“cryptoworld _capital investment”

6. It is recommended that you install applications such as MSI Afterburner in order to control the card’s fan. In its default mode, the power is low and it allows the card to reach a temperature of 70-80 degrees Celcius (normal when playing occasionally but not healthy when it comes to a machine running 24-hours a day).

Another cloud mining service provider that has been available for quite some time already as well – HashFlare has also announced their plans for offering cloud mining hashrate for Zcash (ZEC). They have already started the presale of mining contracts with a price of 4.20 USD per 0.1 H/s with the launch of mining planned to start before 21.11.16, so you will be able to catch some of the slow start mining period as well. Each of their Zcash cloud mining contracts will last for 1 year (from activation) and will not have any additional fees as everything is apparently included in the price.

Similar to the Claymore miner (which does not currently support Zcash mining under Windows), the EWBF miner contains a 2% developer fee which can be turned off in the batch file. It is noted in the thread that disabling the fee will slightly reduce hashing power, similar to that same behavior with Claymore’s miner.

August update on my mining farm, proudly joined the 30,000 club with over 30k sols / hash on equihash which I am currently mining Zcash or ZEC with. I am using the 1080 TI, 1080 TI, 1080/1070/1060 Mini Trio GPU DIY Rig build.

In my videos, I teach you how to mine Ethereum, Bitcoin, Litecoin, Dash, ZCash and many more coins. I have many how-tos on mining altcoins like Ethereum, along with guides on setting up wallets for altcoins. I also discuss many cloud mining sites such as Hashflare and Genesis Mining. With Hashflare and Genesis Mining cloud mining services you can start mining Ethereum, Bitcoin and other coins without any equipment of your own. Check out my video playlists and other videos for more information.

I have a lowly GTX 1060 and only started mining with it two days ago. I used ewbf first because it was listed first on miningpoolhub. After playing with it some, it would peak for me about 291 h/s. The average was closer to 288. I could push it to 300, but only by risking arrest for GPU abuse. I switched to dstm last night and am averaging 314 h/s. Even with the fee, I’m better off. Your mileage may vary.

The card should have at least 1 GB of RAM, or it won’t be able to properly mine Zcash. This is a correction from the video, as EWBF supports GPUs with just 1 GB of RAM, compared to Ethereum’s 3 GB requirement. However, many older cards may not be energy efficient enough to turn a profit, so check on whattomine.com by entering your card’s info.

The EWBF CUDA Zcash Miner has a built-in developer fee that is set at 2%, meaning that every 10 minutes the software will switch to a different pool and mine for the developer some shares and then get back to mining for you. The author of the software claims speeds of about 250 H/s for Nvidia GTX 1070 the NiceHash EQM miner does currently about 220 H/s on the same GPU. Our quick tests showed a hashrate of about 235-240 H/s average (up to 250 H/s) on stock GTX 1070, so still slightly faster, but not as much as you may want it to… then there is the dev fee as well and it seems that we are seeing somewhat more rejects than, especially when switching to mine for the dev fee. So while this may be an interesting alternative for users willing to mine outside of NiceHash, the actual performance that you may get poolside may not be much different than with what is currently the fastest implementation from NiceHash (taking into account the dev fee and the rejected shares)…

However, if you have Nvidia cards, or if you’re in the market to buy new cards and can’t find any well-priced AMD cards, then mining Zcash on Nvidia GPUs is still very profitable with the EWBF Miner, which is highly optimized to get the maximum performance out of Nvidia’s Cuda cores.

Today the blockchains of Bitcoin and Ethereum are so heavily loaded, that even participation in a mining pool has become unprofitable, as the amount of resources invested in mining (electricity bills) usually exceeds the return. For this reason, the mining guide we are presenting today is a Zcash mining guide.

It does mine but there is no way to get paid and you need to put your wallet address in some other website,the app crashes and suddenly stops constantly, it needs an update to fix all those software errors,is really bad design it should pay immediately after is done hashing and it should have a place to put your wallet so it sends the coins to the wallet directly and have no issues, very hard to get support, it seems to be working and hashing but just can’t get it to pay or no support, i don’t recommend it seems like a gimmicky lie

A: You can run the miner like all previous versions with command line arguments, in this case the config file will be ignored. If you sets the –config argument, the specified config file will be used, all other command line arguments will be ignored. If you run a miner without command line arguments, the miner will try to use the default config file miner.cfg.

ASIC   Application-specific Integrated Circuit, an ASIC is the current ‘top of the line’ technology used in Bitcoin mining. It is able to generate orders of magnitude more hashes per watt of power than the next best technology. For greater detail, please see the hardware page.

Please do not place your order with anyone or anybody claiming to be an official AsicMiner Market representative over email or Skype. It can be a scam and your confirmed order may never be delivered in such cases. AsicMiner Market is neither responsible for nor offers any kind of compensation in such cases

We’ve been using Nanopool for our ETH mining rigs for over 4 months, and it works just fine. Dashboard is very clear and makes it easy for newbies like us to setup. Payments are released once or twice a day when every time we reach our ETH threshold. So far, no caomplaints whatsoever. Plus, they send you email notifications every time a rig stops mining for any reason.

If you’re reading the newbie’s guide to Ethereum mining and have a GPU that’s powerful enough to make it worthwhile, we’re going to assume you’re running Windows, so we’ll focus on mining Zcash on that platform.

Because of the slow start mining that Zcash has implemented the block reward is still growing, so even with price going down and the total network hashrate going up the overall profit for mining and selling Zcash remains pretty stable and most importantly pretty high compared to other crypto coins at the moment. Because of that it is a wise decision to mine and sell Zcash at the moment until the end of the slow start of mining when the block reward will stabilize at the maximum level of 12.5 ZEC and that should provide a more stable price per coin than at the moment. Mining ZEC coins now and keeping the coins may result in them loosing significant value at least in short term, though in long term it might still be a viable option, so consider what to do carefully.

After creating an account you’ll need to setup a worker to help keep track of your mining progress, to do this use the link below and add a new worker to your account called worker1 and set the password as x. (or use details as you see fit)

There are many risks when it comes to Zcash mining on your NVIDIA Pascal desktop GPU. First, Zcash pricing can be unpredictable. We have seen major drops in value before (depicted above.) One also needs to be able to convert Zcash to standard currency which may incur transaction fees and/ or be difficult.

If you’re interested in taking your crypto mining to the next level, sign up at Crypto Mining Academy, where I go massively in-depth, detailing every step of this process in a comprehensive course. Happy mining!

Ran the same settings on both miners and it’s more like 4-5% more than EWBF. 1080 + 1070 =~1020 Sol/s on Bminer with 60% Power limit and 350 W at the wall. On EWBF it’s ~970 Sol/s for both. The 1080 gets the biggest boost on Bminer about 10% ~574 Sol/s with 60% power limit. I’m mining on Flypool which only shows the effective hash rate, so it will take a while to be accurate but it seems legit.

For the nVidia software, we will be configuring the start.bat file. Simply right click to edit in notepad. Once opened, we can set the server address, and your Zcash public address. For this guide we will use the ‘us1-zcash.flypool.org’ server, but choose the server closest to you. Your Start.bat file should now be configured similar to mine as seen below.

The whole process of getting set up, downloading your miner, configuring Windows, and setting up your batch file to run should take less than 20 minutes. Follow along with the steps in the video guide below, or read on for a full text guide.

just wanted to add: especially the 1060 series is a good candidate for mining with lower power consumation. Even Equihash can be run with like 75 to 84 % power which can result in : 297 Sol/s , 86 watt usage, -> 3.45 sol/w

So get mining, folks! And for the less knowledgable I can warmly recommend cloud mining. But make sure you choose a reputable one that has been around a while. I just chose Genesis Mining based on research and they got good discounts every now and then, like right now there is a coupon code you can grab: 809fKo

Leave a Reply

Your email address will not be published. Required fields are marked *