“investor forum -digixdao”

Run and verify that the software is mining correctly. After several minutes check your pool for statistics (should see some shares appearing), and after minimum payout level is reached (could be days with one or two cards) check your wallet or exchange to confirm payment was sent by the pool and properly received.

I think I will end this guide at this point for now as it is getting to be quite long. While I originally intended to cover fine tuning and going over other optional arguments that the EWBF miner can use, I think I will wait and make this a two part guide. For now this Part 1 covers the basic setup and configuration of getting the EWBF miner running and shares being submitted to a pool. Since it will usually take some time before reaching a pools minimal payout period anyway, especially for just one or two cards, we have some time.

If the invalid shares were to exceed 3%, or stay at a constant 2%, you should check first to making sure you are connected to the flypool server nearest you. If you look on their homepage they will list different addresses for servers located in different parts of the world.  The next thing to check would be back on the miner to make sure you are not seeing any errors being generated there. There are too many possible scenarios to cover all in this introductory article, so I will leave any in-depth troubleshooting for a later guide.

HVAC is a serious additional expense when used to cool a mining or folding rig, it will add rough ballpark 40% to your electrical cost (somewhat less if you have a VERY high efficiency unit in the 15+ CEER/SEER range as opposed to common units that are typically 9.3 or so)

Similar to the Claymore miner (which does not currently support Zcash mining under Windows), the EWBF miner contains a 2% developer fee which can be turned off in the batch file. It is noted in the thread that disabling the fee will slightly reduce hashing power, similar to that same behavior with Claymore’s miner.

Running 1 Asus Nvidia 1080Ti on Linux mint using 390 driver , EWBF Cuda miner CLI in minergate pool. OC 202203 64-128 mem no power limit full speed fan. 60 degrees C. 769 – 775 Sol/s on Bitcoin Gold y0utub3 vid search –>> “foebage 1080ti”

If you are mining at home or by yourself, you should join an existing mining pool. You can choose mining pool to get it started with this process.  You need a mining pool to direct your hashing power. You should compare reviews and features of multiple zcash pools in order to get right decision.  You should choose the nice hash pool to get profitable mining experience.

For those with inexpensive power, this is not an issue. For those with expensive power, it can be the largest recurring cost for Zcash mining. Using our power consumption and hash rate data, here is what profit per day looks like with $0.10/ kWh, $0.20/ kWh and $0.40/ kWh power:

Another cloud mining service provider that has been available for quite some time already as well – HashFlare has also announced their plans for offering cloud mining hashrate for Zcash (ZEC). They have already started the presale of mining contracts with a price of 4.20 USD per 0.1 H/s with the launch of mining planned to start before 21.11.16, so you will be able to catch some of the slow start mining period as well. Each of their Zcash cloud mining contracts will last for 1 year (from activation) and will not have any additional fees as everything is apparently included in the price.

As we have done for Monero CPU and GPU mining, we have an easy-to-use Zcash NVIDIA GPU mining instance using the popular EWBF v0.3.3b miner. One command and you can start/ stop miners targeting single GPUs and be mining in a matter of seconds.

Sure, it’s easy. Set the Trezor up as per its documentation, making sure to accurately record and securely store the seed phrase as your top priority. Of course, you must also remember / record your PIN.

Here you can find the submissions to the challenge, along with link to the code hosted on GitHub. Not all submissions received are listed here. If a submission does not appear to include any Equihash code, then it is not published here and was not considered for judgment unless there was code added before the deadline. Submissions are listed in no particular order.

x13 Bitcoin mobile game Haasonline ETH mining pools Nvidia Pascal automated bot trading Decred ASIC HashFlare promo code RX 480 Dagger-Hashimoto hashrate repair sleeve bearing fans Bitcoin to SEPA Siacoin stratum pool cudaminer 2014-02-28 windows Bitmain C1 Siacoin sgminer cgminer 4.3.5 zeus devcon GPU Coin trading EMC exchanges LitecoinCash Banana Pi MaruCoin pools Colorful GPU mining Baikal Miner NVC mining Krugercoin pools VTC alternative crypto GRA A2 hashrate ZeusMiner discount coin list BunnyCoin exchange GTX 970 Ethereum is SegWit active CIRC Materia1 Bitcoin to Neteller BTC unconfirmed transactions MINT exchange Frostcoins Bitcoin Scrypt crypto SHA256Bitmain ASIC miner ALF pool ARB exchanges Lyrabar mining Kittehcoin info AMD Radeon R7 370 Silver Fish Blade performance Fireflycoin info GCoin Fortron FC alt crypto Bitcoin VR blockchain explorer CageCoin info cryptocurrency exchange ETH TX fee crypto currency forum official sponsorship coin 4 THS ASIC miner crypto coin investment Crypto Token ICO community driven cryptocurrency events calendar Monacoin info sgminer qubit Radeon RX 460 hashrate ccMiner 1.5.54-git sp

Not everyone has access to a computer, however, and not everyone has the time, knowledge or patience to start mining Zcash on their own, especially since there is no Graphic User Interface (GUI) Miner available yet. If you want to mine on your own computer, but need a little push to do so, you’re in the right place. But if you’re looking to profit from Zcash mining with no effort at all, this guide will do the trick.

–pass z  (the actual value of this parameter is usually ignored by pools but oftentimes required by either the pool, mining program, or both. Can be set to something like “X” or “Z” unless your pool requires a specific password).

The miner still needs some work, especially on Nvidia GPUs where by default it is pretty heavy on the CPU load and memory usage as well. It is recommended that Nvidia users add the parameter –enable-nv-hotfix in order to reduce the CPU load a bit, but still running the miner on the main GPU may make the system a bit unresponsive even with that parameter. Still if you are interested in mining MNX (even with the high hashrate and low block reward at the moment) or any other Equihash 96/5 coin you might want to check the lolMiner-mnx out.

Ethereum mining Heavycoin mining MtGox situation Bitcoin exchange rate cudaminer 2014-02-28 dstm Bcash FutureBit MoonLander USB miner Gridseed seller list uk1.ghash.io Protoshare profitability Bitcoin Gold GPU mining AntMiner U1 thermal images crypto currency community Spondoolies-Tech promotion Pxlcoin info Neoscoin pool Monocle info ASICMiner Block Erupter Cube ZeusMiner GEN III Antminer S9 BCC Meltdown AC info sharkcoin GenesisCoin pool video BIOS flash Excavator 1.2.2a consensus issue Draper University ccMiner 2.2-mod-r1 sgminer 5.1.0 Nvidia GP100 BSTY ccminer marlin siacoin miner hidden crypto miner Bitz Coin pool HAM mining copper mining rig Ethere mining rigs AntMiner S1 temperatures LeaseRig test ether-proxy Ethereum selling yescrypt miner ZeusMiner Blizzard X6 test RX 470 ethash hashrate Bata exchange Capricoin Ethminer CUDA windows cpu miner scrypt GunCoin exchange GDC mining QuickBooks Bitcoin crypto signals XSV Nybble sfards contest Bminer Nvidia miner GeForce GTX 950 Doubloons scrypt crypto BAY trading NMC pool BCN exchanges DigitalNote mining crypto extortion BChinese Yuan

6. It is recommended that you install applications such as MSI Afterburner in order to control the card’s fan. In its default mode, the power is low and it allows the card to reach a temperature of 70-80 degrees Celcius (normal when playing occasionally but not healthy when it comes to a machine running 24-hours a day).

On the GPU side, we are going to use the Claymore miner. Claymore has a long-standing reputation for optimizing miners and this miner speaks for it. It improves the hashing rate considerably and that is why we are going to take the time to download and use this miner as well. The genoil miner only works for pool mining and with AMD graphic cards. This miner charges a 2.5% developer fee. Every hour the miner mines for the developer during 90 seconds. However, the performance increase is well worth the fee charged. If you don’t agree with the dev feem, don’t use this miner

The latest NiceHash EQM Zcash 1.0.3a is available for both Windows and Linux and promises up to 320 Sol/s on a stock GTX 1070, and up to 370 Sol/s on overclocked GTX 1070 (you need to use two instances per GPU for maximum performance). We can confirms hashrates that are very close to the ones claimed on the GTX 1070 and of course the miner also does well on other NVidia GPUs. Do note however that it does require SM 5.0 GPU, meaning Maxwell or Pascal as it will not work on older Nvidia architectures…

Starting with Genesis Mining who have once more upgraded the Zcash cloud mining hashrate for their existing customers by another 25%. This means that everyone that has already purchased Zcash cloud mining hashrate from them got a nice boost in performance and amount of mined ZEC for free. Furthermore, new customers purchasing Zcash cloud mining hashrate will also get a boost in the hashrate they purchase, however the mining for new contracts purchased at the moment will start on December 1st and not immediately, so pretty much after slow start for the mining ends.

I would recommend EWBF miner for Zcash, but Claymore dual mining is just as good. Just in case anyone doesn’t know you can dual mine any coin you want, your not limited to just ETH and Decred or ETH and SIA. Just need to read the “Read Me” Text doc in your miners folder. I made a short explanation video, mind you I am not a top end Content creator… but should help..

hi, bminer also faster than other miner around 10-15%, but reject data it’s so high, i using on nicehash to mine, reject data around 3% to 5%, i will try direct to mining zecoin later and report of bminer.

In either case it continues like this indefinitely, seemingly without getting any real work done. EWBF and dstm miners have been working fine both with and without VPN. I’m using a GTX 1070 on Windows 10. Please advise.

CRITICAL BUG in version 3a and 3b, the servers are always redirected to the EU, although the script to hk .. and version 3 is very unstable, often reporting zero (0) sol .. so, UPGRADE immediately to version 4

To minimize the disruptions to your mining and settings, you may also want to disable Windows Updates. If you feel more secure leaving updates on, you can do so, but keep in mind there are frequent updates that will reboot your system and stop your mining.

The whole process of getting set up, downloading your miner, configuring Windows, and setting up your batch file to run should take less than 20 minutes. Follow along with the steps in the video guide below, or read on for a full text guide.

–user   (this will be your wallet address followed by a dot (or period) and an optional name for your rig. In this case I am simply calling it the model of my video card or GTX1080).

The EWBF CUDA Zcash Miner has a built-in developer fee that is set at 2%, meaning that every 10 minutes the software will switch to a different pool and mine for the developer some shares and then get back to mining for you. The author of the software claims speeds of about 250 H/s for Nvidia GTX 1070 while the NiceHash EQM miner does currently about 220 H/s on the same GPU. Our quick tests showed a hashrate of about 235-240 H/s average (up to 250 H/s) on stock GTX 1070, so still slightly faster, but not as much as you may want it to… then there is the dev fee as well and it seems that we are seeing somewhat more rejects than, especially when switching to mine for the dev fee. So while this may be an interesting alternative for users willing to mine outside of NiceHash, the actual performance that you may get poolside may not be much different than with what is currently the fastest implementation from NiceHash (taking into account the dev fee and the rejected shares)…

Zcash makes use of the Equihash algorithm – a Proof of Work algorithm that is unique to Zcash for now. It was invented by Alex Biryukov and Dmitry Khovratovich, and makes use of Wagner’s algorithm to provide the PoW that’s required for consensus in the Zcash Blockchain.

Leave a Reply

Your email address will not be published. Required fields are marked *