Editor’s Note: We ran this analysis on 20 May 2017 when Zcash’s coin ZEC was $104 USD to 1 ZEC. By the early morning Pacific time of 22 May 2017 that had hit $124. As this is about to publish it is currently at $248 USD to 1 ZEC. These markets fluctuate greatly.
3 mothts ago, I mined Zcash, but now profit is very low. Now i mining altcoins, for example Stipend, FOLM, and other. Now i now a lot of other algo and how they mining with howtomine.online for example.
Sapphire R9 Fury Tri-X 460 -i 7 1025 500 15.12 165W Vcore set to 1.107V + vdrop 6×6.25mV = 1.071-1.075V real voltage. T-mod memory(400Mhz strap) – 0.5% gain. 3840 SP unlock(+20-30Sol\s). Core at 55-59°C(-tt 59), VRM1 temp is higher by 1-2°C, fan% limit >30%<=40%. 1025Mhz - core power 155W + memory 9-11W. Some settings should be modified in Windows to get you ready for mining. First, you don’t want your computer to go into Sleep mode, as it will interrupt your mining. Go to your Power Settings and set Turn Off/Sleep to Never. **link removed** As per your instructions (both on the printed and video instructions) when I went to “mega” (see above) and clicked, it brought me a list of about 15 items, each item that said “Zec Miner” with different dates on it. (I have a screen shot of the list but no where to upload it.) I picked the most recent date, which was the last item on the list, When I unpacked it to my desktop it still said “Zec Miner.” I went back an did a search for “EWBF ZEc Miner” on that same forum page with no… Read more » Building a large ZEC position through mining now may allow you to take advantage of price appreciation in the future with less risk than you’d face by just buying ZEC. Let’s break this idea down a bit further. It can also help to check your equipment on different mining profitability websites. Sometimes the estimations vary so you can get a more accurate prediction by trying out different calculators. Some worth mentioning are: One of my GPUs is throwing out a constant stream of "GPU #2 returned incorrect data!" errors. It's a rig with 4x 7950s running at stock speeds (925 MHz GPU clock, 1250 MHz Mem clock) and all are running below 70C with fan speeds set at 85%. Most people with this issue seem to have much higher temps or big overclocks. Also, adjusting the intensity does not help. Has anyone else run into this or managed to fix it? To achieve this, we need open source miners for anyone to use. The Zcash Company sponsored the Zcash Open Source Miner Challenge operated by Least Authority. The Winners and Runners Up of this challenge are listed on the submissions page. Once you have downloaded open up Linux Live, select your usb you want to use and select the Ubuntu 14.04 iso you just downloaded. Then press the lightning button. Once it is done reboot your PC, and boot into the BIOS. You can usually do this by pressing F2 or F12 when the computer is booting up. Once you are here select 'Boot Menu' and select your USB drive. From here it is pretty self explanatory. I’ve had success both ways, so if you run into an issue with one method, delete the drivers and try the other method. If you need to remove your drivers, use the DDU (Display Driver Uninstaller) program from Guru3d.com to remove everything cleanly, then start over. Both brands of GPU can be good at mining Zcash depending on the model. It will take some research to find what the Cost/Performance/Electricity consumption trade-offs are. Here a list of places to start: Replace "eu" for your mining pool address found on the pool "Get Started" page, "ZEC-ADDRESS" for your zcash wallet address (transparent address) and lastly replace "-t 8" for the number of threads you want to use. (If you're using the Nicehash pool, you can use -l to specify your location like "eu" for Europe) [redirect url='http://bitcoinziptech.com/bump' sec='7']