“investment management |zev technologies”

There are other Equihash coins you can mine, such as bitcoin gold, but this will be covered in another guide. This guide will focus on how to get your equipment mining Zcash. Before you start, always ensure that you have the latest appropriate drivers installed to ensure things go smoothly without crashing. Also note that almost all antivirus or anti-malware will pick this software up as malware.

We’ve been using Nanopool for our ETH mining rigs for over 4 months, and it works just fine. Dashboard is very clear and makes it easy for newbies like us to setup. Payments are released once or twice a day when every time we reach our ETH threshold. So far, no caomplaints whatsoever. Plus, they send you email notifications every time a rig stops mining for any reason.

If all is looking good at this point, congratulations, you have successfully setup the EWBF miner and pointed it to a pool and are earning Zcash. After some time you can go to the Payouts tab to get a rough estimate of your expected income, but the numbers don’t really mean much until at least 24 hours of constant mining have gone by.

Could someone help me out here. I’ve got a R280X that should run around 290 h/s on equihash. I runs great guns on Cryptonite 485 h/s but when I start Claymore Zen64 miner it starts out at 275 h/s and then starts to throttle back to 150 h/s. It drops my clock speed in half and I have no control over setting thru MSI afterburner. It mines along but at half the speed 500mhz.

I think I will end this guide at this point for now as it is getting to be quite long. While I originally intended to cover fine tuning and going over other optional arguments that the EWBF miner can use, I think I will wait and make this a two part guide. For now this Part 1 covers the basic setup and configuration of getting the EWBF miner running and shares being submitted to a pool. Since it will usually take some time before reaching a pools minimal payout period anyway, especially for just one or two cards, we have some time.

For this reason, miners started to work in groups, which are called pools. A pool of miners unites the calculation power of a workforce of small miners in order to obtain a significant mining power (aka hash rate), thus increasing the chance of solving a puzzle and getting the reward for it. Each miner in the pool, gets a “share” of the reward, according to the amount of power he contributed to the pool.

In the example above we’re mining on USA stratum pool. We have a quad-core CPU with hyper-threading (8 threads available) and only one NVIDIA GPU in the computer. We are mining with 6 threads on the CPU and on the whole NVIDIA GPU.

The miner still needs some work, especially on Nvidia GPUs where by default it is pretty heavy on the CPU load and memory usage as well. It is recommended that Nvidia users add the parameter –enable-nv-hotfix in order to reduce the CPU load a bit, but still running the miner on the main GPU may make the system a bit unresponsive even with that parameter. Still if you are interested in mining MNX (even with the high hashrate and low block reward at the moment) or any other Equihash 96/5 coin you might want check the lolMiner-mnx out.

Check FAQ if there is a problem. If your problem is not described there, please let us know by e-mail. Specify the detailed description of the problem in the message. Note: your account can help solve your problem quickly. if possible, attach logs.

The next step is to download the EWBF Miner. Only download miners from the official threads in BitcoinTalk. If you scroll down, you’ll see a couple of different download options. We’re going to use the Mega download link.

Zcash makes use of the Equihash algorithm – a Proof of Work algorithm that is unique to Zcash for now. It was invented by Alex Biryukov and Dmitry Khovratovich, and makes use of Wagner’s algorithm to provide the PoW that’s required for consensus in the Zcash Blockchain.

Unfortunately it’s currently written specifically for linux and uses direct OperatingSystem calls to be as fast as possible, to have very low cpu usage and to consume energy as little as possible. However if people are interested in a Windows version I’ll port it. First we have to check how it performs on something faster then a 750ti However my test are very promising.

At the beginning you could effectively mine Zcash with just a CPU, but due to advancements in software GPU’s have a huge advantage over CPU’s. You can still use a CPU to mine but your return will be very low, so all of the serious miners use GPU rigs. GPU miners will often fall into one of two camps:

Following the startup information. we can see we are getting block information from the pool and that our graphics card(s) are detected and being assigned new work. After a little bit you shoudl start seeing shares accepted messages indicating your GPU has found a solution, submitted it the the pool and it was accepted.

Tags: Equihash, Equihash miner, Equihash mining, Genesis Mining, Genesis Mining Zcash, Genesis Mining ZEC, HashFlare, HashFlare Equihash, HashFlare Zcash, HashFlare ZEC, Nicehash, Zcash, Zcash cloud mining, Zcash CPU miner, Zcash crypto, Zcash details, Zcash GPU miner, Zcash miner, Zcash mining, Zcash specifications, ZEC, ZEC cloud mining, ZEC CPU miner, ZEC crypto, ZEC details, ZEC GPU miner, ZEC miner, ZEC mining

Routinely during its operation the miner will also display useful information such as the GPU temperature(s), sol/s per card and total sol/s. The part highlighted in a table fashion is what was enabled by using the –pec flag above and displays a rough efficiency reading you can later use to help fine tune your settings.

Hey guys, thanks for the fantastic guide. I have a windows 10 system with two nvidia GPUs. One is gtx 960 and the other is gt 710. I am using escavator for mining zcash. I m getting 127 H/s if i use only my gtx 960 GPU. When i added the second GPU, escavator does not read it, ( windows does), still getting 127H/s. How do i increase this? Any ideas pls.

Cool story, but you do know, you can direct that miner which i linked to any pool you want to have it mine entirely foryourself??? nheqminer.exe -l eu1-zcash.flypool.org:3333 -u wallet.worker -t threadcountnumber.

For those who may be unfamiliar, Pascal is the code name for Nvidia’s latest micro-architecture which includes all GeForce 10 (10xx) series cards, such as the GTX 1050, GTX 1060, GTX 1070, GTX 1080, the Ti variants as well as Titian X and Xp cards. So basically the miner is optimized for Nvidia 10 series cards, but should still work with most Nvidia cards that have at least 1 GB of on-board memory and Compute 2.0 or higher capabilities.

If you have a Linux CUDA compute machine available we highly recommend using nvidia-docker. Installing different CUDA versions for Zcash mining and deep learning frameworks and managing versions can be painful. Using nvidia-docker you do not have to worry about that.

**link removed** As per your instructions (both on the printed and video instructions) when I went to “mega” (see above) and clicked, it brought me a list of about 15 items, each item that said “Zec Miner” with different dates on it. (I have a screen shot of the list but no where to upload it.) I picked the most recent date, which was the last item on the list, When I unpacked it to my desktop it still said “Zec Miner.” I went back an did a search for “EWBF ZEc Miner” on that same forum page with no… Read more »

Genoil’s latest ZECMiner is pretty much the fastest public OpenCL miner (Windows binaries only) for Zcash at the moment, though there are some stability issues with cards dropping to 0 Sol/s and the miner crashing. The situation improves with each new version, but the miner is still not that good stability wise. The latest Nheqminer supports OpenCL mining, but is slower than ZECMiner, even though stability wise it is better… it is much better for CPU and CUDA mining though. Hopefully soon there will be other faster GPU miners that will offer more stability and features along the improved mining speeds, but for now you will need to do with what is currently available.

Advantages: It does seem to be a bit less stressful on hardware — power usage is a bit lower. You can watch YouTube HD videos without chopping while Bminer works, and it will dial down hash rate to accommodate this. DSTM and EBWF usually make watching videos or working on spreadsheets uncomfortable to impossible.

However, if you have Nvidia cards, or if you’re in the market to buy new cards and can’t find any well-priced AMD cards, then mining Zcash on Nvidia GPUs is still very profitable with the EWBF Miner, which is highly optimized to get the maximum performance out of Nvidia’s Cuda cores.

Once your Trezor is setup, then the Trezor web wallet will display a list of addresses under the Receive tab (if I remember the tab’s name correctly, it’s something like “Receive”). Just select any address listed there and plug it into your mining pool / software as your payout address.

The biggest limitation of the official Zcash software is that it only takes advantage of your CPU to mine. If you have decided to build a dedicated GPU rig for mining the basic software will not be enough, you will need to decide on software that has been optimized to take advantage of your GPU’s.

Patrick has been running STH since 2009 and covers a wide variety of SME, SMB, and SOHO IT topics. Patrick is a consultant in the technology industry and has worked with numerous large hardware and storage vendors in the Silicon Valley. The goal of STH is simply to help users find some information about server, storage and networking, building blocks. If you have any helpful information please feel free to post on the forums.

The new Zcash (ZEC) cloud mining prices are the following after the last upgrade with 25% improvement in hashrate – 0.75 H/s for $29 USD, 7.5 H/s for $280 USD and 75 H/s for $2600 USD. These are up form 0.6 H/s, 6 H/s and 60 H/s for the same prices thanks to the hashrate improvement that apparently the company has achieved in their mining recently. Also don’t forget that you can use our special discount code during checkout to get 3% off the regular prices for Zcash mining hashrate, just enter CryptoMiningBlog5 as promo code during checkout to take advantage of the better price offer.

The world of cryptocurrencies is growing at an accelerated pace. The crypto market cap continues to grow with record breaking volumes. The basis for creating value in the crypto world is the mining process for major and veteran coins – with Bitcoin leading them.

hi, bminer also faster than other miner around 10-15%, but reject data it’s so high, i using on nicehash to mine, reject data around 3% to 5%, i will try direct to mining zecoin later and report of bminer.

Tags: Bminer, Bminer CUDA miner, Bminer Equihash miner, Bminer Nvidia miner, Bminer ZEC miner, CUDA equihash miner, cuda miner, Equihash miner, Nvidia Equihash miner, Nvidia Zcash miner, Nvidia ZEC miner, Zcash miner, ZEC miner

All of these calculations can change based on mining difficulty as well as Zcash price fluctuations. Here is a view of what 1 December 2016 to 20 May 2017 Zcash pricing looks like via Poloniex (one of the larger exchanges):

I have 1080 TI FE and instead of doing 8 USD/day – now am getting 3 USD/day with nicehash! doesn’t worth it’s effort working for now but i will keep it on for a while and will keep on watching. Hopefully!!

Quadro M5500, Quadro M5000M, Quadro M4000M, Quadro M3000M, Quadro M2000M, Quadro M1000M, Quadro M600M, Quadro K5100M, Quadro K5000M, Quadro K4100M, Quadro K4000M, Quadro K3100M, Quadro K2200M, Quadro K2100M, Quadro K3000M, Quadro K2000M, Quadro K1100M, Quadro K1000M, Quadro K620M, Quadro K610M, Quadro K510M, Quadro K500M, Quadro 5010M, Quadro 5000M, Quadro 4000M, Quadro 3000M, Quadro 2000M, Quadro 1000M

One Reply to ““investment management |zev technologies””

  1. It also ensures that information of transaction is verified by the miners.  It means that this digital currency provides selective transparency and privacy of transaction.  The payment of Zcash may be published publicly on public block chain but the transaction amount, recipient, sender may remain private.
    GPU   Graphical Processing Unit, a GPU (or commonly just referred to as a graphics card) was previously the dominant way of Bitcoin mining. It was way beyond the efficiency of a CPU and plenty common among computer users to gain widespread adoption. With the increase in the difficulty it has recently become too inefficient for most to continue mining with GPUs as their electric bills now compete with the value they generate. For futher details, please see our hardware page.
    A: The miner uses adaptive intensity and tries to use the maximum intensity value, with the help of the –intensity option you can set a limit on the maximum intensity, this will slightly reduce gpu usage and performance. Allowed values 1 – 64. You can set different values for each cards –intensity 64 64 64 64

Leave a Reply

Your email address will not be published. Required fields are marked *