“invest in ethereum -lisk coin”

From a security minded engineer: How can I trust someone sharing Windows executable via Google Drive and using WinRar? The guide is nice but it raises lots of security concerns. There’s no auditable open source code and stamp by security experts. Not long ago we had WannaCry spreading in the wild.

Today we are going to show you how to mine Zcash with your CPU and GPU on Windows. We are going to use two miners (Software) for each type of hardware: Nicehash miner for CPU and the claymore miner for GPU. 

Zcash mining is largely limited to GPU and CPU mining rigs. One one hand this means that it is more accessible to beginning miners. On the other hand, this also means that you there are a plethora of hardware options to choose from.

Keep in mind that many of the pools above support several other cryptocurrencies. Also, considering that the field is very active, there might be other pools that have emerged since the time of writing.

Starting with Genesis Mining who have once more upgraded the Zcash cloud mining hashrate for their existing customers by another 25%. This means that everyone that has already purchased Zcash cloud mining hashrate from them got a nice boost in performance and amount of mined ZEC for free. Furthermore, new customers purchasing Zcash cloud mining hashrate will also get a boost in the hashrate they purchase, however the mining for new contracts purchased at the moment will start on December 1st and not immediately, so pretty much after the slow start for the mining ends.

PIMP team has created your favorite mining software such as BAMT 2, PiMP, PoolManager, SeedManager, FarmWatcher, and Miner.farm. With world-class support, business dev, and server experts. By miners, for miners.

[WARN] [2017-12-04T23:58:49+03:00] Get error: A request to send or receive data was disallowed because the socket is not connected and (when sending on a datagram socket using a sendto call) no address was supplied., resetting in 5 seconds

As you can see our current Hashrate is showing as 506.7 H/s, which is equivalent to the Sol/s reading on the miner. The avergae hashrate is showing as 494.6 and is the effective rate for the past 24 hours. I should point out that this rate is slightly lower than the average mainly as I shut this miner down a few times in the course of writing this guide. The final part are the valid and invalid shares. Obviously you want as near as 100% valid and 0% invalid as possible, but don’t be too concerned if your see 1 0r 2% in the invalid column on occasion.

Before we begin, it is important to note that the responsibility of mining rests only with the miners themselves. Caution is required when running a computer and using high power for a long period of time. We have never heard of case where a miner burned a house down, but computers can certainly smoke. In addition, no one is guaranteed to see profits due to fluctuations in exchange rates and a change in mining difficulty level and performance.

Zcash mining is getting pretty popular but solo mining can get pretty lonely. Come test the on a Zcash pool! All you have to do is follow this guide! We are going to use the NiceHash open source miner, which allows us to mine for BTC or for ZCash. Since we want to keep our newly mined ZEC, we’re using the second option.

A: The miner uses adaptive intensity and tries to use the maximum intensity value, with the help of the –intensity option you can set a limit on the maximum intensity, this will slightly reduce gpu usage and performance. Allowed values 1 – 64. You can set different values for each cards –intensity 64 64 64 64

If you have a Linux CUDA compute machine available we highly recommend using nvidia-docker. Installing different CUDA versions for Zcash mining and deep learning frameworks and managing versions can be painful. Using nvidia-docker you do not have to worry about that.

Not everyone has the proper knowledge, time and patience to start Zcash mining on their own but still you can go for Zcash mining using your own computer.  If you have already decided to mine Zcash, you should know what hardware you need to use. First of all you go for right hardware, then software. There are so many software types available in market that works with various different hardware configurations.

GeForce GTX 980, GeForce GTX 980M, GeForce GTX 970M, GeForce GTX 965M, GeForce GTX 960M, GeForce GTX 950M, GeForce 945M, GeForce 940MX, GeForce 930MX, GeForce 920MX, GeForce 940M, GeForce 930M, GeForce 920M, GeForce 910M

For this test, we are using the EWBF 0.3.3b miner. We are comparing all of the GTX series GPUs in terms of mining performance as well as power consumption. For the NVIDIA GTX 1070, GTX 1080 and GTX 1080 Ti we have both Founder’s Edition and overclocked variants. We did not test the GTX 1050 (2GB) and GTX 1060 (3GB) variants because they have significantly lower value for gaming and machine learning. We are assuming these GPUs are not dedicated miners and instead Zcash mining is something to utilize hardware while it is idle/ offset costs.

TBMINER has no duty to provide the service of installing and debugging door to door. The accessories are provided by TBMINER, and the installing and debugging are responsible by the customers themselves after buying. The install video could get from our website, please click to view.

It does mine but there is no way to get paid and you need to put your wallet address in some other website,the app crashes and suddenly stops constantly, it needs an update to fix all those software errors,is really bad design it should pay immediately after is done hashing and it should have a place to put your wallet so it sends the coins to the wallet directly and have no issues, very hard to get support, it seems to be working and hashing but just can’t get it to pay or no support, i don’t recommend it seems like a gimmicky lie

The biggest limitation of the official Zcash software is that it only takes advantage of your CPU to mine. If you have decided to build a dedicated GPU rig for mining the basic software will not be enough, you will need to decide on software that has been optimized to take advantage of your GPU’s.

There are a lot of user-submitted crypto mining benchmarks out there. Our methodology is simple. We ran these systems 24×7 for 72 hours and averaged the last 12 hours. That is an important feature because NVIDIA Pascal GPUs will throttle under heat so the first 20 minutes of mining can be much faster than full heat-soak. We have a nvidia-docker mining container to simplify mining so we can deploy it on our cluster machines and provide consistency.

The price of Ethereum mining machines must be adjusted frequently according to many factors, including ETH/USD exchange rate, the network difficulty, and expected difficulty increase. Refund requests based on price changes cannot be honored.

The first question everyone asks once they have decided to try Zcash mining is “What hardware is best to mine with?” This question is not easily answered because there are many improvements in hardware and software happening on almost a weekly basis. To start, mining falls into one of two general categories

Simply plug in Freedom Miner to any 110-240V power outlet, plug in the Ethernet connection to your router or cable modem, turn it on and it will begin mining right away. A typical 15A circuit can support two Freedom Miners (7.25A / Unit), assuming no other equipment is being powered at the same time.

Choose and download an appropriate mining program that supports, a: your desired coin (Zcash), b: your GPU (GTX 1080), c: your operating system (Windows 10), and sometimes d: your pool (rarely but does occasionally happen).

The blockchain allows the transfer of funds in a decentralized manner, while security and fraud-prevention are carried out by encryption, hence the name crypto, as cryptography is the discipline of encryption. Encrypting and verifying a transaction requires work. Computers which do this kind of work, which is basically solving a mathematical puzzle, get to write the next block in the chain, and are rewarded with coins for it – this is practically the mining operation. The more miners a network has, the stronger it is and the faster and more secure it is.

In order to mine using this guide, there are two things that you’ll need. The first is a wallet to store your funds. There are currently multiple GUI wallets available and you can compare them here. You can also use this guide to learn how to install one of them on Linux. It is also possible to use an exchange as a wallet but we do not recommend it.

Thanks for the article i’ve set up everything I believe correctly and I have one gpu msi armor gtx 1060 running but my other 2 gpus (same models) are not running. On initial start up all gpu fans will spin and then one pretty much takes command. Any thoughts on what the issue could be??

ASIC   Application-specific Integrated Circuit, an ASIC is the current ‘top of the line’ technology used in Bitcoin mining. It is able to generate orders of magnitude more hashes per watt of power than the next best technology. For greater detail, please see the hardware page.

–pass z  (the actual value of this parameter is usually ignored by pools but oftentimes required by either the pool, mining program, or both. Can be set to something like “X” or “Z” unless your pool requires a specific password).

It can also help to check your equipment on different mining profitability websites. Sometimes the estimations vary so you can get a more accurate prediction by trying out different calculators. Some worth mentioning are:

Theres a few more things we need to do before we can start running the miner. First of all, we need to add this string of code to the config.txt, especially on 1-2GB video cards. This will ensure everything runs smoothly. Add this code to your config.txt file:

So get mining, folks! And for the less knowledgable I can warmly recommend cloud mining. But make sure you choose a reputable one that has been around a while. I just chose Genesis Mining based on research and they got good discounts every now and then, like right now there is a coupon code you can grab: 809fKo

Although Zcash is already a mature coin, it is still not coming close to the load and size of Bitcoin’s and Ethereum’s chains, so, in most cases, mining it is more profitable. In 2016 when Zcash came into the world, it was very profitable to mine it. Due to the fact that there were only 12 Zcash coins in circulation, the price went up to the astronomical price of 3000 Bitcoins for one Zcash coin!

Configure the mining software (usually via batch file) to point to your desired pool and mine to your wallet address, as well as any GPU specific options you may need (or want) to enable (if supported).

If all is looking good at this point, congratulations, you have successfully setup the EWBF miner and pointed it to a pool and are earning Zcash. After some time you can go to the Payouts tab to get a rough estimate of your expected income, but the numbers don’t really mean much until at least 24 hours of constant mining have gone by.

One Reply to ““invest in ethereum -lisk coin””

  1. You can also start mining process with your GPU. You can use claymore as it has a long standing reputation and optimized for miners. It helps improve the hashing rate and sometimes it takes time download and use. If you are going to use Genoil miner then it is going to work for pool mining and with AMD graphic cards.  The miner may charge 2.5% fee and the every hour miner mines for developer during 3 minutes.
    (ZEC) This is what happed to me. I lost one “Pending” payment, and that “Pending” last for at least 6hrs. When I woke up in the morning, that Pending was gone, no payment. I checked all the top miners, they have the same thing, I don’t know if they notice or not. Many times, the number for “Balance” freeze for couple hrs. I’m pretty confidence to say that, nanopool does steal coins. However, I tried flypool (steal hashes), and Dwarfpool, and turns out this pool is ok to mine.
    Once you have your batch file configured with your settings, it is time to test it out. Save and close the text editor and then double click on the batch file to run the program. If everything is running correctly you should get a screen similar to the one shown below:
    Dear Steven, I read that article. But there is a problem me. My graphic card is not related to the article. AMD or other. Therefore when I run the batch file. The error occurred. Error say. GPU card not found. Can i change the configuration data for my GVA (Intel Graphic)
    Bminer is a highly optimized Equihash miner that runs on modern NVIDIA GPUs (Maxwell and Pascal, i.e. GPUs that have compute capability 5.0 or above). Bminer is the fastest publicly available Equihash miners today. It features a completely restructured algorithm to maximize the stream processor occupancy and the instruction pipeline efficiency. It realizes the full potentials of Pascal GPU cards.

Leave a Reply

Your email address will not be published. Required fields are marked *