a unit of the code the comprises the bockchain. It is the record of transactions that have occurred since the last block was created and a confirmation to previous transactions. Each block links to the block before it, thus creating a full chain back to the original or “genesis” block.

By default the EWBF miner should extract to a folder named “Zec miner 0.3.3b” unless you changed it. I would recommend placing this folder somewhere easy to get to, such as the root of your C drive, your Desktop, or somewhere you can easily locate it. For this guide I extracted it to: “C:\Zec miner 0.3.3b“. Open up the Zec miner 0.3.3b folder and you should see files similar those those below:

The miner still needs some work, especially on Nvidia GPUs where by default it is pretty heavy on the CPU load and memory usage as well. It is recommended that Nvidia users add the parameter –enable-nv-hotfix in order to reduce the CPU load a bit, but still running the miner on the main GPU may make the system a bit unresponsive even with that parameter. Still if you are interested in mining MNX (even with the high hashrate and low block reward at the moment) or any other Equihash 96/5 coin you might want to check the lolMiner-mnx out.

Below is an example of a batch file that we use on one of our Windows-based mining rigs. Everything is contained in a single line in the .bat file. That single line specifies the program to be run (miner) and a few settings that customize the miner’s activity. Finally, and most importantly, one of Zcash wallet addresses is specified so mined Zcash goes to the right place. Here’s the .bat file that we are currently using to start mining. Scroll to see all of it’s contents if necessary.

Using the exact same stable msi AB settings I dialed in with DSTM, I tried it out for 24 hours and didn’t get a single crash and rejected shares were single digits out of almost 3k shares submitted and my overall hashrate went up +60 sol/s. I’ve also noticed it doesn’t mind when I’m tuning the graphics cards while active and have never gotten a bsod or frozen pc in days now. Cherry on top is that I personally like the telemetry screen which is a bit nicer to monitor over dstm’s. Devfee is the standard 2% same as all the others.

For those with inexpensive power, this is not an issue. For those with expensive power, it can be the largest recurring cost for Zcash mining. Using our power consumption and hash rate data, here is what profit per day looks like with $0.10/ kWh, $0.20/ kWh and $0.40/ kWh power:

Digital currencies are mine to a transparent address but it can be spent to shielded address or Z-address. This currency should be swept out of the transparent address in one transaction without any changes.  You should use the Z-sendmany command to send currencies from a transparent address to shielded address. You need 4GB RAM for this process.

Currently the NiceHash EQM Zcash miner is the fastest ZEC miner out there for Nvidia GPUs with the latest release bringing up to almost 50% increase in performance for most Nvidia GPUs. Everything would have been perfect if you could use the miner for other Zcash pools, but the EQM miner is still only supporting the NiceHash service, so you cannot mine ZEC with it, just sell your Zcash hashrate and get paid for it in Bitcoin. The recently released EWBF CUDA Zcash Miner is probably the fastest ZEC miner for Nvidia GPUs that is available for Windows that you can use on other pools for mining Zcash directly, though it is slower than the latest EQM miner release and that one also comes with 2% dev fee (no fee on the NiceHash miner, but only locked to their service).

Hash (Rate)   A hash is the output of a hash function and, as it relates to Bitcoin, the Hash Rate is the speed at which a compute is completing an operation in the Bitcoin code. A higher hash rate is better when mining as it increases your opportunity of finding the next block and receiving the reward.

The good news is that getting started with Zcash mining is very simple. You don’t need to download the full Zcash blockchain or manage clunky command-line miners with manual instructions; you can mine directly to an exchange or to a hardware wallet such as Trezor or Ledger Nano S. Of course, you should always do your due diligence to ensure your coins will be properly supported before sending them anywhere.

“lisk |freebitco in hack”

Run with ‘-h’ parameter to learn possible commands. By default, miner uses all CPU cores and no CUDA devices. You need to explicitly enable CUDA devices (setting ‘-cd’ parameter). If you wish to mine only with CUDA and no CPU, set ‘-t 0’.

Pour overclocker votre carte, il vous faut tout d’abord un système de refroidissement efficace. En effet, la carte graphique va chauffer bien plus que dans une utilisation normale. Ensuite, téléchargez un logiciel d’overclocking avancé comme MSI Afterburner. Une fois sur afterburner, vous allez augmenter au maximum la Power Limit ainsi que Temp. Limit. Cette opération est sans aucun risque. (Nous n’allons pas toucher à l’overvoltage pour éviter que le GPU devienne instable.) Ensuite, augmentez petit à petit le Memory clock (c’est le plus important pour equihash) Normalement, vous pouvez augmenter sur plusieurs centaines de MHz (jusqu’à 400 MHz sur 1070 avant instabilité.) Si vous voyez apparaitre des barres au milieu de l’écran, votre carte devient instable. Redémarrez votre PC et refaites la manip jusqu’à la limite avant que la carte devienne instable. Ensuite augmentez un petit peu le Core clock (moins important mais il vous fera gagner quelques sol/s en plus) jusqu’à que votre carte devienne instable. Une fois les limites définies, laissez les paramètres et observez votre hashrate augmenter.

From a security minded engineer: How can I trust someone sharing Windows executable via Google Drive and using WinRar? The guide is nice but it raises lots of security concerns. There’s no auditable open source code and stamp by security experts. Not long ago we had WannaCry spreading in the wild.

All of these calculations can change based on mining difficulty as well as Zcash price fluctuations. Here is a view of what 1 December 2016 to 20 May 2017 Zcash pricing looks like via Poloniex (one of the larger exchanges):

Replace “eu” for your mining pool address found on the pool “Get Started” page, “ZEC-ADDRESS” for your zcash wallet address (transparent address) and lastly replace “-t 8” for the number of threads you want to use. (If you’re using the Nicehash pool, you can use -l to specify your location like “eu” for Europe)

Zcash Mining Guide for Beginners, Zcash has become very popular term and people want to know more about it. This is a Cryptocurrency that generally uses zk-snarks.  This anonymous digital currency ensures that all the transaction information is safe and safely encrypted.

First, head over to whattomine.com, which provides up-to-date figures for current prices, block times, and network hashrates (as measured in megahashes per second, or MH/s, denoting millions of calculations per second).

Could u please run another test. Set your cpu-governor to performance mode this time. The miner is highly multithreaded. Since it scales so bad compared to a 1070 – it could be due to scheduling latencies. So if u have some time pls test with cpu-scaling governor set to performance.

If you are new in crypto like me and don’t know where to start or what to do, check this article, it helped me find the good exchanges, save a lot in commission fees and showed me how to earn free coins (not many but a little of different coins, who knows, maybe one day they will be worth a lot) :

Zcash offers total payment confidentiality, while still maintaining a decentralized network using a public blockchain. Unlike Bitcoin, Zcash’s private transactions hide the sender, recipient, and value of transactions on the blockchain. Only those with the correct view key can see the contents. Users have complete control and can opt-in to provide others with their view key at their discretion.

The world of cryptocurrencies is growing at an accelerated pace. The crypto market cap continues to grow with record breaking volumes. The basis for creating value in the crypto world is the mining process for major and veteran coins – with Bitcoin leading them.

So get mining, folks! And for the less knowledgable I can warmly recommend cloud mining. But make sure you choose a reputable one that has been around a while. I just chose Genesis Mining based on research and they got good discounts every now and then, like right now there is a coupon code you can grab: 809fKo

Some settings should be modified in Windows to get you ready for mining.  First, you don’t want your computer to go into Sleep mode, as it will interrupt your mining. Go to your Power Settings and set Turn Off/Sleep to Never.

Building a large ZEC position through mining now may allow you to take advantage of price appreciation in the future with less risk than you’d face by just buying ZEC. Let’s break this idea down a bit further.

Replace “eu” for your location, “ZEC-ADDRESS” for your zcash wallet address (transparent address), replace “-t 8” for the number of threads you want to use, and lastly replace “-og 0” for the number of GPUs you’re using (as in -og 0 1 2 if you’re using 3 GPUs)

Once you have these downloaded open up Linux Live, select your usb you want to use and select the Ubuntu 14.04 iso you just downloaded. Then press the lightning button. Once it is done reboot your PC, and boot into the BIOS. You can usually do this by pressing F2 or F12 when the computer is booting up. you are here select ‘Boot Menu’ and select your USB drive. From here it is pretty self explanatory.

In 2009, Bitcoin was one of the first applications of the blockchain. Since the invention of money, the problem of centralization has always existed. Although it was temporarily solved in the era of the gold rush, when every ordinary man could mine gold and generate money, since then, banks and credit companies took control over the money, shifted over to working with credit, and practically cut off the connection to gold itself and created a monopoly on printing money. Bitcoin returned the possibility of generating money for everyone. It is no coincidence that the process of generating cryptocurrencies is called “Mining”.

6. If you notice there are some loose heatsinks when you receive the miner, please inform us by email to sales@asicminermarket.com within 3 days from the date the package is received according to UPS/DHL/FEDEX website.

The GeForce® GTX 1080 Ti is NVIDIA’s new flagship gaming GPU, based on the NVIDIA Pascal™ architecture. The latest addition to the ultimate gaming platform, this card is packed with extreme gaming horsepower, next-gen 11 Gbps GDDR5X memory, and a massive 11 GB frame buffer.

Maintenant, il ne vous reste plus qu’à créer un wallet et à se connecter au pool. Pour cela, allez dans le dossier de EWBF puis faites un clic droit sur start.bat (pour Windows) cliquez sur modifier et rentrez les paramètres suivants s’ils n’ont pas été rentrés par votre pool : –server « votre pool » –port « port du pool » –user « votre wallet ». « Votre nom de worker » –pass « mot de passe du pool (souvent vide) » –pec (afficher la consommation) –fee « mettez 0 si vous ne voulez pas avoir de frais des développeurs de EWBF (à 2% de base) »

For me, i’ll select the US server as shown. Make sure to also include the port number. In the config.txt, I will insert ‘-zpool us1-zcash.flypool.org:3333’. Simply add your Zcash wallet to the wallet section by adding ‘-zwal YOUR_WALLET_ADDRESS’.

Zcash also differs because it has a built-in privacy protocol called zk-SNARKS, which is designed to make it the leading privacy-based crypto in the market (competing with other privacy coins such as Dash and Monero).

If you’re reading the newbie’s guide to Ethereum mining and have a GPU that’s powerful enough to make it worthwhile, we’re going to assume you’re running Windows, so we’ll focus on mining Zcash on that platform.

Important: You will need to already have Zcash installed before you can start using the more specialized software below! If you want a beginners step-by-step guide to installing and using the software for you can find one here and I have embedded the official install video below.

–server us1-zcash.flypool.org  (the — indicates a parameter with a valid keyword will follow, in this case server. Then a space and the variable for the parameter, in this case the flypool server address.)

Hi.. friends, How are you? i am jeny From London, am here to provide you free guide about Cryptocurrency. just visit my website cryptolegit.com & get expert beginner to advanced Guide About Cryptocurrency. Please feel free put your question, so we both make this platform more useful. if you wanna write guest post on cryptolegit.com with one Do follow attribute then also mail me your article. your article should be 100% unique, natural, no rewrite/spin & related to Cryptocurrency with minimum 500 Words. Thanks

You need to take in to consideration the system which requires another 100w. 1080 with 80 percent power and 2 1060 also at 80 percent power should be fine. If it doesn’t work try to reduce power further to 75 percent. I have my 1080s set to 70 percent power.

Equihash Titan X Bitmain AntMiner U1 Cryptotrader Decred staking Heavycoin trading Simple Trade Bot review KeccakC Nvidia Innosilicon Scrypt ASIC new launches CMC crypto coin Scrypt cloud mining hashrate Raspberry Pi mining controller crypto token Neoscrypt hashrate rent artificial intelligence 250 MHS Litecoin ASIC Noirbits info Americancoin exchanges sgminer luffa512 windows Poloniex coin list COAL MSI GTX 960 specifications ICO announcement threads Oh Crop KnCMiner Neptune SegWit support BW-L21 ASIC ZEC Nvidia sph-sgminer Fresh LegendaryCoin trading sgminer fork hmq1725 MEC pool Multipool DOGE GTX 1070 ETH mining DVC asic ChangeTip Scan Bitcoin limits X14 rent Blake miner excavator NVIDIA miner Bitcoin Billionaire iPad game VRC trading Antminer R4 ASIC 300 MHS Litecoin ASIC A2 miner review RIC SiaCoin ccminer TEK mining YAC alt crypto AMD mining GPU Novacoin exchanges Viper ASIC chip HBN info Gigabyte Windforce failed fans EAC pool RX Vega 56 miner XMOS mining MediterraneanCoin alt crypto Neoscoin info cgminer 3.8.5 antminer keccak nvidia miner TDP increase Bitcoin problem

Starting with Genesis Mining who have once more upgraded the Zcash cloud mining hashrate for their existing customers by another 25%. This means that everyone that has already purchased Zcash cloud mining hashrate from them got a nice boost in performance and amount of mined ZEC for free. Furthermore, new customers purchasing Zcash cloud mining hashrate will also get a boost in the hashrate they purchase, however the mining for new contracts purchased at the moment will start on December 1st and not immediately, so pretty much after the slow start for the mining ends.

–pass z  (the actual value of this parameter is usually ignored by pools but oftentimes required by either the pool, mining program, or both. Can be set to something like “X” or “Z” unless your pool requires a specific password).

You should also go through the various guides that help learn how to install any of them wallet.  You can also use an exchange as a wallet but this is not recommended. Once you have your pool and wallet ready, you can start process of Zcash mining.

Now me personally I am a little superstittious when it comes to running things and I for some reason like to run my mining programs a super user. This will be a little redundant, but this is just how I do it.

“best money investment _zcash”

Now me personally I am a little superstittious when it comes to running things and I for some reason like to run my mining programs a super user. This will be a little redundant, but this is just how I do it.

Learn more about EWBF’s Cuda Zcash Miner  – We’ve only exposed you to a few of the settings that are available for use when mining. In the folder with the miner in it, open the HELP.txt file to review all available settings.

On the GPU side, we are going to use the Claymore miner. Claymore has a long-standing reputation for optimizing miners and this miner speaks for it. It improves the hashing rate considerably and that is why we are going to take the time to download and use this miner as well. The genoil miner only works for pool mining and with AMD graphic cards. This miner charges a 2.5% developer fee. Every hour the miner mines for the developer during 90 seconds. However, the performance increase is well worth the fee charged. If you don’t agree with the dev feem, don’t use this miner

Using the exact same stable msi AB settings I dialed in DSTM, I tried it out for 24 hours and didn’t get a single crash and rejected shares were single digits out of almost 3k shares submitted and my overall hashrate went up +60 sol/s. I’ve also noticed it doesn’t mind when I’m tuning the graphics cards while active and have never gotten a bsod or frozen pc in days now. Cherry on top is that I personally like the telemetry screen which is a bit nicer to monitor over dstm’s. Devfee is the standard 2% same as all the others.

The EWBF Zcash Cuda Miner is written primarily for Nvidia cards running under Windows, and in its description the developer indicates that it is: “Written for Pascal GPUs but works on cards with at least 1Gb memory, and Compute Capability 2 and higher.”

Well you need to do your own due diligence, but if you click on the link originating from the Bitcointalk EWBF support thread you should be taken to the authors downloads, which many users have reported as safe.

The AM200 Ethereum Miner has been in development for a number of months with the goal of delivering a high quality solution suitable for almost any environment. Proper cooling, and web based management of the miner provide for ease of use not seen with many Ethereum Miners to date,

Routinely during its operation the miner will also display useful information such as the GPU temperature(s), sol/s per card and total sol/s. The part highlighted in a table fashion is what was enabled by using the –pec flag above and displays a rough efficiency reading you can later use to help fine tune your settings.

If you are a beginner you should know how to install and use this software. This software takes benefit of your CPU to mine. You can also build a dedicated GPU rig for mining the basic software but this is not sufficient. You should decide on software that optimizes to take profit of your GPU.

Yuval has been on several customer facing and management positions in software companies and projects. An industrial engineer with a passion for business, technology, and innovation. Loves to create while having fun!

Several months ago, we tried Zcash mining in Docker and even published Docker containers for CPU mining. Although we have CUDA enabled Monero mining containers, they performed well, but not significantly better than CPU mining. When we built a new image with Pascal GPUs we found that NVIDIA GPUs can keep up profitability in-line with using AMD GPUs to mine Zcash or Monero.

Their prices are now a bit higher than the above alternative since the latest announcement of hashrate upgrade, but there is an active promotional code for them as well that is following a recent Halloween promotion going for all knids of cloud mining hashrate being offered. You can use the promo code HF16HLLWN10 to get a 10% discount from the regular price of $4.20 USD per 0.1 H/s for the EQUIHASH cloud mining hashrate being offered at the moment. Do note however that this discount code will be valid only until 06.11.2016 23:59 (UTC +0) when the promotional offer will expire.

For me, i’ll select the US server as shown. Make sure to also include the port number. In the config.txt, I will insert ‘-zpool us1-zcash.flypool.org:3333’. Simply add your Zcash wallet to the wallet section by adding ‘-zwal YOUR_WALLET_ADDRESS’.

We all love getting consistent feedback for our work. After all, there’s nothing more frustrating than mining into the void. That’s why mining pools are so popular for miners nowadays. Instead of waiting to receive rewards on your own (which takes very long because of how unlikely it is), just join a pool to receive a fair proportion in the worth of your hash contribution to the network. Mining pools break up the rewards proportionally between all participants, which is why it’s the preferred way to mine for most lower-hash miners.

I really like using EthOS over simple mining cause you can actually somewhat use LXDE as an operating system. The problem with EthOS is the limited number of mining programs you can run and the limited amount of packages you can install (instead of apt-get you have to use apt-get-ubuntu and about 90% of packages won’t download or install, and if they do you might have broken EthOS.)

Not everyone has the proper knowledge, time and patience to start Zcash mining on their own but still you can go for Zcash mining using your own computer.  If you have already decided to mine Zcash, you should know what hardware you need to use. First of all you go for right hardware, then software. There are so many software types available in market that works with various different hardware configurations.

“portfolio investment investment ideas”

Here you can find the submissions to the challenge, along with link to the code hosted on GitHub. Not all submissions received are listed here. If a submission does not appear to include any Equihash code, then it is not published here and was not considered for judgment unless there was code added before the deadline. Submissions are listed in no particular order.

Zcash is a fork of Bitcoin protocol, a currency that brings some major privacy improvements to its clients. A unique zero-knowledge proving technology makes it possible to shield some transaction details from prying eyes, like the sender, receiver and transaction amount. The currency has a strong developers and investors team. 10% of all Zcash tokens to ever be mined are allocated for the employees and shareholders, which is a strong stimulus for them to take good care of the network and ensure its further development and propagation.

ZCash is an anonymous cryptocurrency that uses zk-snarks to ensure that all the information regarding user transactions is safely encrypted, while still verifiable by miners that can ensure no double-spending has taken place using zero knowledge proofs.

**link removed** As per your instructions (both on the printed and video instructions) when I went to “mega” (see above) and clicked, it brought me a list of about 15 items, each item that said “Zec Miner” with different dates on it. (I have a screen shot of the list but no where to upload it.) I picked the most recent date, which was the last item on the list, When I unpacked it to my desktop it still said “Zec Miner.” I went back an did a search for “EWBF ZEc Miner” on that same forum page with no… Read more »

Editor’s Note: We ran this analysis on 20 May 2017 when Zcash’s coin ZEC was $104 USD to 1 ZEC. By the early morning Pacific time of 22 May 2017 that had hit $124. As this is about to publish it is currently at $248 USD to 1 ZEC. These markets fluctuate greatly.

Using this miner is easy but you have to specify the number of cores you have for better performance.  You should check your CPU count by opening task manager.  The nicehash miner has 2 versions and comes with it. One version is to get paid in BT C and another in Zcash. Now open the nheqminer_zcash” file now you can start mining with CPU and paste the command given below:

Today we are going to show you how to mine Zcash with your CPU and GPU on Windows. We are going to use two miners (Software) for each type of hardware: Nicehash miner for CPU and the claymore miner for GPU. 

Alternate Currencies   There are many different alternative currency that have sprung up based off of the idea and/or basic code of Bitcoin. A few of the more notable ones are litecoin, namecoin, PPCoin, and Ripple. To learn more about these, please visit our alternate currencies page.

The whole process of getting set up, downloading your miner, configuring Windows, and setting up your batch file to run should take less than 20 minutes. Follow along with the steps in the video guide below, or read on for a full text guide.

In this post I’ll break down the various steps required to mine the eagerly anticipated Zcash which is due to be released on the 28/10/16. In advance of the launch day we can prepare our machines to be ready right from the very start.

The official Zcash 1.0 User guide at https://github.com/zcash/zcash/wiki/1.0-User-Guide is a great place to start and just get familiar with how Zcash works. Zcash software provided by Zcash company is a complete package that will let you run a full Node, Mine with your CPU, and also has a built in Wallet for sending and receiving Zcash.

Equihash est un algorithme de hash spécifique qui a été créé par les créateurs de Zcash. Une de ses particularités est que cet algorithme demande une très grosse quantité de mémoire vive (RAM) et une grosse bande passante à cette mémoire pour que le mining soit profitable. Ainsi la production d’ASIC est à ce jour impossible et seules les cartes graphiques peuvent réellement le miner. (Il est également possible de miner equihash avec son CPU mais cela n’est vraiment pas rentable et il y a plus de perte en énergie que de gains.)

I would recommend EWBF miner for Zcash, but Claymore dual mining is just as good. Just in case anyone doesn’t know you can dual mine any coin you want, your not limited to just ETH and Decred or ETH and SIA. Just need to read the “Read Me” Text doc in your miners folder. I made a short explanation video, mind you I am not a top end Content creator… but should help..

“investment tips |aim investments”

Mining and holding crypto is similar to the old adage of buying low and selling high, except for the fact that most buyers don’t know how to do technical analysis, so they buy and sell at the wrong times. They buy high during parabolic price increases and sell low during what could be normal price corrections on continued upward trends.

Hey Charlie, OK, I expect you’re checking that out on the South African Bitmart.co.za site which sells miners and other crypto gear? It’s their name for 6x 1080 GPUs in a re-assembled rig… So sure, it’ll be good mining zCash, as that’s its intended purpose after all and the 1080 GPU is a good miner. That said, electricity in SA has become pretty expensive and Bitmart’s prices are fairly steep. Their setup goes for R88k but I see that a single GT 1080 (basic model, not the Ti) goes for about R10k on Evetech: https://www.evetech.co.za/PC-Components/buy-nvidia-geforce-gtx-graphics-cards-47.aspx You should check which… Read more »

I briefly mentioned it while reviewing the EVGA GTX1080 card, but I thought I would take some time to go over EWBF’s Zcash Cuda Miner in more detail and help anyone unfamiliar with the program or mining in general to get setup and running quickly with it under Windows.

You will also need a mining pool to direct your hashing power to. You can compare features and reviews on multiple Zcash pools here. We are going to choose nicehash pool for this guide, but it will work with any poo

Tags: Equihash, Equihash miner, Equihash mining, Genesis Mining, Genesis Mining Zcash, Genesis Mining ZEC, nheqminer, Zcash, Zcash cloud mining, Zcash CPU miner, Zcash crypto, Zcash details, Zcash GPU miner, Zcash miner, Zcash mining, Zcash specifications, ZEC, ZEC cloud mining, ZEC CPU miner, ZEC crypto, ZEC details, ZEC GPU miner, ZEC miner, ZEC mining, ZEC specifications, ZECMiner

There are many risks when it comes to Zcash mining on your NVIDIA Pascal desktop GPU. First, Zcash pricing can be unpredictable. We have seen major drops in value before (depicted above.) One also needs to be able to convert Zcash to standard currency which may incur transaction fees and/ or be difficult.

The issue is that ewbf is not the fastest miner availible so it should be compared to dtsm´s miner and the increases are not that significant. But the 1080 boost seems nice, i will test it on my rigs.

I use the MSI GTX 1080 TI AERO. These cards are the best in performance and cooling. They have from to back airflow that keep these cards cooler than most. Note: Do not buy the Gigabyte version of these. They have firmware issues and crash.

Not everyone has access to a computer, however, and not everyone has the time, knowledge or patience to start mining Zcash on their own, especially since there is no Graphic User Interface (GUI) Miner available yet. If you want to mine on your own computer, but need a little push to do so, you’re in the right place. But if you’re looking to profit from Zcash mining with no effort at all, this guide will do the trick.

–server us1-zcash.flypool.org  (the — indicates a parameter with a valid keyword will follow, in this case server. Then a space and the variable for the parameter, in this case the flypool server address.)

To see all the directories in your current location type ‘ls’. I personally like to change the name of my zcash directory in the home folder to ‘zcash’ just so it’s shorter. You can do this by selecting the directory you want to rename and pressing ‘F2’. Now we will need to change directories to the zcash directory. So type in the terminal

I think I’m ready to start building a rig operating system from a stock OS. I’ll be using lubuntu (my pers fav). MIning rigs make the best home computers I have my smallest rig ( 5 x 1070 Founder edition) in my living room. I hope I get everything running smoothly so I can go ham on packages and running nodes.

It does mine but there is no way to get paid and you need to put your wallet address in some other website,the app crashes and suddenly stops constantly, it needs an update to fix all those software errors,is really bad design it should pay immediately after is done hashing and it should have a place to put your wallet so it sends the coins to the wallet directly and have no issues, very hard to get support, it seems to be working and hashing but just can’t get it to pay or no support, i don’t recommend it seems like a gimmicky lie

2. All sales are final. No refunds will be granted. Defective miners can be repaired for free if they fall under the Asic Miner Market  warranty policy. After the warranty period, machines can be repaired at the cost of parts and labor.

I don’t fully understand your question. Only the machine running the zcash4win program will do that actual mining, using its system resources. However, you can have a Zcash wallet on any machine and the mining rewards can be sent to that wallet. So you can have one machine doing the work of mining and any other machine to receive the Zcash which is mined. Hope that helps.

You mention Linux, my only question is… are you gaming on Linux as well, or just dual booting? I know there isn’t an nvidia-docker for Windows, so I was wondering the easiest/quickest way to start up a zcash instance on the side.

The other thing is wallet that you need to complete the mining process. You require a wallet to receive, send and store your funds.  There are multiple GPU wallets available and you can choose the right one. You can compare the features and reviews.

It can also help to check your equipment on different mining profitability websites. Sometimes the estimations vary so you can get a more accurate prediction by trying out different calculators. Some worth mentioning are:

If you have a Linux CUDA compute machine available we highly recommend using nvidia-docker. Installing different CUDA versions for Zcash mining and deep learning frameworks and managing versions can be painful. Using nvidia-docker you do not have to worry about that.

“ethereum network -airdrop”

so it’s latency dependent. I’m not sure how much time u have. If u have some, I would compile some versions that should show where the bottleneck is. Also could u pls check the cpu usage. If u have some time for all this stuff ofc.

* The nheqminer is available with hardcoded pools from nicehash, suprnova and other mining pools supporting Zcash, so make sure you download the correct version for the pool you are going to be mining at.

You mention Linux, my only question is… are you gaming on Linux as well, or just dual booting? I know there isn’t an nvidia-docker for Windows, so I was wondering the easiest/quickest way to start up a zcash instance on the side.

AsicMiner Market team has been building and selling mining rigs, creating custom firmware for ASIC miners (padrino Jupiter firmware, padrino Titan firmware), and consulting on large GPU and ASIC deployments since 2011, when Bitcoin was just starting to gain popularity. We will be around for the future and are happy to help with projects of any size.

Linux users would probably want to go and try the  latest version of the Silentarmy miner that also brought support for Nvidia GPUs and is apparently providing similar performance as the NiceHash release for Windows. Also the Silentarmy miner is doing pretty well on AMD hardware, so do try it as well if you have such mining rigs and are running them on Linux.

The latest NiceHash EQM Zcash 1.0.3a is available for both Windows and Linux and promises up to 320 Sol/s on a stock GTX 1070, and up to 370 Sol/s on overclocked GTX 1070 (you need to use two instances per GPU for maximum performance). We can confirms hashrates that are very close to the ones claimed on the GTX 1070 and of course the miner also does well on other NVidia GPUs. Do note however that it does require SM 5.0 GPU, meaning Maxwell or Pascal as it will not work on older Nvidia architectures…

Could someone help me out here. I’ve got a R280X that should run around 290 h/s on equihash. I runs great guns on Cryptonite 485 h/s but when I start Claymore Zen64 miner it starts out at 275 h/s and then starts to throttle back to 150 h/s. It drops my clock speed in half and I have control over setting thru MSI afterburner. It mines along but at half the speed 500mhz.

Run and verify that the software is mining correctly. After several minutes check your pool for statistics (should see some shares appearing), and after minimum payout level is reached (could be days with one or two cards) check your wallet or exchange to confirm payment was sent by the pool and properly received.

Since cryptocurrencies have risen exponentially in the past few months people want in. One of the best ways to make money with currencies like Ethereum and Bitcoin is to ‘mine’ them. When you mine a cryptocurrency you are running a program on your computer to use your computers computing power on the network. Whenever your computer solves a piece of the puzzle, a block in the blockchain, your miner is rewarded. There are two main ways to mine:

Install your GPU drivers as you normally would and reboot. You’ll know your GPU has been recognized correctly if you go to Device Manager (search it in Windows search bar) and you don’t see any warning marks on your GPUs. They should look like this:

ccminer lyra2re download MtGox gone hodlminer source LTC halving 5-chip Dual Miner litecoin gpu miner GAW Qubit ASIC Compute 2.1 whirlpool miner download Halley GHS G-Blade voltage mod ccMiner 1.4.7.SP AMD GPU miner cgminer gridseed windows Brave BTC wallet BTC38 LDC info Mining Edition video cards USDE mining coin control qt wallet Steem windows miner Antminer X3 ASIC Bitcon ASIC efficiency sweet spot Ethereum prfoitability BET info Poloniex increase power limit cryptomaps Hashie problem DragonMint B29 ZEC mining claculator ccMiner LuxCoin panic sale GENE info X14 rent gpu mining frame NOC info ASUS Mining RX 470 Bitstamp Gold Bitcoin ASIC power usage Bitcoin Gold exchange FSP crypto mining Ronpaulcoin pools NYDFS BitLicense XMOS ETH Polaris 20 X14 hashrate SummerCoin V2 Steem mining guide Neocoin pools Blakecoin Nvidia bfgminer 4.0.0 Gridseed Bitmain BM1360 X11-Gost NiceHash Quark info Vega mining Dirac Blake-256 MEOW trading cgminer 3.7.8 neoscrypt windows ccminer hashrate test Bitcoin Index X11 ASIC miners Ethereum solo mining proxy XCN miner

As you can see, factory overclocked cards to help add slightly more performance in Zcash mining. A direct result of improved hash rate is higher earnings per day. Note, this analysis was done on 20 May 2017 and it will have changed in the 48 hours until it was published, but these are good general guidelines:

The only drawback is that the miner currently only supports connection to NiceHash, so you cannot use it with other pools. While this might nit be bad during the slow start of ZEC mining, after that you might still want to go for mining and keeping Zcash instead of immediately selling it for profit. Hopefully in the next few weeks we are also going to see more development happening for Nvidia users and that goes not only for Linux, but for Windows users as well.

Hi Marilyn, Imgur.com is a good site for image uploads, just as a tip. The Mega page won’t load for me for some reason, probably due to my browser config. Google Drive works though. The one you want to download is Zec miner 0.3.4b – or whatever the latest working version mentioned on the forum page happens to be. I’m not really understanding the problem. Sounds like you downloaded the miner OK, just it’s named differently? That won’t be an issue. I suggest you run some virus scans on the miner you downloaded and then proceed with the rest of… Read more »

Nicehash Zcash minerSilentArmy Zcash minerClaymore’s Zcash AMD GPU minerEthminerGenoilClaymore CryptoNote GPU MinerClaymore CryptoNote Windows CPU Minerccminer-cryptonightCPUMiner-MultiYam minerEWBF Cuda BTG minerClaymore’s BTG AMD GPU miner

Pro tip: check out the following GPUs: Nvidia’s GTX 1060-6GB/1070/1080 Series; AMD’s RX 470/480, RX 570/580, R9 Series, or HD 7990/7950 (if used cards are available, try to get them from a gamer instead of a miner, with a warranty if possible). As with everything, do your own due diligence to evaluate GPUs based on their hashrates, power requirements, availability, and price.

The GeForce® GTX 1080 Ti is NVIDIA’s new flagship gaming GPU, based on the NVIDIA Pascal™ architecture. The latest addition to the ultimate gaming platform, this card is packed with extreme gaming horsepower, next-gen 11 Gbps GDDR5X memory, and a massive 11 GB frame buffer.

FPGA   Field Programmable Gate Array, an FPGA is the former king of the Bitcoin mining world. An FPGA is an integrated circuit whos function can be changed as it can be reprogrammed. This makes if more versatile than an ASIC, but far less efficient in its ability. They enjoyed a short time between GPUs and ASICs as the most efficient way to mine. For further details, please see our hardware page.

Please keep this in mind before you assume that this is profitable and buy hardware. If you were mining in December 2016 assuming a $90-100 price, by January 2017 to early March 2017 your Zcash stash was worth 1/2 to 1/3rd.

After you have accumulated a certain amount and you wish to withdraw it, click “wallet” and then “cash out”. Verify the amount and wallet address first. Within a few minutes, the amount will be sent to your wallet.

ZCash uses Equihash as an hashing algorithm, which is an asymmetric memory-hard PoW algorithm based on the generalized birthday problem. It relies on high RAM requirements to bottleneck the generation of proofs and making ASIC development unfeasible, much like Ethereum.

I don’t fully understand your question. Only the machine running the zcash4win program will do that actual mining, using its system resources. However, you can have a Zcash wallet on any machine and the mining rewards can be sent to that wallet. So you can have one machine doing the work of mining and any other machine to receive the Zcash which is mined. Hope that helps.

For this test, we are using the EWBF 0.3.3b miner. We are comparing all of the GTX series GPUs in terms of mining performance as well as power consumption. For the NVIDIA GTX 1070, GTX 1080 and GTX 1080 Ti we have both Founder’s Edition and overclocked variants. We did not test the GTX 1050 (2GB) and GTX 1060 (3GB) variants because they have significantly lower value for gaming and machine learning. We are assuming these GPUs are not dedicated miners and instead Zcash mining is something to utilize hardware while it is idle/ offset costs.

The dstm’s ZCash Nvidia miner has been available for a while and we’ve been keeping a track, but it was only for Linux operating systems – not anymore. With the latest version 0.5.2 the miner is also released for Windows in a 64-bit binary and not anymore available only for Linux miners. The miner is closed source one and comes with a 2% developer fee included. It support Nvidia-based GPUs with Compute Capability 5.0 or later, meaning it is for Maxwell or the newer Pascal video cards. There is support available for stratum as well as for NiceHash’s extranonce, so it can be used there as well without problems for selling Equihash hashrate.

The Zcash software can be a complete package that helps you run full node. This software is offered by Zcash Company this software let you mine with your CPU. It has a built in wallet that is needed to send and receive Zcash.

While not mandatory, it is recommend to install a GPU overclocking utility such as MSI Afterburner to be able to optimize your GPU settings to mine the most efficiently. The installation of MSI Afterburner is straight-forward and should not require a reboot. For the EWBF miner there is nothing to install as we will be simply extracting the programs folder and running the program’s exe. We will however need to modify one of the example batch files included with the miner in order to get started.

It is important to know, that mining on a personal computer is supposed to be done for the purpose of learning. In order to generate profit and achieve massive cooling as well, it is better to build or purchase dedicated mining machines.

Earlier today Zcash (ZEC) went live as expected and people are already starting to mine it, some of them probably are still not aware of the slow start with very small block rewards initially. Regardless, with what is available as miners at the moment there are pretty much two places where you would want to go for mining if you still haven’t done so. The first one for CPU mining and CUDA mining is Flypool that uses a modified version of NiceHash’s stratum miner available for download here CPU/CUDA miner for Flypool.

Once you have your batch file configured with your settings, it is time to test it out. Save and close the text editor and then double click on the batch file to run the program. If everything is running correctly you should get a screen similar to the one shown below:

In either case it continues like this indefinitely, seemingly without getting any real work done. EWBF and dstm miners have been working fine both with and without VPN. I’m using a GTX 1070 on Windows 10. Please advise.

All of these calculations can change based on mining difficulty as well as Zcash price fluctuations. Here is a view of what 1 December 2016 to 20 May 2017 Zcash pricing looks like via Poloniex (one of the larger exchanges):

“http -finance yahoo”

Both brands of GPU can be good at mining Zcash depending on the model. It will take some research to find what the Cost/Performance/Electricity consumption trade-offs are. Here a list of places to start:

I can run it over my laptop with no issue but unable to run it on my Desktop (as it is on domain) Is there a way to run this script over a local network by using my domain username and password ? etc ? Thank you

 AMD GPU miners were recently getting quite the boost thanks to Claymore’s Zcash miner on Windows, but now Windows users with Nvidia GPUs also got a nice boost in ZEC mining performance thanks to the release of the NiceHash EQM Zcash Nvidia Optimized Miner. It kind of doubles the performance that people were getting with the previous nheqminer from Nicehash, so now with a 6x GTX 1070 GPUs for example you can be all the way up to about 400 H/s. Do note that the miner currently supports only newer Nvidia GPUs and will apparently not work on anything lower than SM 5.0 capable GPUs – Maxwell or Pascal.

If all is looking good at this point, congratulations, you have successfully setup the EWBF miner and pointed it to a pool and are earning Zcash. After some time you can go to the Payouts tab to get a rough estimate of your expected income, but the numbers don’t really mean much until at least 24 hours of constant mining have gone by.

For the nVidia software, we will be configuring the start.bat file. Simply right click to edit in notepad. Once opened, we can set the server address, and your Zcash public address. For this guide we will use the ‘us1-zcash.flypool.org’ server, but choose the server closest to you. Your Start.bat file should now be configured similar to mine as seen below.

Block   A block is a unit of the code the comprises the bockchain. It is the record of transactions that have occurred since the last block was created and a confirmation to previous transactions. Each block links to the block before it, thus creating a full chain back to the original or “genesis” block.

Not everyone has the proper knowledge, time and patience to start Zcash mining on their own but still you can go for Zcash mining using your own computer.  If you have already decided to mine Zcash, you should know what hardware you need to use. First of all you go for right hardware, then software. There are so many software types available in market that works with various different hardware configurations.

There is a new miner for Nvidia CUDA GPUs available for mining Zcash (ZEC) promising a slightly faster hashrate than the currently fastest implementation of the NiceHash EQM Zcash NVIDIA miner. The most important thing about this new miner is that it is not limited to only mining on NiceHash, so even with the same speed it is still a nice thing to have as it supports Stratum mining on other mining pools besides NiceHash (it does seem to support NiceHash’s Extranonce Subscribe as well). According to the author of the miner it is designed for Nvidia Pascal GPUs, but should work on older Compute 3.0 or higher Nvidia GPUs with at least 1 GB of video memory. Do note that the miner is not open source and there is only a Windows 64-bit binary release available at the moment, it does not seem to be based on other popular codebase and is not being reported as malicious software by antivirus products. You might still want to have something in mind as the user that posted it on Bitcointalk is a new account and not an established miner developer, even though it seems that the miner does work pretty well.

As you can see, pricing has some fairly wild swings. As another example, this article was written Saturday, 20 May 2017 when the price was $104 USD to 1 ZEC. On Sunday 21 May 2017 the price hit $123. At the time of this publication (9AM Pacific 22 May 2017) 1 ZEC is now around $248. Prices fluctuate, a lot.

It can also help to check your equipment on different mining profitability websites. Sometimes the estimations vary so you can get a more accurate prediction by trying out different calculators. Some worth mentioning are:

Yuval has been on several customer facing and management positions in software companies and projects. An industrial engineer with a passion for business, technology, and innovation. Loves to create while having fun!

Using the exact same stable msi AB settings I dialed in with DSTM, I tried it out for 24 hours and didn’t get a single crash and rejected shares were single digits out of almost 3k shares submitted and my overall hashrate went up +60 sol/s. I’ve also noticed it doesn’t mind when I’m tuning the graphics cards while and have never gotten a bsod or frozen pc in days now. Cherry on top is that I personally like the telemetry screen which is a bit nicer to monitor over dstm’s. Devfee is the standard 2% same as all the others.

I will go through start to finish on how to set up a Zcash miner on Ubuntu. This is because if you are mining with an Nvidia Graphics card the windows drivers are a little wonky so you will be limiting your hashrate. For me I have 2 GTX 980ti’s in my gaming computer. When I mine Ethereum on windows I get around 5 Mh/s and when I mine on Ubuntu I get 40 Mh/s. For those of you with gaming computers this can be a nice passive source of income while you aren’t playing games. Also AMD GPUs tend to be better at mining Ethereum, but Nvidia GPUs are better at mining Zcash. So if you have an Nvidia GPU I would suggest to mine Zcash. I do. If you have AMD GPU’s I would suggest looking at this guide here.

ccminer lyra2re download MtGox gone hodlminer source LTC halving 5-chip Dual Miner litecoin gpu miner GAW Qubit ASIC Compute 2.1 whirlpool miner download Halley GHS G-Blade voltage mod ccMiner 1.4.7.SP AMD GPU miner cgminer gridseed windows Brave BTC wallet BTC38 LDC info Mining Edition video cards USDE mining coin control qt wallet Steem windows miner Antminer X3 ASIC Bitcon ASIC efficiency sweet spot Ethereum prfoitability BET info Poloniex increase power limit cryptomaps Hashie problem DragonMint B29 ZEC mining claculator ccMiner LuxCoin panic sale GENE info X14 rent gpu mining frame NOC info ASUS Mining RX 470 Bitstamp Gold Bitcoin ASIC power usage Bitcoin Gold exchange FSP crypto mining Ronpaulcoin pools NYDFS BitLicense XMOS ETH Polaris 20 X14 hashrate SummerCoin V2 Steem mining guide Neocoin pools Blakecoin Nvidia bfgminer 4.0.0 Gridseed Bitmain BM1360 X11-Gost NiceHash Quark info Vega mining Dirac Blake-256 MEOW trading cgminer 3.7.8 neoscrypt windows ccminer hashrate test Bitcoin Index X11 ASIC miners Ethereum solo mining proxy XCN miner

(ZEC) This is what happed to me. I lost one “Pending” payment, and that “Pending” last for at least 6hrs. When I woke up in the morning, that Pending was gone, no payment. I checked all the top miners, they have the same thing, I don’t know if they notice or not. Many times, the number for “Balance” freeze for couple hrs. I’m pretty confidence to say that, nanopool does steal coins. However, I tried flypool (steal hashes), and Dwarfpool, and turns out this pool is ok to mine.

GeForce GTX 590, GeForce GTX 580, GeForce GTX 570, GeForce GTX 560 Ti, GeForce GTX 560 SE, GeForce GTX 560, GeForce GTX 555, GeForce GTX 550 Ti, GeForce GT 545, GeForce GT 530, GeForce GT 520, GeForce 510

Private Key   This is the part of data that you keep secret in your Bitcoin wallet. Every Bitcoin address has a unique private key attached. Possession of this key is what allows you to maintain control of those bitcoins. If someone else is able to obtain your key, they also have control of your bitcoins.

PIMP team has created your favorite mining software such as BAMT 2, PiMP, PoolManager, SeedManager, FarmWatcher, and Miner.farm. With world-class support, business dev, and server experts. By miners, for miners.

“ether cryptocurrency _crypto market cap”

Next, you will have to ensure you have the correct virtual memory enabled (minimum 16GB). To do this, search for system in the start menu. Open system and on the left hand side click ‘Advanced System Settings.’ Go under the advanced tab, under performance settings, and advanced again. Then click ‘Change’ under virtual memory. Uncheck the box that states to ‘Automatically manage paging file size for all drives’ and then input a custom size of 16384 (or whatever is the maximum allowable value up to 16GB) into the Initial and Maximum size fields. This will prevent you from having any errors with virtual memory.

–user   (this will be your wallet address followed by a dot (or period) and an optional name for your rig. In this case I am simply calling it the model of my video card or GTX1080).

August update on my mining farm, proudly joined the 30,000 club with over 30k sols / hash on equihash which I am currently mining Zcash or ZEC with. I am using the 1080 TI, 1080 TI, 1080/1070/1060 Mini Trio GPU DIY Rig build.

Nicehash Zcash minerSilentArmy Zcash minerClaymore’s Zcash AMD GPU minerEthminerGenoilClaymore CryptoNote GPU MinerClaymore CryptoNote Windows CPU Minerccminer-cryptonightCPUMiner-MultiYam minerEWBF Cuda BTG minerClaymore’s BTG AMD GPU miner

You need to take in to consideration the system which requires another 100w. 1080 with 80 percent power and 2 1060 also at 80 percent power should be fine. If it doesn’t work try to reduce power further to 75 percent. I have my 1080s set to 70 percent power.

Following the startup information. we can see we are getting block information from the pool and that our graphics card(s) are detected and being assigned new work. After a little bit you shoudl start seeing shares accepted messages indicating your GPU has found a solution, submitted it the the pool and it was accepted.

The whole Zcash mining process includes set up, miner downloading, configuring windows and batch file setting to run and much more. Zcash generally uses equilhash as a hashing algorithm. This is an asymmetric memory hard PoW algo. This is based on the generalize puzzle. It relies on high Random Access Memory needs to bottleneck the generation of proofs and ASIC development unfeasible.

The biggest limitation of the official Zcash software is that it only takes advantage of your CPU to mine. If you have decided to build a dedicated GPU rig for mining the basic software will not be enough, you will need to decide on software has been optimized to take advantage of your GPU’s.

Simply plug in Freedom Miner to any 110-240V power outlet, plug in the Ethernet connection to your router or cable modem, turn it on and it will begin mining right away. A typical 15A circuit can support two Freedom Miners (7.25A / Unit), assuming no other equipment is being powered at the same time.

Click on “workers” and choose one of the jobs (Account’s default jobs) according to your card. Run the file you have created (mine.bat). Make sure that there are no errors and that a message approving your worker has been received. If you did not get this message, it means you did something wrong. After the program starts running you will see that the worker (called the miner) is added to the “workers” screen. On the site, click “Dashboard” to see data about the mining (it will take some time until you see something; it is updated according to the work that the mining machine does).

This is a list of the most popular Zcash Mining software for each platform, some of this software contains a built-in developers fee. I try to keep this list up to date as I can, if there is a broken link or missing software please drop me an email.

Some settings should be modified in Windows to get you ready for mining.  First, you don’t want your computer to go into Sleep mode, as it will interrupt your mining. Go to your Power Settings and set Turn Off/Sleep to Never.

I would recommend EWBF miner for Zcash, but Claymore dual mining is just as good. Just in case anyone doesn’t know you can dual mine any coin you want, your not limited to just ETH and Decred or ETH and SIA. Just need to read the “Read Me” Text doc in your miners folder. I made a short explanation video, mind you I am not a top end Content creator… but should help..

Buying gear and mining cryptocurrency with it allows you to own an income-producing asset in the gear itself, with aftermarket resale value holding up very well and even appreciating. GPUs purchased for mining in 2015 and 2016 were often sold at a profit in 2017 due to high demand in the market!

After letting your newly setup miner run for about 20-30 minutes, you can check the pool to confirm you shares are being counted and see some pool-side statistic of your mining progress. On the top right of the Flypool Zcash homepage (shown above) you can enter your Zcash wallet address and click on Check Status to get to your own wallet personal statistics page.

3 mothts ago, I mined Zcash, but now profit is very low. Now i mining altcoins, for example Stipend, FOLM, and other. Now i now a lot of other algo and how they mining with howtomine.online for example.

“zec wallet |data encryption”

SHA-256 and Scrypt USB ASIC scrypt.cc review cpuminer-multi thermal images Dirac minebox Skein FD-SOI technology sph-sgminer download cgminer gridseed windows Pywallet luffa512 miner sgminer ETH FreshCoin gpu miner GTX 750 Ti mining rig AMD Radeon RX Vega ethereum hashrate AMD HBM GRC alt crypto genoil-1.1 pre x14 amd miner RVN AMD miner TEK exchange GeoiCoin CoinMarketCal IXC info H61 Pro BTC Bitmain AntMiner T9 BlakeBitcoin exchange BTC hard fork Monero (XMR) GlobalBoost pool mining contracts sgminer 5.3.1 tpruvot Zcash mining claculator RVN gpu miner BUN KARM mining DCY Nvidia GeForce GTX 970 Blake2b miner BLA exchanges SolarCoin crypto withdraw Block Erupter Cube performance QCN mining BIT Synergy crypto FusionCoin DGC Antminer S9 BCC FSC info VPNcoin exchange Tesla AMD shortage GP106-100 ethereum performance DP trading SBC exchange Blizzard X6 power usage GV-N75TOC-2GI Bitcoin backlog DogecoinDark exchange ccMiner Hcash bfgminer 4.2.0 zeus CEX SEPA support sgminer vnl windows

There are many risks when it comes to Zcash mining on your NVIDIA Pascal desktop GPU. First, Zcash pricing can be unpredictable. We have seen major drops in value before (depicted above.) One also needs to be able to convert Zcash to standard currency which may incur transaction fees and/ or be difficult.

Well you need to do your own due diligence, but if you click on the link originating from the Bitcointalk EWBF support thread you should be taken to the authors downloads, which many users have reported as safe.

Before we begin, it is important to note that the responsibility of mining rests only with the miners themselves. Caution is required when running a computer and using high power for a long period of time. We have never heard of case where a miner burned a house down, but computers can certainly smoke. In addition, no one is guaranteed to see profits due to fluctuations in exchange rates and a change in mining difficulty level and performance.

I have a Trojan.GenericKD.5331716 in any download for the nheqminer for windows. Does not matter what source I go to. Best be aware. If someone has a source that does not contain it, would be happy to receive.

Mixing reinvented for your privacy ChipMixer.com ChipMixerwzxtzbw.onion Advertised sites are not endorsed by the Bitcoin Forum. They may be unsafe, untrustworthy, or illegal in your jurisdiction. Advertise here.

Freedom Miner is a Zcash Miner beast and is defaulted to mine ZEC out of the box. However, changing currencies is a breeze before or after you receive the rig. During purchase simply provide us with your wallet addresses for the coins you wish to mine and we’ll send your rig pre-configured. Don’t have wallet addresses yet? No problem, we can ship your rig with our system defaults. Freedom Miner comes with a standard 3-prong US style power cord, but other standard power supply cables are compatible as well.

Troubleshooting tip:  Some miners have had success installing all GPUs at once, then installing the drivers. Others prefer to install only one card, install the drivers, shut down the system, and then install the rest of the GPUs.

Several months ago, we tried Zcash mining in Docker and even published Docker containers for CPU mining. Although we have CUDA enabled Monero mining containers, they performed well, but not significantly better than CPU mining. When we built a new image with Pascal GPUs we found that NVIDIA GPUs can keep up profitability in-line with using AMD GPUs to mine Zcash or Monero.

Now that you’ve got your hands dirty, just sit back and watch your zcash roll in! Be aware that you are mining to a transparent address (it starts with t). You can follow this guide to learn how to create a private and transparent wallet

I’ve done a search here and no one is talking about Bminer a new Equihash miner released last month. from gpumining I started with EBWF then I discovered DSTM which was the tits with the higher hashrate but it was fairly unstable if I tried to adjust the vid cards through MSI AB giving me hard freezes or bsods. Sometimes they happened a short while after I walked away after adjusting a setting to give it time to settle. Sometimes hours later. I saw this post: https://bitcointalk.org/index.php?topic=2519271.320 and tried it out. Using the exact same stable msi AB settings I… Read more »

Routinely during its operation the miner will also display useful information such as the GPU temperature(s), sol/s per card and total sol/s. The part highlighted in a table fashion is what was enabled by using the –pec flag above and displays a rough efficiency reading you can later use to help fine tune your settings.

GeForce GTX 680MX, GeForce GTX 680M, GeForce GTX 675MX, GeForce GTX 675M, GeForce GTX 670MX, GeForce GTX 670M, GeForce GTX 660M, GeForce GT 650M, GeForce GT 645M, GeForce GT 640M, GeForce GT 640M LE, GeForce GT 635M, GeForce GT 630M, GeForce GT 625M, GeForce GT 620M, GeForce 610M

Tags: Equihash, Equihash miner, Equihash mining, Genesis Mining, Genesis Mining Zcash, Genesis Mining ZEC, HashFlare, HashFlare Equihash, HashFlare Zcash, HashFlare ZEC, Nicehash, Zcash, Zcash cloud mining, Zcash CPU miner, Zcash crypto, Zcash details, Zcash GPU miner, Zcash miner, Zcash mining, Zcash specifications, ZEC, ZEC cloud mining, ZEC CPU miner, ZEC crypto, ZEC details, ZEC GPU miner, ZEC miner, ZEC mining

Keep in mind that your profitability will depend mostly on your electricity and internet costs. As such, it’s common to find large mining operations close to power plants, as those ventures tend to strike up B2B rates with the plants themselves to ensure profitability. But don’t worry, it’s likely that your conditions could lead to a reasonable ROI (Return on Investment) as well. Just make sure to calculate the ins and outs of your situation before you make a sizable investment.

Building a large ZEC position through mining now may allow you to take advantage of price appreciation in the future with less risk than you’d face by just buying ZEC. Let’s break this idea down a bit further.

I started with EBWF then I discovered DSTM which was the tits with the higher hashrate but it was fairly unstable if I tried to adjust the vid cards through MSI AB giving me hard freezes or bsods. Sometimes they happened a short while after I walked away after adjusting a setting to give it time to settle. Sometimes hours later.

The only drawback is that the miner currently only supports connection to NiceHash, so you cannot use it with other pools. While this might nit be bad during the slow start of ZEC mining, after that you might still want to go for mining and keeping Zcash instead of immediately selling it for profit. Hopefully in the next few weeks we are also going to see more development happening for Nvidia users and that goes not only for Linux, but for Windows users as well.

For the purpose of this guide, we’re going to do a detailed walk-through of setting up and using the very popular Nvidia EWBF Miner. If you have AMD cards, mining Ethereum is usually your most profitable option.

You can mine it to an exchange or to hardware wallet like Ledger Nano S. amd Trezor.  In this guide, we have mentioned all about the setting process of Nvidia EWBF Miner. You should know how to set and use it up.  Mining process can be very profitable for you if you have any AMD card.

Following the startup information. we can see we are getting block information from the pool and that our graphics card(s) are detected and being assigned new work. After a little bit you shoudl start seeing shares accepted messages indicating your GPU has found a solution, submitted it the the pool and it was accepted.

That is when I got a warm welcome into Genesis Mining, which is cloud mining. I was blown away and soon realized this is where the future of mining is headed. The average ROI now is 4 months which gives a whooping 20 months of profit.

I am currently using 1 MSI 1080ti seahawk x, 2 PNY 1080 ti FE and 2 ASUS 1080 ti Turbo. Definetly recomend the MSI and PNY, The ASUS turbo not too much, dont have backplate and not good for UV OC, If you are going to buy 1080 ti, this article have all the details all all 1080 ti models:

Ethereum value does fluctuate like many similar currencies but at it’s current value a return on investment in a few months is very likely . This is not guaranteed as I have no control over the value of Ethereum however it is showing great promise as many major institutions are investing. In addition to the value in mining Ethereum this system is flexible as it is a ASIC based miner so it can mine virtually any GPU

You can download the claymore zcash miner and choose a version. You can download it, you should go for the latest version. Open the zip folder and extract the file and use it. Zcash mining can be a great way promotes the purchase of high end and new GPU. Zcash can be traded for BTC that can easily be sold for cash. So Zcash mining is a good way to fill your bank account indirectly.

Equihash est un algorithme de hash spécifique qui a été créé par les créateurs de Zcash. Une de ses particularités est que cet algorithme demande une très grosse quantité de mémoire vive (RAM) et une grosse bande passante à cette mémoire pour que le mining soit profitable. Ainsi la production d’ASIC est à ce jour impossible et seules les cartes graphiques peuvent réellement le miner. (Il est également possible de miner equihash avec son CPU mais cela n’est vraiment pas rentable et il y a plus de perte en énergie que de gains.)