For me, i’ll select the US server as shown. Make sure to also include the port number. In the config.txt, I will insert ‘-zpool us1-zcash.flypool.org:3333’. Simply add your Zcash wallet to the wallet section by adding ‘-zwal YOUR_WALLET_ADDRESS’.
Tout d’abord il vous faut télécharger un logiciel de minage. Sur Nvidia, le mineur le mieux optimisé et qui vous donnera le meilleur hashrate est EWBF miner. En général, chaque pool vous donne une version spécifique de EWBF avec toutes les configurations liées au pool déjà effectuées.
I really like using EthOS over simple mining cause you can actually somewhat use LXDE as an operating system. The problem with EthOS is the limited number of mining programs you can run and the limited amount of packages you can install (instead of apt-get you have to use apt-get-ubuntu and about 90% of packages won’t download or install, and if they do you might have broken EthOS.)
Replace “eu” for your location, “ZEC-ADDRESS” for your zcash wallet address (transparent address) and lastly replace “-og 0” for the number of GPUs you’re using (as in -og 0 1 2 if you’re using 3 GPUs)
Once you have your batch file configured with your settings, it is time to test it out. Save and close the text editor and then double click on the batch file to run the program. If everything is running correctly you should get a screen similar to the one shown below:
Blockchain the public record of all bitcoin transactions. The blockchain may be viewed by anyone and can be used to determine how many bitcoins were attached to any one address at a given time. One place to be able to easily view this information is blockchain.info
Zcash is a fork of Bitcoin protocol, a currency that brings some major privacy improvements to its clients. A unique zero-knowledge proving technology makes it possible to shield some transaction details from prying eyes, like the sender, receiver and transaction amount. The currency has a strong developers and investors team. 10% of all Zcash tokens to ever be mined are allocated for the employees and shareholders, which is a strong stimulus for them to take good care of the network and ensure its further development and propagation.
For now though, just keep the miner running for 30-60 minutes at default settings just to make sure everything is working properly. This will also allow time for your card to find a few shares and for the pool to accept them and tabulate them on your wallet display page. There can be sometimes a 10-15 minute delay from when your shares are first accepted and any statistics to appear on the pool side, so now would be a good time to go grab a cup of coffee.
Learn more about EWBF’s Cuda Zcash Miner – We’ve only exposed you to a few of the settings that are available for use when mining. In the folder with the miner in it, open the HELP.txt file to review all available settings.
The AM200 Ethereum Miner has been in development for a number of months with the goal of delivering a high quality solution suitable for almost any environment. Proper cooling, and web based management of the miner provide for ease of use not seen with many Ethereum Miners to date,
–pass z (the actual value of this parameter is usually ignored by pools but oftentimes required by either the pool, mining program, or both. Can be set to something like “X” or “Z” unless your pool requires a specific password).
Below is an example of a batch file that we use on one of our Windows-based mining rigs. Everything is contained in a single line in the .bat file. That single line specifies the program to be run (miner) and a few settings that customize the miner’s activity. Finally, and most importantly, one of Zcash wallet addresses is specified so mined Zcash goes to the right place. Here’s the .bat file that we are currently using to start mining. Scroll to see all of it’s contents if necessary.
We all love getting consistent feedback for our work. After all, there’s nothing more frustrating than mining into the void. That’s why mining pools are so popular for miners nowadays. Instead of waiting to receive rewards on your own (which takes very long because of how unlikely it is), just join a pool to receive a fair proportion in the worth of your hash contribution to the network. Mining pools break up the rewards proportionally between all participants, which is why it’s the preferred way to mine for most lower-hash miners.
For the nVidia software, we will be configuring the start.bat file. Simply right click to edit in notepad. Once opened, we can set the server address, and your Zcash public address. For this guide we will use the ‘us1-zcash.flypool.org’ server, but choose the server closest to you. Your Start.bat file should now be configured similar to mine as seen below.
The issue is that ewbf is not the fastest miner availible so it should be compared to dtsm´s miner and the increases are not that significant. But the 1080 boost seems nice, i will test it on my rigs.
2. All sales are final. No refunds will be granted. Defective miners can be repaired for free if they fall under the Asic Miner Market warranty policy. After the warranty period, machines can be repaired at the cost of parts and labor.
As you can see our current Hashrate is showing as 506.7 H/s, which is equivalent to the Sol/s reading on the miner. The avergae hashrate is showing as 494.6 and is the effective rate for the past 24 hours. I should point out that this rate is slightly lower than the average mainly as I shut this miner down a few times in the course of writing this guide. The final part are the valid and invalid shares. Obviously you want as near as 100% valid and 0% invalid as possible, but don’t be too concerned if your see 1 0r 2% in the invalid column on occasion.
Replace “eu” for your mining pool address found on the pool “Get Started” page, “ZEC-ADDRESS” for your zcash wallet address (transparent address) and lastly replace “-t 8” for the number of threads you want to use. (If you’re using the Nicehash pool, you can use -l to specify your location like “eu” for Europe)
This is a list of the most popular Zcash Mining software for each platform, some of this software contains a built-in developers fee. I try to keep this list up to date as I can, if there is a broken link or missing software please drop me an email.
For perspective, I run several of the Gigabyte “ITX” one-fan GTX 1070 model cards on Folding@Home – which pushes a card quite a bit harder than ZCash mining does – and they stay plenty cool as long as the ambient temperature doesn’t get very high.
There is a new miner for Nvidia CUDA GPUs available for mining Zcash (ZEC) promising a slightly faster hashrate than the currently fastest implementation of the NiceHash EQM Zcash NVIDIA miner. The most important thing about this new miner is that it is not limited to only mining on NiceHash, so even with the same speed it is still a nice thing to have as it supports Stratum mining on other mining pools besides NiceHash (it does seem to support NiceHash’s Extranonce Subscribe as well). According to the author of the miner it is designed for Nvidia Pascal GPUs, but should work on older Compute 3.0 or higher Nvidia GPUs with at least 1 GB of video memory. Do note that the miner is not open source and there is only a Windows 64-bit binary release available at the moment, it does not seem to be based on other popular codebase and is not being reported as malicious software by antivirus products. You might still want to have something in mind as the user that posted it on Bitcointalk is a new account and not an established miner developer, even though it seems that the miner does work pretty well.
Disclosure: Mining metrics are calculated based on a network hash rate of 437,207 KH/s and using a ZEC – USD exchange rate of 1 ZEC = $ 243.51. These figures vary based on the total network hash rate and on the ZEC to USD conversion rate. Block reward is fixed at 10 ZEC and future block reward reductions are not taken into account. The average block time used in the calculation is 150 seconds. The electricity price used in generating these metrics is $ 0.12 per kWh. Network hash rate varies over time, this is just an estimation based on current values.
I think I’m ready to start building a rig operating system from a stock OS. I’ll be using lubuntu (my pers fav). MIning rigs make the best home computers I have my smallest rig ( 5 x 1070 Founder edition) in my living room. I hope I get everything running smoothly so I can go ham on packages and running nodes.
Currently the NiceHash EQM Zcash miner is the fastest ZEC miner out there for Nvidia GPUs with the latest release bringing up to almost 50% increase in performance for most Nvidia GPUs. Everything would have been perfect if you could use the miner for other Zcash pools, but the EQM miner is still only supporting the NiceHash service, so you mine ZEC with it, just sell your Zcash hashrate and get paid for it in Bitcoin. The recently released EWBF CUDA Zcash Miner is probably the fastest ZEC miner for Nvidia GPUs that is available for Windows that you can use on other pools for mining Zcash directly, though it is slower than the latest EQM miner release and that one also comes with 2% dev fee (no fee on the NiceHash miner, but only locked to their service).