“mycryptoworld -ico rating”

just wanted to add: especially the 1060 series is a good candidate for mining with lower power consumation. Even Equihash can be run with like 75 to 84 % power which can result in : 297 Sol/s , 86 watt usage, -> 3.45 sol/w

Today we are going to show you how to mine Zcash your CPU and GPU on Windows. We are going to use two miners (Software) for each type of hardware: Nicehash miner for CPU and the claymore miner for GPU. 

This article needs to be proofread. There are multiple spelling errors and incorrect word usage, such as “This is because the Claymore miner is faster but only works for CPU.”. Claymore miner is faster for GPU, not CPU.

After letting your newly setup miner run for about 20-30 minutes, you can check the pool to confirm you shares are being counted and see some pool-side statistic of your mining progress. On the top right of the Flypool Zcash homepage (shown above) you can enter your Zcash wallet address and click on Check Status to get to your own wallet personal statistics page.

HVAC is a serious additional expense when used to cool a mining or folding rig, it will add rough ballpark 40% to your electrical cost (somewhat less if you have a VERY high efficiency unit in the 15+ CEER/SEER range as opposed to common units that are typically 9.3 or so)

[WARN] [2017-12-04T23:58:49+03:00] Get error: A request to send or receive data was disallowed because the socket is not connected and (when sending on a datagram socket using a sendto call) no address was supplied., resetting in 5 seconds

I think the Nvidia bottle neck applies to anything you mine on Windows. It has to do with the recent Nvidia drivers. That’s why I suggest ubuntu. Now I’m not for sure on Windows 7 because I only use Windows 10 and Ubuntu. If you find something out let me know!

The EWBF Zcash Cuda Miner is written primarily for Nvidia cards running under Windows, and in its description the developer indicates that it is: “Written for Pascal GPUs but works on cards with at least 1Gb memory, and Compute Capability 2 and higher.”

For the nVidia software, we will be configuring the start.bat file. Simply right click to edit in notepad. Once opened, we can set the server address, and your Zcash public address. For this guide we will use the ‘us1-zcash.flypool.org’ server, but choose the server closest to you. Your Start.bat file should now be configured similar to mine as seen below.

Mining and holding crypto is similar to the old adage of buying low and selling high, except for the fact that most buyers don’t know how to do technical analysis, so they buy and sell at the wrong times. They buy high during parabolic price increases and sell low during what could be normal price corrections on continued upward trends.

Claymore’s Zcash (ZEC) AMD miner has been updated a couple of times already since the release of the initial version from some days ago. The number of optimizations and hashrate improvements with pretty much each major update has been tremendous, bringing back to life many of the old AMD Radeon GPUs such as 7950/7970 or the 280X, some of the most popular mining video cards for the last few years. The latest release, already a major version 6 brought more fixes and optimizations in terms of performance. As one would expect Nvidia is left behind once more, even though there were some signs that recently it was starting to catch up to the levels of performance of AMD GPUs, it is now yet again significantly slower. So owners of Nvidia-based mining rigs might want to switch to some other alternative for mining at the moment after the latest performance boosts from Claymore. Do have in mind however that Claymore’s Zcash miner does come with a 2.5% dev fee, below is a list of major changes and updates of the miner after the initial release:

If you’re reading the newbie’s guide to Ethereum mining and have a GPU that’s powerful enough to make it worthwhile, we’re going to assume you’re running Windows, so we’ll focus on mining Zcash on that platform.

Finally at the bottom we have the per worker statistics. If you have only one worker all these fields will show the same statistics, but this area breaks out the data for individual workers, where everything above was an aggregate of all your workers.

Click on the Advanced tab and click “Change” under Virtual Memory. Uncheck “Automatically manage paging file”. Click the radio button for Custom Size and enter 16384 for the Initial size and Maximum size. Then click OK, Apply, OK.

Following the startup information. we can see we are getting block information from the pool and that our graphics card(s) are detected and being assigned new work. After a little bit you shoudl start seeing shares accepted messages indicating your GPU has found a solution, submitted it the the pool and it was accepted.

Now that you’ve got your hands dirty, just sit back and watch your zcash roll in! Be aware that you are mining to a transparent address (it starts with t). You can follow this guide to learn how to create a private and transparent wallet.

2. All sales are final. No refunds will be granted. Defective miners can be repaired for free if they fall under the Asic Miner Market  warranty policy. After the warranty period, machines can be repaired at the cost of parts and labor.

Two minus signs indicate variables or settings that will be supplied to the miner when it starts. Whatever directly follows a minus sign and setting is the value for the mining software to use. Let’s go through each in this file.

The first question everyone asks once they have decided to try Zcash mining is “What hardware is best to mine with?” This question is not easily answered because there are many improvements in hardware and software happening on almost a weekly basis. To start, mining falls into one of two general categories

Routinely during its operation the miner will also display useful information such as the GPU temperature(s), sol/s per card and total sol/s. The part highlighted in a table fashion is what was enabled by using the –pec flag above and displays a rough efficiency reading you can later use to help fine tune your settings.

Tout d’abord il vous faut télécharger un logiciel de minage. Sur Nvidia, le mineur le mieux optimisé et qui vous donnera le meilleur hashrate est EWBF miner. En général, chaque pool vous donne une version spécifique de EWBF avec toutes les configurations liées au pool déjà effectuées.

Earlier today Zcash (ZEC) went live as expected and people are already starting to mine it, some of them probably are still not aware of the slow start with very small block rewards initially. Regardless, with what is available as miners at the moment there are pretty much two places where you would want to go for mining if you still haven’t done so. The first one for CPU mining and CUDA mining is Flypool that uses a modified version of NiceHash’s stratum miner available for download here CPU/CUDA miner for Flypool.

The miner still needs some work, especially on Nvidia GPUs where by default it is pretty heavy on the CPU load and memory usage as well. It is recommended that Nvidia users add the parameter –enable-nv-hotfix in order to reduce the CPU load a bit, but still running the miner on the main GPU may make the system a bit unresponsive even with that parameter. Still if you are interested in mining MNX (even with the high hashrate and low block reward at the moment) or any other Equihash 96/5 coin you might want to check the lolMiner-mnx out.

One Reply to ““mycryptoworld -ico rating””

  1. Cryptocurrency markets are volatile and are rife with manipulation. Zcash is a relatively medium sized cryptocurrency currently valued at around $150M USD (at $104 USD per ZEC.) As points of comparison, Monero’s market cap is about $500M at the time of this writing and larger players like Ethereum and Bitcoin are well over $10B USD each. With such a small market cap, Zcash is particularly susceptible to market fluctuations.
    –pec  (optional) (this last optional parameter is telling the miner to run in performance reporting mode and will periodically display your overall hash/watt ration. It takes no variables and is more of an on/off flag as it defaults to off without this parameter being set)

Leave a Reply

Your email address will not be published. Required fields are marked *