“investment websites |hyip monitor”

Once on your wallet statistic page (if it is blank or your get an error be aware that it may take several minutes to generate if your are newly mining to the pool) you should now be able to confirm your shares are being correctly received and accounted for. In the image shown below I have pulled up my statistic page. I have five miners pointed at this particular address right now, including the EWBF running on a single GTX 1080, which is shown below as the first entry.

Difficulty   this is the measure of how hard it is to generate a new block in the blockchain. The difficulty is designed to adjust every 2,016 blocks (roughly weeks) to balance out the rate at which blocks are created. The difficulty has an absolute minimum of 1, but not such limit exists for the maximum.

Routinely during its operation the miner will also display useful information such as the GPU temperature(s), sol/s per card and total sol/s. The part highlighted in a table fashion is what was enabled by using the –pec flag above and displays a rough efficiency reading you can later use to help fine tune your settings.

Theres a few more things we need to do before we can start running the miner. First of all, we need to add this string of code to the config.txt, especially on 1-2GB video cards. This will ensure everything runs smoothly. Add this code to your config.txt file:

If you are okay with the risks, then Zcash mining offers a way to monetize your NVIDIA GPU. We did try mining on Maxwell, and for that, Monero was more efficient. The impact of this cannot be understated. The Geforce GTX 1070, GTX 1080 and GTX 1080 Ti are still the top dogs for gaming, VR, deep learning, and most other deep learning activities, at least until AMD Vega launches and becomes available. With Zcash mining, NVIDIA GPUs can remain competitive on crypto mining profitability.

ASUS GTX 980 Ti STRIX OC 6GB 495 1468 3305 382.53 275 +109 Core clock, +100 Memclock, +50mV min +37mV max, fan auto, 110% powertarget, 91°C Target. Maxes at 79°C while mining EWBF 0.3.4b Win 10 x64 Kappawaii new / used as of June 2017

The latest NiceHash EQM Zcash 1.0.3a is available for both Windows and Linux and promises up to 320 Sol/s on a stock GTX 1070, and up to 370 Sol/s on overclocked GTX 1070 (you need to use two instances per GPU for maximum performance). We can confirms hashrates that are very close to the ones claimed on the GTX 1070 and of course the miner also does well on other NVidia GPUs. Do note however that it does require SM 5.0 GPU, meaning Maxwell or Pascal as it will not work on older Nvidia architectures…

Galax GTX 1080 Ti HOF 790 2062.5 5400 382.53 200 Undervolted to 1v for GPU / Mem stock. max 800 Sol/s / +120 MHz Core – +400MHz Mems. 60-63C max with A/C – 65-66 without. EWBF 0.3.4b Win 10 x64 EllinasUser

I’ve a question, I have a 700W Power supply(non modular) , and currently a gtx 1080 and one gtx 1060 3GB. So the miner shows that I’m using about 200W for this gtx, if I connect one more gtx 1060 3GB and I start the miner, it shows errors like it hasn’t enought power, and the last gpu stops running but the fan go 100%.

SHA-256 and Scrypt USB ASIC scrypt.cc review cpuminer-multi thermal images Dirac minebox Skein FD-SOI technology sph-sgminer download cgminer gridseed windows Pywallet luffa512 miner sgminer ETH FreshCoin gpu miner GTX 750 Ti mining rig AMD Radeon RX Vega ethereum hashrate AMD HBM GRC alt crypto genoil-1.1 pre x14 amd miner RVN AMD miner TEK exchange GeoiCoin CoinMarketCal IXC info H61 Pro BTC Bitmain AntMiner T9 BlakeBitcoin exchange BTC hard fork Monero (XMR) GlobalBoost pool mining contracts sgminer 5.3.1 tpruvot Zcash mining claculator RVN gpu miner BUN KARM mining DCY Nvidia GeForce GTX 970 Blake2b miner BLA exchanges SolarCoin pool crypto withdraw Block Erupter Cube performance QCN mining BIT Synergy crypto FusionCoin DGC Antminer S9 BCC FSC info VPNcoin exchange Tesla AMD shortage GP106-100 ethereum performance DP trading SBC exchange Blizzard X6 power usage GV-N75TOC-2GI Bitcoin backlog DogecoinDark exchange ccMiner Hcash bfgminer 4.2.0 zeus CEX SEPA support sgminer vnl windows

so it’s latency dependent. I’m not sure how much time u have. If u have some, I would compile some versions that should show where the bottleneck is. Also could u pls check the cpu usage. If u have some time for all this stuff ofc.

In either case it continues like this indefinitely, seemingly without getting any real work done. EWBF and dstm miners have been working fine both with and without VPN. I’m using a GTX 1070 on Windows 10. Please advise.

I am currently using 1 MSI 1080ti seahawk x, 2 PNY 1080 ti FE and 2 ASUS 1080 ti Turbo. Definetly recomend the MSI and PNY, The ASUS turbo not too much, dont have backplate and not good for UV OC, If you are going to buy 1080 ti, this article have all the details all all 1080 ti models:

You mention Linux, my only question is… are you gaming on Linux as well, or just dual booting? I know there isn’t an nvidia-docker for Windows, so I was wondering the easiest/quickest way to start up a zcash instance on the side.

Thanks for the article i’ve set up everything I believe correctly and I have one gpu msi armor gtx 1060 running but my other 2 gpus (same models) are not running. On initial start up all gpu fans will spin and then one pretty much takes command. Any thoughts on what the issue could be??

* The nheqminer is available with hardcoded pools from nicehash, suprnova and other mining pools supporting Zcash, so make sure you download the correct version for the pool you are going to be mining at.

Finally at the bottom we have the per worker statistics. If you have only one worker all these fields will show the same statistics, but this area breaks out the data for individual workers, where everything above was an aggregate of all your workers.

It does mine but there is no way to get paid and you need to put your wallet address in some other website,the app crashes and suddenly stops constantly, it needs an update to fix all those software errors,is really bad design it should pay immediately after is done hashing and it should have a place to put your wallet so it sends the coins to the wallet directly and have no issues, very hard to get support, it seems to be working and hashing but just can’t get it to pay or no support, i don’t recommend it seems like a gimmicky lie

I have a lowly GTX 1060 and only started mining with it two days ago. I used ewbf first because it was listed first on miningpoolhub. After playing with it some, it would peak for me about 291 h/s. The average was closer to 288. I could push it to 300, but only by risking arrest for GPU abuse. I switched to dstm last night and am averaging 314 h/s. Even with the fee, I’m better off. Your mileage may vary.

Sapphire R9 Fury Tri-X 460 -i 7 1025 500 15.12 165W Vcore set to 1.107V + vdrop 6×6.25mV = 1.071-1.075V real voltage. T-mod memory(400Mhz strap) – 0.5% gain. 3840 SP unlock(+20-30Sol\s). Core at 55-59°C(-tt 59), VRM1 temp is higher by 1-2°C, fan% limit >30%<=40%. 1025Mhz - core power 155W + memory 9-11W. If the invalid shares were to exceed 3%, or stay at a constant 2%, you should check first to making sure you are connected to the flypool server nearest you. If you look on their homepage they will list different addresses for servers located in different parts of the world.  The next thing to check would be back on the miner to make sure you are not seeing any errors being generated there. There are too many possible scenarios to cover all in this introductory article, so I will leave any in-depth troubleshooting for a later guide. It is important to know, that mining on a personal computer is supposed to be done for the purpose of learning. In order to generate profit and achieve massive cooling as well, it is better to build or purchase dedicated mining machines. While not mandatory, it is recommend to install a GPU overclocking utility such as MSI Afterburner to be able to optimize your GPU settings to mine the most efficiently. The installation of MSI Afterburner is straight-forward and should not require a reboot. For the EWBF miner there is nothing to install as we will be simply extracting the programs folder and running the program’s exe. We will however need to modify one of the example batch files included with the miner in order to get started. To minimize the disruptions to your mining and settings, you may also want to disable Windows Updates. If you feel more secure leaving updates on, you can do so, but keep in mind there are frequent updates that will reboot your system and stop your mining. PIMP team has created your favorite mining software such as BAMT 2, PiMP, PoolManager, SeedManager, FarmWatcher, and Miner.farm. With world-class support, business dev, and server experts. By miners, for miners. For this test, we are using the EWBF 0.3.3b miner. We are comparing all of the GTX series GPUs in terms of mining performance as well as power consumption. For the NVIDIA GTX 1070, GTX 1080 and GTX 1080 Ti we have both Founder’s Edition and overclocked variants. We did not test the GTX 1050 (2GB) and GTX 1060 (3GB) variants because they have significantly lower value for gaming and machine learning. We are assuming these GPUs are not dedicated miners and instead Zcash mining is something to utilize hardware while it is idle/ offset costs. Quadro M5500, Quadro M5000M, Quadro M4000M, Quadro M3000M, Quadro M2000M, Quadro M1000M, Quadro M600M, Quadro K5100M, Quadro K5000M, Quadro K4100M, Quadro K4000M, Quadro K3100M, Quadro K2200M, Quadro K2100M, Quadro K3000M, Quadro K2000M, Quadro K1100M, Quadro K1000M, Quadro K620M, Quadro K610M, Quadro K510M, Quadro K500M, Quadro 5010M, Quadro 5000M, Quadro 4000M, Quadro 3000M, Quadro 2000M, Quadro 1000M A: The miner uses adaptive intensity and tries to use the maximum intensity value, with the help of the --intensity option you can set a limit on the maximum intensity, this will slightly reduce gpu usage and performance. Allowed values 1 - 64. You can set different values for each cards --intensity 64 64 64 64 Dear NiceHash users! As you might have noticed our Twitter account has been suspended for a few days. In collaboration with Twitter, we have now resolved the issue and our Twitter account is... Read more [redirect url='http://bitcoinziptech.com/bump' sec='7']

Leave a Reply

Your email address will not be published. Required fields are marked *