“smartinvestment _investment securities”

You need to take in to consideration the system which requires another 100w. 1080 with 80 percent power and 2 1060 also at 80 percent power should be fine. If it doesn’t work try to reduce power further to 75 percent. I have my 1080s set to 70 percent power.

The only drawback is that the miner currently only supports connection to NiceHash, so you cannot use it with other pools. While this might nit be bad during the slow start of ZEC mining, after that you might still want to go for mining and keeping Zcash instead of immediately selling it for profit. Hopefully in the next few weeks we are also going to see more development happening for Nvidia users and that goes not only for Linux, but for Windows users as well.

hi, bminer also faster than other miner around 10-15%, but reject data it’s so high, i using on nicehash to mine, reject data around 3% to 5%, i will try direct to mining zecoin later and report of bminer.

Ah, I see. Malware seem to be a huge problem on this forum. I took a look for a description to setup a VM quickly. It seems it not that easy. PCI/GPU-Passthrough seems to be very hardware dependent not that easy to setup. I’ve really no good idea how to provide security for you, without opening the source. Well I guess someone has to try it out and report. Sry, but I have no better ideas for this.

Troubleshooting tip:  Some miners have had success installing all GPUs at once, then installing the drivers. Others prefer to install only one card, install the drivers, shut down the system, and then install the rest of the GPUs.

Click to flag and open «Comment Reporting» form. You can choose reporting category and send message to website administrator. Admins may or may not choose to remove the comment or block the author. And please don’t worry, your report will be anonymous.

The card should have at least 1 GB of RAM, or it won’t be able to properly mine Zcash. This is a correction from the video, as EWBF supports GPUs with just 1 GB of RAM, compared to Ethereum’s 3 GB requirement. However, many older cards may not be energy efficient enough to turn a profit, so check on whattomine.com by entering your card’s info.

From a security minded engineer: How can I trust someone sharing Windows executable via Google Drive and using WinRar? The guide is nice but it raises lots of security concerns. There’s no auditable open source code and stamp by security experts. Not long ago we had WannaCry spreading in the wild.

Zcash, a privacy centered cryptocurrency, made a mark in the mining scene by use of its ‘Equihash’ Proof of Work mining algorithm. The algorithm distinguishes itself from others with its focus on memory. In short, to mine Zcash, you’ll likely need more memory than what you’d need for other cryptocurrencies. But don’t worry, Zcash’s whopping $350+ USD trading value gives you enough incentive to get started.

Keep in mind that your profitability will depend mostly on your electricity and internet costs. As such, it’s common to find large mining operations close to power plants, as those ventures tend to strike up B2B rates with the plants themselves to ensure profitability. But don’t worry, it’s likely that your conditions could lead to a reasonable ROI (Return on Investment) as well. Just make sure to calculate the ins and outs of your situation before you make a sizable investment.

Could u please run another test. Set your cpu-governor to performance mode this time. The miner is highly multithreaded. Since it scales so bad compared to a 1070 – it could be due to scheduling latencies. So if u have some time pls test with cpu-scaling governor set to performance.

First, head over to whattomine.com, which provides up-to-date figures for current prices, block times, and network hashrates (as measured in megahashes per second, or MH/s, denoting millions of calculations per second).

Zcash is a fork of Bitcoin protocol, a currency that brings some major privacy improvements to its clients. A unique zero-knowledge proving technology makes it possible to shield some transaction details from prying eyes, like the sender, receiver and transaction amount. The currency has a strong developers and investors team. 10% of all Zcash tokens to ever be mined are allocated for the employees and shareholders, which is a strong stimulus for them to take good care of the network and ensure its further development and propagation.

The first question everyone asks once they have decided to try Zcash mining is “What hardware is best to mine with?” This question is not easily answered because there are many improvements in hardware and software happening on almost a weekly basis. To start, mining falls into one of two general categories

For me, i’ll select the US server as shown. Make sure to also include the port number. In the config.txt, I will insert ‘-zpool us1-zcash.flypool.org:3333’. Simply add your Zcash wallet to the wallet section by adding ‘-zwal YOUR_WALLET_ADDRESS’.

I was skeptical so I have tested myself. This miner is faster than dstm on my rigs by ~2%. The difference is small though. Here is the post I have in bitcointalk, with all screenshots and all my mining logs.

We wanted to investigate whether buying overclocked cards was worth it for mining. If you are buying these cards and using them out of the box in Linux (for machine learning) then you do not have access to the nice Windows overclocking tools. Also, crypto mining generates 24×7 load so some of the aftermarket cooling solutions on the overclocked cards can be extremely advantageous. One other point to note is that larger cards like the ASUS STRIX models have PCB and coolers that rise well beyond the PCIe slots. That should be a consideration if you are thinking about these systems in rackmount enclosures.

Ok, maintenant on va s’attaquer au vif du sujet ! dans ce vrai premier tutoriel, on va voir comment miner sur l’algorithme equihash avec un GPU Nvidia. Dans une première partie nous verrons la configuration du mineur et dans une seconde partie, nous verrons comment optimiser le mining (overclock).

Theres a few more things we need to do before we can start running the miner. First of all, we need to add this string of code to the config.txt, especially on 1-2GB video cards. This will ensure everything runs smoothly. Add this code to your config.txt file:

Not Tech Savvy? No problem – we’ve got live support on our 800 number available Monday-Friday 9am to 5pm to help keep you mining. Got a problem that we’re not able to coach you through over the phone? We’ve got you covered – Freedom Miner has a remote desktop application built in and with a couple of clicks you can authorize one of our engineers to access your rig and make the repair remotely.

One Reply to ““smartinvestment _investment securities””

  1. After creating an account you’ll need to setup a worker to help keep track of your mining progress, to do this use the link below and add a new worker to your account called worker1 and set the password as x. (or use details as you see fit)
    Nicehash Zcash minerSilentArmy Zcash minerClaymore’s Zcash AMD GPU minerEthminerGenoilClaymore CryptoNote GPU MinerClaymore CryptoNote Windows CPU Minerccminer-cryptonightCPUMiner-MultiYam minerEWBF Cuda BTG minerClaymore’s BTG AMD GPU miner
    All of these calculations can change based on mining difficulty as well as Zcash price fluctuations. Here is a view of what 1 December 2016 to 20 May 2017 Zcash pricing looks like via Poloniex (one of the larger exchanges):

Comments are closed.