“zcash mining calculator _zcash”

I’m not sure about your version of Windows but in mine, Task Manager does not display any info on the status of the graphics card. All I see is the performance of my CPU cores, memory and networking throughput.

For those with inexpensive power, this is not an issue. For those with expensive power, it can be the largest recurring cost for Zcash mining. Using our power consumption and hash rate data, here is what profit per day looks like with $0.10/ kWh, $0.20/ kWh and $0.40/ kWh power:

Advantages: It does seem to be a bit less stressful on hardware — power usage is a bit lower. You can watch YouTube HD videos without chopping while Bminer works, and it will dial down hash rate to accommodate this. DSTM and EBWF usually make watching videos or working on spreadsheets to impossible.

There are many risks when it comes to Zcash mining on your NVIDIA Pascal desktop GPU. First, Zcash pricing can be unpredictable. We have seen major drops in value before (depicted above.) One also needs to be able to convert Zcash to standard currency which may incur transaction fees and/ or be difficult.

For the purpose of this guide, we’re going to do a detailed walk-through of setting up and using the very popular Nvidia EWBF Miner. If you have AMD cards, mining Ethereum is usually your most profitable option.

Mining and holding crypto is similar to the old adage of buying low and selling high, except for the fact that most buyers don’t know how to do technical analysis, so they buy and sell at the wrong times. They buy high during parabolic price increases and sell low during what could be normal price corrections on continued upward trends.

Following the startup information. we can see we are getting block information from the pool and that our graphics card(s) are detected and being assigned new work. After a little bit you shoudl start seeing shares accepted messages indicating your GPU has found a solution, submitted it the the pool and it was accepted.

Zcash makes use of the Equihash algorithm – a Proof of Work algorithm that is unique to Zcash for now. It was invented by Alex Biryukov and Dmitry Khovratovich, and makes use of Wagner’s algorithm to provide the PoW that’s required for consensus in the Zcash Blockchain.

Maintenant, il ne vous reste plus qu’à créer un wallet et à se connecter au pool. Pour cela, allez dans le dossier de EWBF puis faites un clic droit sur start.bat (pour Windows) cliquez sur modifier et rentrez les paramètres suivants s’ils n’ont pas été rentrés par votre pool : –server « votre pool » –port « port du pool » –user « votre wallet ». « Votre nom de worker » –pass « mot de passe du pool (souvent vide) » –pec (afficher la consommation) –fee « mettez 0 si vous ne voulez pas avoir de frais des développeurs de EWBF (à 2% de base) »

Once you have decided to start mining Zcash and have a good idea of what Hardware you want to use the next step is to find the right Software. There are several types of software that work with different hardware configurations including the official Zcash miner.

If you have a Linux CUDA compute machine available we highly recommend using nvidia-docker. Installing different CUDA versions for Zcash mining and deep learning frameworks and managing versions can be painful. Using nvidia-docker you do not have to worry about that.

I use the MSI GTX 1080 TI AERO. These cards are the best in performance and cooling. They have from to back airflow that keep these cards cooler than most. Note: Do not buy the Gigabyte version of these. They have firmware issues and crash.

You will need to pick a pool that supports Zcash. Some of the more popular pools include Flypool, Nanopool, Nicehash, Suprnova among others. You can get a more detailed up-to-date list by searching Google for “Zcash mining pools”. For this guide I will be using the Flypool Zcash mining pool.

One of my GPUs is throwing out a constant stream of “GPU #2 returned incorrect data!” errors. It’s a rig with 4x 7950s running at stock speeds (925 MHz GPU clock, 1250 MHz Mem clock) and all are running below 70C with fan speeds set at 85%. Most people with this issue seem to have much higher temps or big overclocks. Also, adjusting the intensity does not help. Has anyone else run into this or managed to fix it?

The good news is that getting started with Zcash mining is very simple. You don’t need to download the full Zcash blockchain or manage clunky command-line miners with manual instructions; you can mine directly to an exchange or to a hardware wallet such as Trezor or Ledger Nano S. Of course, you should always do your due diligence to ensure your coins will be properly supported before sending them anywhere.

When the mining software was first released the developer also claimed that he: “Expected speeds (of) 435 sols/s (with a) GTX 1070 (and) 295 (sol/s with a) GTX 1060 6G (running under) Stock settings.” I believe things have improved since the first version with users reporting speeds of over XXX***XXX with a GTX 1070, and my own results of up to 560 sol/s with a GTX 1080.

ccminer lyra2re download MtGox gone hodlminer source LTC halving 5-chip Dual Miner litecoin gpu miner GAW Qubit ASIC Compute 2.1 whirlpool miner download Halley GHS G-Blade voltage mod ccMiner 1.4.7.SP AMD GPU miner cgminer gridseed windows Brave BTC wallet BTC38 LDC info Mining Edition video cards USDE mining coin control qt wallet Steem windows miner Antminer X3 ASIC Bitcon ASIC efficiency sweet spot Ethereum prfoitability BET info Poloniex increase power limit cryptomaps Hashie problem DragonMint B29 ZEC mining claculator ccMiner LuxCoin panic sale GENE info X14 rent gpu mining frame NOC info ASUS Mining RX 470 Bitstamp Gold Bitcoin ASIC power usage Bitcoin Gold exchange FSP crypto mining Ronpaulcoin pools NYDFS BitLicense XMOS ETH Polaris 20 X14 hashrate SummerCoin V2 Steem mining guide Neocoin pools Blakecoin Nvidia bfgminer 4.0.0 Gridseed Bitmain BM1360 X11-Gost NiceHash Quark info Vega mining Dirac Blake-256 MEOW trading cgminer 3.7.8 neoscrypt windows ccminer hashrate test Bitcoin Index X11 ASIC miners Ethereum solo mining proxy XCN miner

Using this miner is easy but you have to specify the number of cores you have for better performance.  You should check your CPU count by opening task manager.  The nicehash miner has 2 versions and comes with it. One version is to get paid in BT C and another in Zcash. Now open the nheqminer_zcash” file now you can start mining with CPU and paste the command given below:

Here you can find the submissions to the challenge, along with link to the code hosted on GitHub. Not all submissions received are listed here. If a submission does not appear to include any Equihash code, then it is not published here and was not considered for judgment unless there was code added before the deadline. Submissions are listed in no particular order.

The new Zcash (ZEC) cloud mining prices are the following after the last upgrade with 25% improvement in hashrate – 0.75 H/s for $29 USD, 7.5 H/s for $280 USD and 75 H/s for $2600 USD. These are up form 0.6 H/s, 6 H/s and 60 H/s for the same prices thanks to the hashrate improvement that apparently the company has achieved in their mining recently. Also don’t forget that you can use our special discount code during checkout to get 3% off the regular prices for Zcash mining hashrate, just enter CryptoMiningBlog5 as promo code during checkout to take advantage of the better price offer.

In the example above we’re mining on USA stratum pool. We have a quad-core CPU with hyper-threading (8 threads available) and only one NVIDIA GPU in the computer. We are mining with 6 threads on the CPU and on the whole NVIDIA GPU.

Be aware .. i mined Zec and everything was ok for 2 months .. suddenly 10% drop of my hash rate without any reason for 5-6 days.. stealing hash a lot but not from the beginning like flypool… never replied to my question

Difficulty   this is the measure of how hard it is to generate a new block in the blockchain. The difficulty is designed to adjust every 2,016 blocks (roughly 2 weeks) to balance out the rate at which blocks are created. The difficulty has an absolute minimum of 1, but not such limit exists for the maximum.

Click to flag and open «Comment Reporting» form. You can choose reporting category and send message to website administrator. Admins may or may not choose to remove the comment or block the author. And please don’t worry, your report will be anonymous.

[WARN] [2017-12-04T23:58:49+03:00] Get error: A request to send or receive data was disallowed because the socket is not connected and (when sending on a datagram socket using a sendto call) no address was supplied., resetting in 5 seconds

AsicMiner Market team has been building and selling mining rigs, creating custom firmware for ASIC miners (padrino Jupiter firmware, padrino Titan firmware), and consulting on large GPU and ASIC deployments since 2011, when Bitcoin was just starting to gain popularity. We will be around for the future and are happy to help with projects of any size.

That’s right, you can use both! With most cryptos this would be wasteful, but since the Equihash algorithm is “CPU-friendly”, mining with both GPU and CPU is currently profitable. All you need to do is keep both the CPU threads (-t) and the GPU numbers (-og)

Well you need to do your own due diligence, but if you click on the link originating from the Bitcointalk EWBF support thread you should be taken to the authors downloads, which many users have reported as safe.

dstm’s ZCash Cuda miner version 0.6 adds failover pool support, one of the features that we wanted to see the most to make this a really good alternative. It is not failover pool support only however, the latest version introduces support for configuration files as well and an option to control mining intensity for the GPUs. There are also a number of other new features added as well as improvements that might be useful for some people, but we can already say that dstm’s ZCash Cuda miner is now the better miner when compared with EWBF ZCash CUDA miner, so if you are still using EWBF’s software you might want to give dstm’s one a go. Do note that dstm’s ZCash Cuda miner should be faster performing in terms of hashrate with the same settings, also there is a 2% developer fee included with this closed source miner.

If you are mining at home or by yourself, you should join an existing mining pool. You can choose mining pool to get it started with this process.  You need a mining pool to direct your hashing power. You should compare reviews and features of multiple zcash pools in order to get right decision.  You should choose the nice hash pool to get profitable mining experience.

Important: You will need to already have Zcash installed before you can start using the more specialized software below! If you want a beginners step-by-step guide to installing and using the software for you can find one here and I have embedded the official install video below.

Buying gear and mining cryptocurrency with it allows you to own an income-producing asset in the gear itself, with aftermarket resale value holding up very well and even appreciating. GPUs purchased for mining in 2015 and 2016 were often sold at a profit in 2017 due to high demand in the market!

The decentralization is done using the blockchain technology. Blockchain, is a type of a ledger that confirms transactions and lives in a distributed-fashion in the cloud. In other words, a group of computers around the world holds copies of the order books and for any given change in it, all the copies are updated. When a majority of the computers authorize a transaction, the money is securely transferred and added to the next block which will be written.

Hi Marilyn, Imgur.com is a good site for image uploads, just as a tip. The Mega page won’t load for me for some reason, probably due to my browser config. Google Drive works though. The one you want to download is Zec miner 0.3.4b – or whatever the latest working version mentioned on the forum page happens to be. I’m not really understanding the problem. Sounds like you downloaded the miner OK, just it’s named differently? That won’t be an issue. I suggest you run some virus scans on the miner you downloaded and then proceed with the rest of… Read more »

6. If you notice there are some loose heatsinks when you receive the miner, please inform us by email to sales@asicminermarket.com within 3 days from the date the package is received according to UPS/DHL/FEDEX website.

One Reply to ““zcash mining calculator _zcash””

  1. Today we are going to show you how to mine Zcash with your CPU and GPU on Windows. We are going to use two miners (Software) for each type of hardware: Nicehash miner for CPU and the claymore miner for GPU. 
    just wanted to add: especially the 1060 series is a good candidate for mining with lower power consumation. Even Equihash can be run with like 75 to 84 % power which can result in : 297 Sol/s , 86 watt usage, -> 3.45 sol/w
    Transaction Fees   This is a small, optional fee attached to a Bitcoin transfer. Upon the completion of all 21 million bitcoins being created, these fees will provide the reward to encourage miner to continue mining and verifying the network transactions.
    Zcash uses a different hashing algorithm than Bitcoin’s, making it incompatible with the special hashing hardware (ASICs) developed for Bitcoin mining. Zcash’s algorithm is known as Equihash. It’s a memory-hard algorithm; it’s designed to resist the development of Zcash-mining ASICs. Instead, Equihash is deliberately best suited for GPU mining.

Comments are closed.