“what is blockchain |equihash miner”

Genoil’s latest ZECMiner is pretty much the fastest public OpenCL miner (Windows binaries only) for Zcash at the moment, though there are some stability issues with cards dropping to 0 Sol/s and the miner crashing. The situation improves with each new version, but the miner is still not that good stability wise. The latest Nheqminer supports OpenCL mining, but is slower than ZECMiner, even though stability wise it is better… it is much better for CPU and CUDA mining though. Hopefully soon there will be other faster GPU miners that will offer more stability and features along the improved mining speeds, but for now you will need to do with what is currently available.

Covering these steps more in detail, to get started mining Zcash with EWBF you will need a Windows based PC (or mining rig) and a late generation Nvidia GPU, preferably a GTX10xx series such as the GTX 1080 that I will be using.

Recommendations and Information found on Cryptopotato are those of writers quoted. It does not represent the opinions of Cryptopotato on whether to buy, sell or hold any investments. Investors should be cautious about any recommendations given. All investors are advised to conduct their own independent research into individual coins before making a purchase decision. Use information at your own risk.

Once your Trezor is setup, then the Trezor web wallet will display a list of addresses under the Receive tab (if I remember the tab’s name correctly, it’s something like “Receive”). Just select any address listed there and plug it into your mining pool / software as your payout address.

I briefly mentioned it while reviewing the EVGA GTX1080 card, but I thought I would take time to go over EWBF’s Zcash Cuda Miner in more detail and help anyone unfamiliar with the program or mining in general to get setup and running quickly with it under Windows.

Tout d’abord il vous faut télécharger un logiciel de minage. Sur Nvidia, le mineur le mieux optimisé et qui vous donnera le meilleur hashrate est EWBF miner. En général, chaque pool vous donne une version spécifique de EWBF avec toutes les configurations liées au pool déjà effectuées.

Check out Mining Pool Hub and the MultiPoolMiner they link to on their site. You can do CPU mining with it. It will benchmark several different miner applications and automatically switch to mining the most profitable coin. You can also select to be paid BTC/ETH/etc.

When the mining software was first released the developer also claimed that he: “Expected speeds (of) 435 sols/s (with a) GTX 1070 (and) 295 (sol/s with a) GTX 1060 6G (running under) Stock settings.” I believe things have improved since the first version with users reporting speeds of over XXX***XXX with a GTX 1070, and my own results of up to 560 sol/s with a GTX 1080.

Hi.. Need some help.. I have [HP Pavilion Notebook 15-ab055tx](https://support.hp.com/my-en/document/c04 731184) with NVIDIA GeForce 940M (2 GB DDR3L dedicated) Graphics…Do you think it’s possible mining Zcash In this laptop..

Ah, I see. Malware seem to be a huge problem on this forum. I took a look for a description to setup a VM quickly. It seems it not that easy. PCI/GPU-Passthrough seems to be very hardware dependent – not that easy to setup. I’ve really no good idea how to provide security for you, without opening the source. Well I guess someone has to try it out and report. Sry, but I have no better ideas for this.

The miner still needs some work, especially on Nvidia GPUs where by default it is pretty heavy on the CPU load and memory usage as well. It is recommended that Nvidia users add the parameter –enable-nv-hotfix in order to reduce the CPU load a bit, but still running the miner on the main GPU may make the system a bit unresponsive even with that parameter. Still if you are interested in mining MNX (even with the high hashrate and low block reward at the moment) or any other Equihash 96/5 coin you might want to check the lolMiner-mnx out.

In order to mine using this guide, there are two things that you’ll need. The first is a wallet to store your funds. There are currently multiple GUI wallets available and you can compare them here. You can also use this guide to learn how to install one of them on Linux. It is also possible to use an exchange as a wallet but we do not recommend it.

Difficulty   this is the measure of how hard it is to generate a new block in the blockchain. The difficulty is designed to adjust every 2,016 blocks (roughly 2 weeks) to balance out the rate at which blocks are created. The difficulty has an absolute minimum of 1, but not such limit exists for the maximum.

Click on the Advanced tab and click “Change” under Virtual Memory. Uncheck “Automatically manage paging file”. Click the radio button for Custom Size and enter 16384 for the Initial size and Maximum size. Then click OK, Apply, OK.

Run with ‘-h’ parameter to learn possible commands. By default, miner uses all CPU cores and no CUDA devices. You need to explicitly enable CUDA devices (setting ‘-cd’ parameter). If you wish to mine only with CUDA and no CPU, set ‘-t 0’.

One Reply to ““what is blockchain |equihash miner””

  1. Claymore has updated his ZCash AMD GPU miner to version 12.5 adding support for the ZCash forks (altcoins using the same Equihash algorithm) as well as doing some more improvements to the miner. The latest version comes with improved fans management for latest drivers and Polaris cards, added shares-per-GPU statistics when “s” key is pressed, addend an option to use a password for remote monitoring as well as included EthMan v3.0 which supports passwords and email notifications. This is currently the preferred solution by most miners mining ZEC or other coins based on the Equihash algorithm for AMD OpenCL GPU mining rigs, the miner does not yet have support for Nvidia GPUs. Nvidia miners can go for some of the available options for CUDA mining such as the nheqminer, excavator or EWBF’s CUDA Zcash miner for mining coins using the Equihash algorithm on their hardware.
    As you can see, Flypool offers quite a bit of information on your progress. At the top we have Hashrates which show your current (2 hour) and long term (24 hour) average hash-rates, your Immature Balance (which is simply the coins not yet fully confirmed on the network), Unpaid Balance which is you confirmed coins waiting to be paid once you reach the payment threshold, number of active workers, and a summary of submitted shares in the form of valid/invalid.
    Pro tip: check out the following GPUs: Nvidia’s GTX 1060-6GB/1070/1080 Series; AMD’s RX 470/480, RX 570/580, R9 Series, or HD 7990/7950 (if used cards are available, try to get them from a gamer instead of a miner, with a warranty if possible). As with everything, do your own due diligence to evaluate GPUs based on their hashrates, power requirements, availability, and price.
    I would recommend EWBF miner for Zcash, but Claymore dual mining is just as good. Just in case anyone doesn’t know you can dual mine any coin you want, your not limited to just ETH and Decred or ETH and SIA. Just need to read the “Read Me” Text doc in your miners folder. I made a short explanation video, mind you I am not a top end Content creator… but should help..

Comments are closed.