For this test, we are using the EWBF 0.3.3b miner. We are comparing all of the GTX series GPUs in terms of mining performance as well as power consumption. For the NVIDIA GTX 1070, GTX 1080 and GTX 1080 Ti we have both Founder’s Edition and overclocked variants. We did not test the GTX 1050 (2GB) and GTX 1060 (3GB) variants because they have significantly lower value for gaming and machine learning. We are assuming these GPUs are not dedicated miners and instead Zcash mining is something to utilize hardware while it is idle/ offset costs.
The only drawback is that the miner currently only supports connection to NiceHash, so you cannot use it with other pools. While this might nit be bad during the slow start of ZEC mining, after that you might still want to go for mining and keeping Zcash instead of immediately selling it for profit. Hopefully in the next few weeks we are also going to see more development happening for Nvidia users and that goes not only for Linux, but for Windows users as well.
Another cloud mining service provider that has been available for quite some time already as well – HashFlare has also announced their plans for offering cloud mining hashrate for Zcash (ZEC). They have already started the presale of mining contracts with a price of 4.20 USD per 0.1 H/s with the launch of mining planned to start before 21.11.16, so you will be able to catch some of the slow start mining period as well. Each of their Zcash cloud mining contracts will last for 1 year (from activation) and will not have any additional fees as everything is apparently included in the price.
4. For all repairs or RMA, within warranty or not, customer must return the defective parts at his/her own expense after opening a support ticket and troubleshooting with Asic Miner Market instructions.
TBMINER has no duty to provide the service of installing and debugging door to door. The accessories are provided by TBMINER, and the installing and debugging are responsible by the customers themselves after buying. The install video could get from our website, please click to view.
Next, copy your Zcash wallet address. Inside the bat file paste your own Zcash address (in the example above replace the address that starts with “t” and ends with “DX”). After replacing the address you can also change the worker name. In this case it’s .rig1, but you can call it .miningRig1 for example.
Some settings should be modified in Windows to get you ready for mining. First, you don’t want your computer to go into Sleep mode, as it will interrupt your mining. Go to your Power Settings and set Turn Off/Sleep to Never.
[WARN] [2017-12-04T23:58:59+03:00] Get error: A request to send or receive data was disallowed because the socket is not connected and (when sending on a datagram socket using a sendto call) no address was supplied., resetting in 5 seconds
The other thing is wallet that you need to complete the mining process. You require a wallet to receive, send and store your funds. There are multiple GPU wallets available and you can choose the right one. You can compare the features and reviews.
If you are mining where power is expensive (e.g. Northern California), then that will significantly hit profits. What this does not take into account is that if you are doing this in a home or office where you also need to pay peak pricing and air conditioning costs, the profitability can be much lower. On the other hand, if you are in a data center then you can easily plan for power and cooling costs.
You can also use a hardware wallet such as Trezor, Ledger Nano S, or Jaxx, a popular supported web wallet. You can even mine directly to exchanges that have which is primarily what I’ve been doing since November 2016 (I’ve been mining to Bittrex).
Now I will say I know how to use Linux and I have built quite a few computers with this OS, but this is just a list of dependencies that if I run all of them I don’t have any problems. Some of them might not be needed, but they won’t hurt. You will want to open your terminal by pressing ‘Ctrl+Alt+T’, and copy and paste these lines into the terminal and press enter. To paste into the terminal you can not just press ‘Ctrl+V’ you need to press ‘Ctrl+Shift+V’. And if for some reason you need to kill a process that is running in your terminal you need to press ‘Ctrl+C’. So here are all the dependencies, this is easily the longest part of the tutorial.
The card should have at least 1 GB of RAM, or it won’t be able to properly mine Zcash. This is a correction from the video, as EWBF supports GPUs with just 1 GB of RAM, compared to Ethereum’s 3 GB requirement. However, many older cards may not be energy efficient enough to turn a profit, so check on whattomine.com by entering your card’s info.
It can also help to check your equipment on different mining profitability websites. Sometimes the estimations vary so you can get a more accurate prediction by trying out different calculators. Some worth mentioning are:
Mining and holding crypto is similar to the old adage of buying low and selling high, except for the fact that most buyers don’t know how to do technical analysis, so they buy and sell at the wrong times. They buy high during parabolic price increases and sell low during what could be normal price corrections on continued upward trends.
For the purpose of this guide, we’re going to do a detailed walk-through of setting up and using the very popular Nvidia EWBF Miner. If you have AMD cards, mining Ethereum is usually your most profitable option.
Using the exact same stable msi AB settings I dialed in with DSTM, I tried it out for 24 hours and didn’t get a single crash and rejected shares were single digits out of almost 3k shares submitted and my overall hashrate went up +60 sol/s. I’ve also noticed it doesn’t mind when I’m tuning the graphics cards while active and have never gotten a bsod or frozen pc in days now. Cherry on top is that I personally like the telemetry screen which is a bit nicer to monitor over dstm’s. Devfee is the standard 2% same as all the others.
I think I will end this guide at this point for now as it is getting to be quite long. While I originally intended to cover fine tuning and going over other optional arguments that the EWBF miner can use, I think I will wait and make this a two part guide. For now this Part 1 covers the basic setup and configuration of getting the EWBF miner running and shares being submitted to a pool. Since it will usually take some time before reaching a pools minimal payout period anyway, especially for just one or two cards, we have some time.
The AM200 Ethereum Miner has been in development for a number of months with the goal of delivering a high quality solution suitable for almost any environment. Proper cooling, and web based management of the miner provide for ease of use not seen with many Ethereum Miners to date,
Editor’s Note: We ran this analysis on 20 May 2017 when Zcash’s coin ZEC was $104 USD to 1 ZEC. By the early morning Pacific time of 22 May 2017 that had hit $124. As this is about to publish it is currently at $248 USD to 1 ZEC. These markets fluctuate greatly.
Ran the same settings on both miners and it’s more like 4-5% more than EWBF. 1080 + 1070 =~1020 Sol/s on Bminer with 60% Power limit and 350 W at the wall. On EWBF it’s ~970 Sol/s for both. The 1080 gets the biggest boost on Bminer about 10% ~574 Sol/s with 60% power limit. I’m mining on Flypool which only shows the effective hash rate, so it will take a while to be accurate but it seems legit.