“block coin -ethereum rate”

The latest NiceHash EQM Zcash 1.0.3a is available for both Windows and Linux and promises up to 320 Sol/s on a stock GTX 1070, and up to 370 Sol/s on overclocked GTX 1070 (you need to use two instances per GPU for maximum performance). We can confirms hashrates that are very close to the ones claimed on the GTX 1070 and of course the miner also does well on other NVidia GPUs. Do note however that it does require SM 5.0 GPU, meaning Maxwell or Pascal as it will not work on older Nvidia architectures…

Please keep this in mind before you assume that this is profitable and buy hardware. If you were mining in December 2016 assuming a $90-100 price, by January 2017 to early March 2017 your Zcash stash was worth 1/2 to 1/3rd.

All of these calculations can change based on mining difficulty as well as Zcash price fluctuations. Here is a view of what 1 December 2016 to 20 May 2017 Zcash pricing looks like via Poloniex (one of the larger exchanges):

Some of the above specialize for AMD GPUs, whereas other are tailored to Nvidia GPUs. However, you’ll find that the Claymore Miner works just fine for both, so the choice is ultimately a matter of preference.

The dstm’s ZCash Nvidia miner has been available for a while and we’ve been keeping a track, but it was only for Linux operating systems – not anymore. With the latest version 0.5.2 the miner is also released for Windows in a 64-bit binary and not anymore available only for Linux miners. The miner is closed source one and comes with a 2% developer fee included. It support Nvidia-based GPUs with Compute Capability 5.0 or later, meaning it is for Maxwell or the newer Pascal video cards. There is support available for stratum as well as for NiceHash’s extranonce, so it can be used there as well without problems for selling Equihash hashrate.

**link removed** As per your instructions (both on the printed and video instructions) when I went to “mega” (see above) and clicked, it brought me a list of about 15 items, each item that said “Zec Miner” with different dates on it. (I have a screen shot of the list but no where to upload it.) I picked the most recent date, which was the last item on the list, When I unpacked it to my desktop it still said “Zec Miner.” I went back an did a search for “EWBF ZEc Miner” on that same forum page with no… Read more »

Be aware .. i mined Zec and everything was ok for 2 months .. suddenly 10% drop of my hash rate without any reason for 5-6 days.. stealing hash a lot but not from the beginning like flypool… never replied to my question

Well you need to do your own due diligence, but if you click on the link originating from the Bitcointalk EWBF support thread you should be taken to the authors downloads, which many users have reported as safe.

We wanted to investigate whether buying overclocked cards was worth it for mining. If you are buying these cards and using them out of the box in Linux (for machine learning) then you do not have access to the nice Windows overclocking tools. Also, crypto mining generates 24×7 load so some of the aftermarket cooling solutions on the overclocked cards can be extremely advantageous. One other point to note is that larger cards like the ASUS STRIX models have PCB and coolers that rise well beyond the PCIe slots. That should be a consideration if you are thinking about these systems in rackmount enclosures.

HVAC is a serious additional expense when used to cool a mining or folding rig, it will add rough ballpark 40% to your electrical cost (somewhat less if you have a VERY high efficiency unit in the 15+ CEER/SEER range as opposed to common units that are typically 9.3 or so)

This article needs to be proofread. There are multiple spelling errors and incorrect word usage, such as “This is because the Claymore miner is faster but only works for CPU.”. Claymore miner is faster for GPU, not CPU.

FinCEN   The Financial Crimes & Enforcement Network functions under the authority of The United States Department of the Treasury. FinCEN is the portion of the agency charged with combatting money laundering and other illicit financial practices. They are currently one of the lead agencies trying to figure out how to regulate and monitor the flow of Bitcoin.

Below is an example of a batch file that we use on one of our Windows-based mining rigs. Everything is contained in a single line in the .bat file. That single line specifies the program to be run (miner) and a few settings that customize the miner’s activity. Finally, and most importantly, one of Zcash wallet addresses is specified so mined Zcash goes to the right place. Here’s the .bat file that we are currently using start mining. Scroll to see all of it’s contents if necessary.

Oks thanks so its a high investment to make good money thats the way I see it… But what I did not understand is you said: multiply the outputs by 6… …Then multiply the outputs by 6… Why by 6? …. and If i did the math correctly, with the link you provided me with, well the total output income will be $180k an Year (Sure depending on the UNSTABLE MARKET of course) anyhow even getting around $10K it gets back the investment and some extra cash don’t you think? so my question is… is this real? and if so….… Read more »

After you have accumulated a certain amount and you wish to withdraw it, click “wallet” and then “cash out”. Verify the amount and wallet address first. Within a few minutes, the amount will be sent to your wallet.

Notice I only have one GPU running. If you have multiple GPUs they all should be displayed as separate line entries starting with 0. At the top we can verify the mining program and version, the server, solver we are using (in this case the default or auto selected), devices configured for mining (more for multiple GPU systems, in our example just one even though it says all), max temperature limit of 90 degrees C (default setting) after which point the mining software will shutdown to prevent GPU damage, and information on if the optional API is enabled or disabled, as in our case.

Interesting blog. I was about to post a similair post. Buy and hold for the upcoming 3 years and the blockchain market will find it’s way. I was researching a way to do better investment analysis on the current cryptos. I was wondering if anyone of you uses: https://www.coincheckup.com Since I use this site I make so much less basic investment mistakes.

“investment +ethereum eth”

2. All sales are final. No refunds will be granted. Defective miners can be repaired for free if they fall under the Asic Miner Market  warranty policy. After the warranty period, machines can be repaired at the cost of parts and labor.

hi, bminer also faster than other miner around 10-15%, but reject data it’s so high, i using on nicehash to mine, reject data around 3% to 5%, i will try direct to mining zecoin later and report of bminer.

If you’re at the phase of building a mining rig, check out our 6 GPU mining rig guide. The 3-part tutorial walks through each and every step to get your up and mining with as little hassle as possible.

Visit this website, fill out the details and confirm the email sent: Choose a 4-digit pin code which will be used in each update. Enter the site and select Zcash on the left side – Click on “wallet” and enter your ZEC wallet address. Click on “Update Account”.

It is advisable to put the fan regularly on a certain percentage so that the heat of the card is about 60 degrees (note that during the day the house is warmer and the temperature will rise accordingly).

If you are okay with the risks, then Zcash mining offers a way to monetize your NVIDIA GPU. We did try mining on Maxwell, and for that, Monero was more efficient. The impact of this cannot be understated. The Geforce GTX 1070, GTX 1080 and GTX 1080 Ti are still the top dogs for gaming, VR, deep learning, and most other deep learning activities, at least until AMD Vega launches and becomes available. With Zcash mining, NVIDIA GPUs can remain competitive on crypto mining profitability.

One thing I will mention is that mining software is often flagged from antivirus vendors as containing malware even though they don’t. The reasons for the many false positives is that a lot of malware does contain these mining programs since botnet operators can secretly install mining software on unsuspecting user’s PCs and point to an address they (the botnet operator) controls. As a result, many of the antivirus vendors simply mark anything with a mining program as suspect. This is because even though mining is becoming more popular, it is still probably done by less than 1% of all computer users who would use antivirus scans, so to the antivirus vendors this means 99% of their target audience who has a miner program probably didn’t put it there themselves. They play it safe and just mark it as malware or PuP (potentially unwanted program) as they figure if you are a miner you know its there and probably have the technical ability to work around it.

If you are mining at home or by yourself, you should join an existing mining pool. You can choose mining pool to get it started with this process.  You need a mining pool to direct your hashing power. You should compare reviews and features of multiple zcash pools in order to get right decision.  You should choose the nice hash pool to get profitable mining experience.

Run and verify that the software is mining correctly. After several minutes check your pool for statistics (should see some shares appearing), and after minimum payout level is reached (could be days with one or two cards) check your wallet or exchange to confirm payment was sent by the pool and properly received.

You can mine it to an exchange or to hardware wallet like Ledger Nano S. amd Trezor.  In this guide, we have mentioned all about the setting process of Nvidia EWBF Miner. You should know how to set and use it up.  Mining process can be very profitable for you if you have any AMD card.

Welcome to Asic Miner Market, the most advanced cryptocurrency mining, hash hardware service. We sell Asic GPU, Coin, Hash, ASIC Mining hardware, and solutions. Why bother with risky mining contracts or renting when you can buy hashing power directly? Asic Miner Market brings more sense to the market.

 AMD GPU miners were recently getting quite the boost thanks to Claymore’s Zcash miner on Windows, but now Windows users with Nvidia GPUs also got a nice boost in ZEC mining performance thanks to the release of the NiceHash EQM Zcash Nvidia Optimized Miner. It kind of doubles the performance that people were getting with the previous nheqminer from Nicehash, so now with a 6x GTX 1070 GPUs for example you can be all the way up to about 400 H/s. Do note that the miner currently supports only newer Nvidia GPUs and will apparently not work on anything lower than SM 5.0 capable GPUs – Maxwell or Pascal.

It can also help to check your equipment on different mining profitability websites. Sometimes the estimations vary so you can get a more accurate prediction by trying out different calculators. Some worth mentioning are:

ZCash uses Equihash as an hashing algorithm, which is an asymmetric memory-hard PoW algorithm based on the generalized birthday problem. It relies on high RAM requirements to bottleneck the generation of proofs making ASIC development unfeasible, much like Ethereum.

The answer? Difficulty. By automatically adjusting the computational difficulty of solving a block, the Zcash blockchain is able to maintain 2.5-minute intervals. You’ll notice that difficulty closely tracks hashrate, and it, too, has seen exponential growth this year:

Next, you will have to ensure you have the correct virtual memory enabled (minimum 16GB). To do this, search for system in the start menu. Open system and on the left hand side click ‘Advanced System Settings.’ Go under the advanced tab, under performance settings, and advanced again. Then click ‘Change’ under virtual memory. Uncheck the box that states to ‘Automatically manage paging file size for all drives’ and then input a custom size of 16384 (or whatever is the maximum allowable value up to 16GB) into the Initial and Maximum size fields. This will prevent you from having any errors with virtual memory.

TBMINER has no duty to provide the service of installing and debugging door to door. The accessories are provided by TBMINER, and the installing and debugging are responsible by the customers themselves after buying. The install video could get from our website, please click to view.

Cpu Mining is not profitable when you pay for electricity. When I bought my rig last October I bought some expensive i7 6800k CPU. It was profitable for the first days and had around 38H/S But then GPU Hashrates got better and I turned CPU Miner off.

It’s worth noting that the AMD solutions tend to have a better ROI than than what you’ll get with Nvidia GPUs. However, if you find good oppers on Nvidia GPUs, don’t hesitate to choose those over the AMD alternatives.

After creating an account you’ll need to setup a worker to help keep track of your mining progress, to do this use the link below and add a new worker to your account called worker1 and set the password as x. (or use details as you see fit)

ASUS GTX 980 Ti STRIX OC 6GB 495 1468 3305 382.53 275 +109 Core clock, +100 Memclock, +50mV min +37mV max, fan auto, 110% powertarget, 91°C Target. Maxes at 79°C while mining EWBF 0.3.4b Win 10 x64 Kappawaii new / used as of June 2017

GeForce GTX 590, GeForce GTX 580, GeForce GTX 570, GeForce GTX 560 Ti, GeForce GTX 560 SE, GeForce GTX 560, GeForce GTX 555, GeForce GTX 550 Ti, GeForce GT 545, GeForce GT 530, GeForce GT 520, GeForce 510

A: The miner uses adaptive intensity and tries to use the maximum intensity value, with the help of the –intensity option you can set a limit on the maximum intensity, this will slightly reduce gpu usage and performance. Allowed values 1 – 64. You can set different values for each cards –intensity 64 64 64 64

Ethereum value does fluctuate like many similar currencies but at it’s current value a return on investment in a few months is very likely . This is not guaranteed as I have no control over the value of Ethereum however it is showing great promise as many major institutions are investing. In addition to the value in mining Ethereum this system is flexible as it is a ASIC based miner so it can mine virtually any GPU

That’s right, you can use both! With most cryptos this would be wasteful, but since the Equihash algorithm is “CPU-friendly”, mining with both GPU and CPU is currently profitable. All you need to do is keep both the CPU threads (-t) and the GPU numbers (-og)

Tags: Equihash, Equihash miner, Equihash mining, Genesis Mining, Genesis Mining Zcash, Genesis Mining ZEC, Zcash, Zcash cloud mining, Zcash CPU miner, Zcash crypto, Zcash details, Zcash GPU miner, Zcash miner, Zcash mining, Zcash specifications, ZEC, ZEC cloud mining, ZEC CPU miner, ZEC crypto, ZEC details, ZEC GPU miner, ZEC miner, ZEC mining, ZEC specifications

You will now need to choose a pool in which to mine at. Most pools now use your wallet address as an account, with payments sent automatically to your wallet address once you reach the pool’s payment threshold. There are still some exceptions to this, such as the Suprnova pool which still requires you to register an separate account and input your wallet address separately.

Hi.. Need some help.. I have [HP Pavilion Notebook 15-ab055tx](https://support.hp.com/my-en/document/c04 731184) with NVIDIA GeForce 940M (2 GB DDR3L dedicated) Graphics…Do you think it’s possible mining Zcash In this laptop..

Find the place you installed Cuda and navigate to it. To do this it is easiest to download it and drag it into your home folder. To do this press the file cabinet at the top left of the screen. It should open up to the desired folder. You should see icons like Desktop, Documents, Downloads, etc. Now just drag your Cuda download here.

Cold Storage   This is the process of moving your bitcoins to an offline wallet. The benefit of this is that no one can hack into your computer and steal your private keys if your computer is not connected to a network. Bitcoins will need to be brought back out of cold storage to be spent or transferred again.

“icons _investment yield”

For this test, we are using the EWBF 0.3.3b miner. We are comparing all of the GTX series GPUs in terms of mining performance as well as power consumption. For the NVIDIA GTX 1070, GTX 1080 and GTX 1080 Ti we have both Founder’s Edition and overclocked variants. We did not test the GTX 1050 (2GB) and GTX 1060 (3GB) variants because they have significantly lower value for gaming and machine learning. We are assuming these GPUs are not dedicated miners and instead Zcash mining is something to utilize hardware while it is idle/ offset costs.

GPU   Graphical Processing Unit, a GPU (or commonly just referred to as a graphics card) was previously the dominant way of Bitcoin mining. It was way beyond the efficiency of a CPU and plenty common among computer users to gain widespread adoption. With the increase in the difficulty it has recently become too inefficient for most to continue mining with GPUs as their electric bills now compete with the value they generate. For futher details, please see our hardware page.

One of my GPUs is throwing out a constant stream of “GPU #2 returned incorrect data!” errors. It’s a rig with 4x 7950s running at stock speeds (925 MHz GPU clock, 1250 MHz Mem clock) and all are running below 70C with fan speeds set at 85%. Most people with this issue seem to have much higher temps or big overclocks. Also, adjusting the intensity does not help. Has anyone else run into this or managed to fix it?

Oks thanks so its a high investment to make good money thats the way I see it… But what I did not understand is you said: multiply the outputs by 6… …Then multiply the outputs by 6… Why by 6? …. and If i did the math correctly, with the link you provided me with, well the total output income will be $180k an Year (Sure depending on the UNSTABLE MARKET of course) anyhow even getting around $10K it gets back the investment and some extra cash don’t you think? so my question is… is this real? and if so….… Read more »

Today we are going to show you how to mine Zcash with your CPU and GPU on Windows. We are going to use two miners (Software) for each type of hardware: Nicehash miner for CPU and the claymore miner for GPU. 

Incentivizing the creation of open source miners will enable a wider community to mine for Zcash coins and take ownership of the network as a public good. While we expect a full range in size of Zcash miners to exist, the more individuals who run a miner (whether GPU or CPU) the stronger the network.

Advantages: It does seem to be a bit less stressful on hardware — power usage is a bit lower. You can watch YouTube HD videos without chopping while Bminer works, and it will dial down hash rate to accommodate this. DSTM and EBWF usually make watching videos or working on spreadsheets uncomfortable to impossible.

FPGA   Field Programmable Gate Array, an FPGA is the former king of the Bitcoin mining world. An FPGA is an integrated circuit whos function can be changed as it can be reprogrammed. This makes if more versatile than an ASIC, but far less efficient in its ability. They enjoyed a short time between GPUs and ASICs as the most efficient way to mine. For further details, please see our hardware page.

We’ve been using Nanopool for our ETH mining rigs for over 4 months, and it works just fine. Dashboard is very clear and makes it easy for newbies like us to setup. Payments are released once or twice a day when every time we reach our ETH threshold. So far, no caomplaints whatsoever. Plus, they send you email notifications every time a rig stops mining for any reason.

You should also go through the various guides that help learn how to install any of them wallet.  You can also use an exchange as a wallet but this is not recommended. Once you have your pool and wallet ready, you can start process of Zcash mining.

Could u please run another test. Set your cpu-governor to performance mode this time. The miner is highly multithreaded. Since it scales so bad compared to a 1070 – it could be due to scheduling latencies. So if u have some time pls test with cpu-scaling governor set to performance.

GeForce GTX 690, GeForce GTX 680, GeForce GTX 670, GeForce GTX 660 Ti, GeForce GTX 660, GeForce GTX 650 Ti BOOST, GeForce GTX 650 Ti, GeForce GTX 650, GeForce GTX 645, GeForce GT 645, GeForce GT 640, GeForce GT 635, GeForce GT 630, GeForce GT 620, GeForce GT 610, GeForce 605

TBMINER has no duty to provide the service of installing and debugging door to door. The accessories are provided by TBMINER, and the installing and debugging are responsible by the customers themselves after buying. The install video could get from our website, please click to view.

For those who may be unfamiliar, Pascal is the code name for Nvidia’s latest micro-architecture which includes all GeForce 10 (10xx) series cards, such as the GTX 1050, GTX 1060, GTX 1070, GTX 1080, the Ti variants as well as Titian X and Xp cards. So basically the miner is optimized for Nvidia 10 series cards, but should still work with most Nvidia cards that have least 1 GB of on-board memory and Compute 2.0 or higher capabilities.

In the miner window it reports higher hashrates for 1060 3GB, approximately 20 sols/s more compared compared to ewbf or 10 sol/s more compared dstm miner. Now it needs to be tested if hashrate on the pool is as high as reported.

I’ve a question, I have a 700W Power supply(non modular) , and currently a gtx 1080 and one gtx 1060 3GB. So the miner shows that I’m using about 200W for this gtx, if I connect one more gtx 1060 3GB and I start the miner, it shows errors like it hasn’t enought power, and the last gpu stops running but the fan go 100%.

We wanted to investigate whether buying overclocked cards was worth it for mining. If you are buying these cards and using them out of the box in Linux (for machine learning) then you do not have access to the nice Windows overclocking tools. Also, crypto mining generates 24×7 load so some of the aftermarket cooling solutions on the overclocked cards can be extremely advantageous. One other point to note is that larger cards like the ASUS STRIX models have PCB and coolers that rise well beyond the PCIe slots. That should be a consideration if you are thinking about these systems in rackmount enclosures.

While the coins of the “old world” as we all know, were and still are issued by centralized bodies such as banks and governments, and are created as printed bills or banknotes, the process of creating money in the world of crypto is decentralized.

Please keep this in mind before you assume that this is profitable and buy hardware. If you were mining in December 2016 assuming a $90-100 price, by January 2017 to early March 2017 your Zcash stash was worth 1/2 to 1/3rd.

Tags: Claymore, Claymore AMD miner, Claymore miner, Claymore Zcash, Claymore Zcash miner, Claymore ZEC, Claymore ZEC miner, Claymore’s Zcash AMD GPU Miner, Zcash AMD miner, Zcash GPU miner, Zcash miner, Zcash Windows miner, ZEC AMD miner, ZEC GPU miner, ZEC miner, ZEC Windows miner

Blockchain   the public record of all bitcoin transactions. The blockchain may be viewed by anyone and can be used to determine how many bitcoins were attached to any one address at a given time. One place to be able to easily view this information is blockchain.info

The issue is that ewbf is not the fastest miner availible so it should be compared to dtsm´s miner and the increases are not that significant. But the 1080 boost seems nice, i will test it on my rigs.

Disclosure: Mining equipment metrics are calculated based on a network hash rate of 437,207 KH/s and using a ZEC – USD exchange rate of 1 ZEC = $ 243.51. These figures vary based on the total network hash rate and on the ZEC to USD conversion rate. Equipment cost can vary, block reward is fixed at 10 ZEC and future block reward reductions are not taken into account. The electricity price used in generating these metrics is $ 0.12 per kWh. Network hash rate varies over time, this is just an estimation based on current values.

There is a new miner for Nvidia CUDA GPUs available for mining Zcash (ZEC) promising a slightly faster hashrate than the currently fastest implementation of the NiceHash EQM Zcash NVIDIA miner. The most important thing about this new miner is that it is not limited to only mining on NiceHash, so even with the same speed it is still a nice thing to have as it supports Stratum mining on other mining pools besides NiceHash (it does seem to support NiceHash’s Extranonce Subscribe as well). According to the author of the miner it is designed for Nvidia Pascal GPUs, but should work on older Compute 3.0 or higher Nvidia GPUs with at least 1 GB of video memory. Do note that the miner is not open source and there is only a Windows 64-bit binary release available at the moment, it does not seem to be based on other popular codebase and is not being reported as malicious software by antivirus products. You might still want to have something in mind as the user that posted it on Bitcointalk is a new account and not an established miner developer, even though it seems that the miner does work pretty well.

On the GPU side, we are going to use the Claymore miner. Claymore has a long-standing reputation for optimizing miners and this miner speaks for it. It improves the hashing rate considerably and that is why we are going to take the time to download and use this miner as well. The genoil miner only works for pool mining and with AMD graphic cards. This miner charges a 2.5% developer fee. Every hour the miner mines for the developer during 90 seconds. However, the performance increase is well worth the fee charged. If you don’t agree with the dev feem, don’t use this miner

That’s right, you can use both! With most cryptos this would be wasteful, but since the Equihash algorithm is “CPU-friendly”, mining with both GPU and CPU is currently profitable. All you need to do is keep both the CPU threads (-t) and the GPU numbers (-og)

Although Zcash is already a mature coin, it is still not coming close to the load and size of Bitcoin’s and Ethereum’s chains, so, in most cases, mining it is more profitable. In 2016 when Zcash came into the world, it was very profitable to mine it. Due to the fact that there were only 12 Zcash coins in circulation, the price went up to the astronomical price of 3000 Bitcoins for one Zcash coin!

Two minus signs indicate variables or settings that will be supplied to the miner when it starts. Whatever directly follows a minus sign and setting is the value for the mining software to use. Let’s go through each in this file.

“rise coin |best cryptocurrency to invest in 2017”

Ok, maintenant on va s’attaquer au vif du sujet ! dans ce vrai premier tutoriel, on va voir comment miner sur l’algorithme equihash avec un GPU Nvidia. Dans une première partie nous verrons la configuration du mineur et dans une seconde partie, nous verrons comment optimiser le mining (overclock).

The official Zcash 1.0 User guide at https://github.com/zcash/zcash/wiki/1.0-User-Guide is a great place to start and just get familiar with how Zcash works. The Zcash software provided by Zcash company is a complete package that will let you run a full Node, Mine with your CPU, and also has a built in Wallet for sending and receiving Zcash.

Once you have your batch file configured with your settings, it is time to test it out. Save and close the text editor and then double click on the batch file to run the program. If everything is running correctly you should get a screen similar to the one shown below:

You can click the Download button for the current driver or choose Download Previous Drivers & Software on the right-hand side. This will allow you to choose an older version that will be a great driver for mining based on your card:

Yuval has been on several customer facing and management positions in software companies and projects. An industrial engineer with a passion for business, technology, and innovation. Loves to create while having fun!

The blockchain allows the transfer of funds in a decentralized manner, while security and fraud-prevention are carried out by encryption, hence the name crypto, as cryptography is the discipline of encryption. Encrypting and verifying a transaction requires work. Computers which do this kind of work, which is basically solving a mathematical puzzle, get to write the next block in the chain, and are rewarded with coins for it – this is practically the mining operation. The more miners a network has, the stronger it is and the faster and more secure it is.

[WARN] [2017-12-04T23:58:49+03:00] Get error: A request to send or receive data was disallowed because the socket is not connected and (when sending on a datagram socket using a sendto call) no address was supplied., resetting in 5 seconds

Here you can see the miner.exe which is the main program, a couple of support dll’s (Dynamic Link Libraries), a help.txt file with some basic command overviews, as well as several .bat (Windows batch) files with example configurations for several mining pools that support Zcash.

Galax GTX 1080 Ti HOF 790 2062.5 5400 382.53 200 Undervolted to 1v for GPU / Mem stock. max 800 Sol/s / +120 MHz Core – +400MHz Mems. 60-63C max with A/C – 65-66 without. EWBF 0.3.4b Win 10 x64 EllinasUser

Be aware .. i mined Zec and everything was ok for 2 months .. suddenly 10% drop of my hash rate without any reason for 5-6 days.. stealing hash a lot but not from the beginning like flypool… never replied to my question

I’ve done a search here and no one is talking about Bminer a new Equihash miner released last month. from gpumining I started with EBWF then I discovered DSTM which the tits with the higher hashrate but it was fairly unstable if I tried to adjust the vid cards through MSI AB giving me hard freezes or bsods. Sometimes they happened a short while after I walked away after adjusting a setting to give it time to settle. Sometimes hours later. I saw this post: https://bitcointalk.org/index.php?topic=2519271.320 and tried it out. Using the exact same stable msi AB settings I… Read more »

Your first step will be to choose a Zcash mining pool. There are plenty to choose from, but we recommend Flypool. The home page or help section of a mining pool site will likely contain instructions on how to mine on its pool using the popular EWBF Miner.

Tags: Claymore Zcash miner, EQM, Nicehash, NiceHash EQM miner, Nvidia Zcash miner, Nvidia ZEC miner, Silentarmy, Silentarmy AMD, Silentarmy NVidia, Windows Zcash miner, Windows ZEC miner, Zcash GPU miner, ZEC GPU miner

There are other Equihash coins you can mine, such as bitcoin gold, but this will be covered in another guide. This guide will focus on how to get your equipment mining Zcash. Before you start, always ensure that you have the latest appropriate drivers installed to ensure things go smoothly without crashing. Also note that almost all antivirus or anti-malware will pick this software up as malware.

AsicMiner Market team has been building and selling mining rigs, creating custom firmware for ASIC miners (padrino Jupiter firmware, padrino Titan firmware), and consulting on large GPU and ASIC deployments since 2011, when Bitcoin was just starting to gain popularity. We will be around for the future and are happy to help with projects of any size.

In the miner window it reports higher hashrates for 1060 3GB, approximately 20 sols/s more compared compared to ewbf or 10 sol/s more compared dstm miner. Now it needs to be tested if hashrate on the pool is as high as reported.

While the coins of the “old world” as we all know, were and still are issued by centralized bodies such as banks and governments, and are created as printed bills or banknotes, the process of creating money in the world of crypto is decentralized.

Hello zcasher, I would like to mine zcash for fun (and learn) with my laptop’s CPU. I how could do it? Whats software do you suggest (Windows) Since now I have tried to mine Monero using Claymore’s CryptoNote CPU -where the developer ask for a 2.5% –

Zcash, a privacy centered cryptocurrency, made a mark in the mining scene by use of its ‘Equihash’ Proof of Work mining algorithm. The algorithm distinguishes itself from others with its focus on memory. In short, to mine Zcash, you’ll likely need more memory than what you’d need for other cryptocurrencies. But don’t worry, Zcash’s whopping $350+ USD trading value gives you enough incentive to get started.

Tags: Claymore, Claymore AMD miner, Claymore miner, Claymore Zcash, Claymore Zcash miner, Claymore ZEC, Claymore ZEC miner, Claymore’s Zcash AMD GPU Miner, Zcash AMD miner, Zcash GPU miner, Zcash miner, Zcash Windows miner, ZEC AMD miner, ZEC GPU miner, ZEC miner, ZEC Windows miner

“safe investments with high returns centz”

The EWBF Zcash Cuda Miner is written primarily for Nvidia cards running under Windows, and in its description the developer indicates that it is: “Written for Pascal GPUs but works on cards with at least 1Gb memory, and Compute Capability 2 and higher.”

Configure the mining software (usually via batch file) to point to your desired pool and mine to your wallet address, as well as any GPU specific options you may need (or want) to enable (if supported).

Zcash makes use of the Equihash algorithm – a Proof of Work algorithm that is unique to Zcash for now. It was invented by Alex Biryukov and Dmitry Khovratovich, and makes use of Wagner’s algorithm to provide the PoW that’s required for consensus in the Zcash Blockchain.

Mining   This is the process by which new blocks are created and all Bitcoin transactions are verified. Mining is actually a poor name for the process taking place, but caught on due to the hope of completing a block and winning the attached Bitcoin reward.

Thanks for the article i’ve set up everything I believe correctly and I have one gpu msi armor gtx 1060 running but my other 2 gpus (same models) are not running. On initial start up all gpu fans will spin and then one pretty much takes command. Any thoughts on what the issue could be??

At the beginning you could effectively mine Zcash with just a CPU, but due to advancements in software GPU’s have a huge advantage over CPU’s. You can still use a CPU to mine but your return will be very low, so all of the serious miners use GPU rigs. GPU miners will often fall into one of two camps:

Nicehash Zcash minerSilentArmy Zcash minerClaymore’s Zcash AMD GPU minerEthminerGenoilClaymore CryptoNote GPU MinerClaymore CryptoNote Windows CPU Minerccminer-cryptonightCPUMiner-MultiYam minerEWBF Cuda BTG minerClaymore’s BTG AMD GPU miner

For now though, just keep the miner running for 30-60 minutes at default settings just to make sure everything is working properly. This will also allow time for your card to find a few shares and for the pool to accept them and tabulate them on your wallet display page. There can be sometimes a 10-15 minute delay from when your shares are first accepted and any statistics to appear on the pool side, so now would be a good time to go grab a cup of coffee.

There’s no payout. Reach 700, took a screen shot, but no income. If I could give lower than one star I’d do it. It also forces to open up a coinbase account specific for this app even if I already have one.

I use the MSI GTX 1080 TI AERO. These cards are the best in performance and cooling. They have from to back airflow that keep these cards cooler than most. Note: Do not buy the Gigabyte version of these. They have firmware issues and crash.

Using this miner is easy but you have to specify the number of cores you have for better performance.  You should check your CPU count by opening task manager.  The nicehash miner has 2 versions and comes with it. One version is to get paid in BT C and another in Zcash. Now open the nheqminer_zcash” file now you can start mining with CPU and paste the command given below:

Today we are going to show you how to mine Zcash with your CPU and GPU on Windows. We are going to use two miners (Software) for each type of hardware: Nicehash miner for CPU and the claymore miner for GPU. 

First, head over to whattomine.com, which provides up-to-date figures for current prices, block times, and network hashrates (as measured in megahashes per second, or MH/s, denoting millions of calculations per second).

Important: You will need to already have Zcash installed before you can start using the more specialized software below! If you want a beginners step-by-step guide to installing and using the software for you can find one here and I have embedded the official install video below.

Ethereum value does fluctuate like many similar currencies but at it’s current value a return on investment in a few months is very likely . This is not guaranteed as I have no control over the value of Ethereum however it is showing great promise as many major institutions are investing. In addition to the value in mining Ethereum this system is flexible as it is a ASIC based miner so it can mine virtually any GPU

Install your GPU drivers as you normally would and reboot. You’ll know your GPU has been recognized correctly if you go to Device Manager (search it in Windows search bar) and you don’t see any warning marks on your GPUs. They should look like this:

I think nowadays altcoin mining become faded. Since mining is not a good solution for scaling up the altcoin. The altcoin is going to change from POW to POs. And there are more and more ICO with fixed amount of tokens. So the future of mining is not so optimistic…

[WARN] [2017-12-04T23:58:59+03:00] Get error: A request to send or receive data was disallowed because the socket is not connected and (when sending on a datagram socket using a sendto call) no address was supplied., resetting in 5 seconds

Once on your wallet statistic page (if it is blank or your get an error be aware that it may take several minutes to generate if your are newly mining to the pool) you should now be able to confirm your shares are being correctly received and accounted for. In the image shown below I have pulled up my statistic page. I have five miners pointed at this particular address right now, including the EWBF running on a single GTX 1080, which is shown below as the first entry.

It’s worth noting that the AMD solutions tend to have a better ROI than than what you’ll get with Nvidia GPUs. However, if you find good oppers on Nvidia GPUs, don’t hesitate to choose those over the AMD alternatives.

Could u please run another test. Set your cpu-governor to performance mode this time. The miner is highly multithreaded. Since it scales so bad compared to a 1070 – it could be due to scheduling latencies. So if u have some time pls test with cpu-scaling governor set to performance.

Quadro P6000, Quadro P5000, Quadro M6000 24GB, Quadro M6000, Quadro M5000, Quadro M4000, Quadro K6000, Quadro K5200, Quadro K5000, Quadro K4000, Quadro K4200, Quadro K2200, Quadro K2000, Quadro K2000D, Quadro K1200, Quadro K620, Quadro K600, Quadro K420, Quadro 6000, Quadro 5000, Quadro 4000, Quadro 2000, Quadro 2000D, Quadro 600, Quadro 410

The average mining rate of the system is 200Mh/s, providing an opportunity for an excellent return at current ETH values, if ETH continues to climb as Bitcoin has it will produce a return many times over.

6. If you notice there are some loose heatsinks when you receive the miner, please inform us by email to sales@asicminermarket.com within 3 days from the date the package is received according to UPS/DHL/FEDEX website.

Yuval has been on several customer facing and management positions in software companies and projects. An industrial engineer with a passion for business, technology, and innovation. Loves to create while having fun!

[WARN] [2017-12-04T23:58:54+03:00] Get error: A request to send or receive data was disallowed because the socket is not connected and (when sending on a datagram socket using a sendto call) no address was supplied., resetting in 5 seconds

Zcash is a fork of Bitcoin protocol, a currency that brings some major privacy improvements to its clients. A unique zero-knowledge proving technology makes it possible to shield some transaction details from prying eyes, like the sender, receiver and transaction amount. The currency has a strong developers and investors team. 10% of all Zcash tokens to ever be mined are allocated for the employees and shareholders, which is a strong stimulus for them to take good care of the network and ensure its further development and propagation.

Plug in your card at the top and click on the model number (the red square below), and the hashing and profitability info will be displayed below (click Equihash to make it blue so it will calculate).

To achieve this, we need open source miners for anyone to use. The Zcash Company sponsored the Zcash Open Source Miner Challenge operated by Least Authority. The Winners and Runners Up of this challenge are listed on the submissions page.

In this post I’ll break down the various steps required to mine the eagerly anticipated Zcash which is due to be released on the 28/10/16. In advance of the launch day we can prepare our machines to be ready right from the very start.

Keep in mind that your profitability will depend mostly on your electricity and internet costs. As such, it’s common to find large mining operations close to power plants, as those ventures tend to strike up B2B rates with the plants themselves to ensure profitability. But don’t worry, it’s likely that your conditions could lead to a reasonable ROI (Return on Investment) as well. Just make sure to calculate the ins and outs of your situation before you make a sizable investment.

Zcash is an open source cryptocurrency that focuses on the privacy element. This cryptocurrency is mineable utilizing the CPU, and/or GPU. It is a popular currency to mine with nVidia GPU’s as the algorithm hashes better on these GPU’s vs. their AMD competitors. The GTX series is the most popular for mining Zcash.

This is a list of the most popular Zcash Mining software for each platform, some of this software contains a built-in developers fee. I try to keep this list up to date as I can, if there is a broken link or missing software please drop me an email.

One thing I will mention is that mining software is often flagged from antivirus vendors as containing malware even though they don’t. The reasons for the many false positives is that a lot of malware does contain these mining programs since botnet operators can secretly install mining software on unsuspecting user’s PCs and point to an address they (the botnet operator) controls. As a result, many of the antivirus vendors simply mark anything with a mining program as suspect. This is because even though mining is becoming more popular, it is still probably done by less than 1% of all computer users who would use antivirus scans, so to the antivirus vendors this means 99% of their target audience who has a miner program probably didn’t put it there themselves. They play it safe and just mark it as malware or PuP unwanted program) as they figure if you are a miner you know its there and probably have the technical ability to work around it.

“zcash mining profitability |how to airdrop”

[WARN] [2017-12-04T23:58:49+03:00] Get error: A request to send or receive data was disallowed because the socket is not connected and (when sending on a datagram socket using a sendto call) no address was supplied., resetting in 5 seconds

If you have a Linux CUDA compute machine available we highly recommend using nvidia-docker. Installing different CUDA versions for Zcash mining and deep learning frameworks and managing versions can be painful. Using nvidia-docker you do not have to worry about that.

The other software I will be using in this guide and recommend is MSI’s Afterburner, which the latest version can be found on the MSI site here. The version of Afterburner I used for the guide is 4.3.0.9267.

This is a list of the most popular Zcash Mining software for each platform, some of this software contains a built-in developers fee. I try to keep this list up to date as I can, if there is a broken link or missing software please drop me an email.

The good news is that getting started with Zcash mining is very simple. You don’t need to download the full Zcash blockchain or manage clunky command-line miners with manual instructions; you can mine directly to an exchange or to a hardware wallet such as Trezor or Ledger Nano S. Of course, you should always do your due diligence to ensure your coins will be properly supported before sending them anywhere.

Blockchain   the public record of all bitcoin transactions. The blockchain may be viewed by anyone and can be used to determine how many bitcoins were attached to any one address at a given time. One place to be able to easily view this information is blockchain.info

Once you have these downloaded open up Linux Live, select your usb you want to use and select the Ubuntu 14.04 iso you just downloaded. Then press the lightning button. Once it is done reboot your PC, and boot into the BIOS. You can usually do this by pressing F2 or F12 when the computer is booting up. Once you are here select ‘Boot Menu’ and select your USB drive. From here it is pretty self explanatory.

Here you can see the miner.exe which is the main program, a couple of support dll’s (Dynamic Link Libraries), a help.txt file with some basic command overviews, as well as several .bat (Windows batch) files with example configurations for several mining pools that support Zcash.

You will also need a Zcash wallet address either from a Zcash wallet you installed and run on your own PC, or a Zcash “Deposit” address from an exchange. I would recommend learning how to install run your own wallet unless you are only going to mine with a few cards and plan to exchange the coins right away. Several of the large exchanges support Zcash so you can obtain a wallet address from one such as Kraken, Poloniex, or Bittrex to name just a few.

There are some other mining pools. One of them is 2Miners.com . 2Miners is a mining pool for ZEC mining as well as for all Ethash and Equihash coins. For all of them, SOLO mining option is available. Other features include monitoring bots (free of charge) for any amount of rigs as well as block notification bots. 2Miners have implemented the unique Nicehash ports for rented hashpower fully compatible with Nicehash stratum. Their servers, with DDOS protection, are located in EU, US and ASIA servers are planned soon.

Plug in your card at the top and click on the model number (the red square below), and the hashing and profitability info will be displayed below (click Equihash to make it blue so it will calculate).

In this post I’ll break down the various steps required to mine the eagerly anticipated Zcash which is due to be released on the 28/10/16. In advance of the launch day we can prepare our machines to be right from the very start.

Running four Gigabyte Aorus Waterforce Extreme in a normal Case. Runs smooth, almost quiet, a lot of overclocking potential cause of the Watercooling. Getting 3000H/s with slight oc. Good GPU. Highly recommended.

If you are mining at home or by yourself, you should join an existing mining pool. You can choose mining pool to get it started with this process.  You need a mining pool to direct your hashing power. You should compare reviews and features of multiple zcash pools in order to get right decision.  You should choose the nice hash pool to get profitable mining experience.

“ico +ethereum share price”

In my videos, I teach you how to mine Ethereum, Bitcoin, Litecoin, Dash, ZCash and many more coins. I have many how-tos on mining altcoins like Ethereum, along with guides on setting up wallets for altcoins. I also discuss many cloud mining sites such as Hashflare and Genesis Mining. With Hashflare and Genesis Mining cloud mining services you can start mining Ethereum, Bitcoin and other coins without any equipment of your own. Check out my video playlists and other videos for more information.

The world of cryptocurrencies is growing at an accelerated pace. The crypto market cap continues to grow with record breaking volumes. The basis for creating value in the crypto world is the mining process for major and veteran coins – with Bitcoin leading them.

Replace “eu” for your mining pool address found on the pool “Get Started” page, “ZEC-ADDRESS” for your zcash wallet address (transparent address) and lastly replace “-t 8” for the number of threads you want to use. (If you’re using the Nicehash pool, you can use -l to specify your location like “eu” for Europe)

Zcash offers total payment confidentiality, while still maintaining a decentralized network using a public blockchain. Unlike Bitcoin, Zcash’s private transactions hide the sender, recipient, and value of transactions on the blockchain. Only those with the correct view key can see the contents. Users have complete control and can opt-in to provide others with their view key at their discretion.

I’ve done a search here and no one is talking about Bminer a new Equihash miner released last month. from gpumining I started with EBWF then I discovered DSTM which was the tits with the higher hashrate but it was fairly unstable if I tried to adjust the vid cards through MSI AB giving me hard freezes or bsods. Sometimes they happened a short while after I walked away after adjusting a setting to give it time to settle. Sometimes hours later. I saw this post: https://bitcointalk.org/index.php?topic=2519271.320 and tried it out. Using the exact same stable msi AB settings I… Read more »

–user   (this will be your wallet address followed by a dot (or period) and an optional name for your rig. In this case I am simply calling it the model of my video card or GTX1080).

I’ve a question, I have a 700W Power supply(non modular) , and currently a gtx 1080 and one gtx 1060 3GB. So the miner shows that I’m using about 200W for this gtx, if I connect one more gtx 1060 3GB and I start the miner, it shows errors like it hasn’t enought power, and the last gpu stops running but the fan go 100%.

Quadro P6000, Quadro P5000, Quadro M6000 24GB, Quadro M6000, Quadro M5000, Quadro M4000, Quadro K6000, Quadro K5200, Quadro K5000, Quadro K4000, Quadro K4200, Quadro K2200, Quadro K2000, Quadro K2000D, Quadro K1200, Quadro K620, Quadro K600, Quadro K420, Quadro 6000, Quadro 5000, Quadro 4000, Quadro 2000, Quadro 2000D, Quadro 600, Quadro 410

Running four Gigabyte Aorus Waterforce Extreme in a normal Case. Runs smooth, almost quiet, a lot of overclocking potential cause of the Watercooling. Getting 3000H/s with slight oc. Good GPU. Highly recommended.

ASUS GTX 980 Ti STRIX OC 6GB 495 1468 3305 382.53 275 +109 Core clock, +100 Memclock, +50mV min +37mV max, fan auto, 110% powertarget, 91°C Target. Maxes at 79°C while mining EWBF 0.3.4b Win 10 x64 Kappawaii new / used as of June 2017

Configure the mining software (usually via batch file) to point to your desired pool and mine to your wallet address, as well as any GPU specific options you may need (or want) to enable (if supported).

The EWBF CUDA Zcash Miner has a built-in developer fee that is set at 2%, meaning that every 10 minutes the software will switch to a different pool and mine for the developer some shares and then get back to mining for you. The author of the software claims speeds of about 250 H/s for Nvidia GTX 1070 while the NiceHash EQM miner does currently about 220 H/s on the same GPU. Our quick tests showed a hashrate of about 235-240 H/s average (up to 250 H/s) on stock GTX 1070, so still slightly faster, but not as much as you may want it to… then there is the dev fee as well and it seems that we are seeing somewhat more rejects than, especially when switching to mine for the dev fee. So while this may be an interesting alternative for users willing to mine outside of NiceHash, the actual performance that you may get poolside may not be much different than with what is currently the fastest implementation from NiceHash (taking into account the dev fee and the rejected shares)…

Building a large ZEC position through mining now may allow you to take advantage of price appreciation in the future with less risk than you’d face by just buying ZEC. Let’s break this idea down a bit further.

The official Zcash 1.0 User guide at https://github.com/zcash/zcash/wiki/1.0-User-Guide is a great place to start and just get familiar with how Zcash works. The Zcash software provided by Zcash company is a complete package that will let you run a Node, Mine with your CPU, and also has a built in Wallet for sending and receiving Zcash.

The first question everyone asks once they have decided to try Zcash mining is “What hardware is best to mine with?” This question is not easily answered because there are many improvements in hardware and software happening on almost a weekly basis. To start, mining falls into one of two general categories

“altcoin mining ico wiki”

Hey Charlie, Well, you should multiply the hashrate and electricity consumption and price tag of each GPU by 6, seeing as the Zodiac contains 6 GPUs. When you identify which exact card the Zodiac is using, you’ll be able to search those details but you’ll still need to account for there being 6 GPUs in the complete unit, so 6 times as much hashrate, cost and power consumption. That’s how you’ll know how soon the unit will pay for itself (at least with the current price and difficulty parameters). $180k per year sounds way too good… Note that I’m assuming… Read more »

First, head over to whattomine.com, which provides up-to-date figures for current prices, block times, and network hashrates (as measured in megahashes per second, or MH/s, denoting millions of calculations per second).

Here you can see the miner.exe which is the main program, a couple of support dll’s (Dynamic Link Libraries), a help.txt file with some basic command overviews, as well as several .bat (Windows batch) files with example configurations for several mining pools that support Zcash.

If you are new in crypto like me and don’t know where to start or what to do, check this article, it helped me find the good exchanges, save a lot in commission fees and showed me how to earn free coins (not many but a little of different coins, who knows, maybe one day they will be worth a lot) :

ccminer lyra2re download MtGox gone hodlminer source LTC halving 5-chip Dual Miner litecoin gpu miner GAW Qubit ASIC Compute 2.1 whirlpool miner download Halley GHS G-Blade voltage mod ccMiner 1.4.7.SP AMD GPU miner cgminer gridseed windows Brave BTC wallet BTC38 LDC info Mining Edition video cards USDE mining coin control qt wallet Steem windows miner Antminer X3 ASIC Bitcon ASIC efficiency sweet spot Ethereum prfoitability BET info Poloniex increase power limit cryptomaps Hashie problem DragonMint B29 ZEC mining claculator ccMiner LuxCoin panic sale GENE info X14 rent gpu mining frame NOC info ASUS Mining RX 470 Bitstamp Gold Bitcoin ASIC power usage Bitcoin Gold exchange FSP crypto mining Ronpaulcoin pools NYDFS BitLicense XMOS ETH Polaris 20 X14 hashrate SummerCoin V2 Steem mining guide Neocoin pools Blakecoin Nvidia bfgminer 4.0.0 Gridseed Bitmain BM1360 X11-Gost NiceHash Quark info Vega mining Dirac Blake-256 MEOW trading cgminer 3.7.8 neoscrypt windows ccminer hashrate test Bitcoin Index X11 ASIC miners Ethereum solo mining proxy XCN miner

(ZEC) This is what happed to me. I lost one “Pending” payment, and that “Pending” last for at least 6hrs. When I woke up in the morning, that Pending was gone, no payment. I checked all the top miners, they have the same thing, I don’t know if they notice or not. Many times, the number for “Balance” freeze for couple hrs. I’m pretty confidence to say that, nanopool does steal coins. However, I tried flypool (steal hashes), and Dwarfpool, and turns out this pool is ok to mine.

You can also start mining process with your GPU. You can use claymore as it has a long standing reputation and optimized for miners. It helps improve the hashing rate and sometimes it takes time download and use. If you are going to use Genoil miner then it is going to work for pool mining and with AMD graphic cards.  The miner may charge 2.5% fee and the every hour miner mines for developer during 3 minutes.

Mixing reinvented for your privacy ChipMixer.com ChipMixerwzxtzbw.onion Advertised sites are not endorsed by the Bitcoin Forum. They may be unsafe, untrustworthy, or illegal in your jurisdiction. Advertise here.

I have a Trojan.GenericKD.5331716 in any download for the nheqminer for windows. Does not matter what source I go to. Best be aware. If someone has a source that does not contain it, would be happy to receive.

Configure the mining software (usually via batch file) to point to your desired pool and to your wallet address, as well as any GPU specific options you may need (or want) to enable (if supported).

Below is an example of a batch file that we use on one of our Windows-based mining rigs. Everything is contained in a single line in the .bat file. That single line specifies the program to be run (miner) and a few settings that customize the miner’s activity. Finally, and most importantly, one of Zcash wallet addresses is specified so mined Zcash goes to the right place. Here’s the .bat file that we are currently using to start mining. Scroll to see all of it’s contents if necessary.

Ethereum mining Heavycoin mining MtGox situation Bitcoin exchange rate cudaminer 2014-02-28 dstm Bcash FutureBit MoonLander USB miner Gridseed seller list uk1.ghash.io Protoshare profitability Bitcoin Gold GPU mining AntMiner U1 thermal images crypto currency community Spondoolies-Tech promotion Pxlcoin info Neoscoin pool Monocle info ASICMiner Block Erupter Cube ZeusMiner GEN III Antminer S9 BCC Meltdown AC info sharkcoin GenesisCoin pool video BIOS flash Excavator 1.2.2a consensus issue Draper University ccMiner 2.2-mod-r1 sgminer 5.1.0 Nvidia GP100 BSTY ccminer marlin siacoin miner hidden crypto miner Bitz Coin pool HAM mining copper mining rig Ethere mining rigs AntMiner S1 temperatures LeaseRig test ether-proxy Ethereum selling yescrypt miner ZeusMiner Blizzard X6 test RX 470 ethash hashrate Bata exchange Capricoin Ethminer CUDA windows cpu miner scrypt GunCoin exchange GDC mining QuickBooks Bitcoin crypto signals XSV Nybble sfards contest Bminer Nvidia miner GeForce GTX 950 Doubloons scrypt crypto BAY trading NMC pool BCN exchanges DigitalNote mining crypto extortion BChinese Yuan

While not mandatory, it is recommend to install a GPU overclocking utility such as MSI Afterburner to be able to optimize your GPU settings to mine the most efficiently. The installation of MSI Afterburner is straight-forward and should not require a reboot. For the EWBF miner there is nothing to install as we will be simply extracting the programs folder and running the program’s exe. We will however need to modify one of the example batch files included with the miner in order to get started.

Simply plug in Freedom Miner to any 110-240V power outlet, plug in the Ethernet connection to your router or cable modem, turn it on and it will begin mining right away. A typical 15A circuit can support two Freedom Miners (7.25A / Unit), assuming no other equipment is being powered at the same time.

You need to take in to consideration the system which requires another 100w. 1080 with 80 percent power and 2 1060 also at 80 percent power should be fine. If it doesn’t work try to reduce power further to 75 percent. I have my 1080s set to 70 percent power.

It also ensures that information of transaction is verified by the miners.  It means that this digital currency provides selective transparency and privacy of transaction.  The payment of Zcash may be published publicly on public block chain but the transaction amount, recipient, sender may remain private.

“real estate investing |forex investing”

Using this miner is easy but you have to specify the number of cores you have for better performance.  You should check your CPU count by opening task manager.  The nicehash miner has 2 versions and comes with it. One version is to get paid in BT C and another in Zcash. Now open the nheqminer_zcash” file now you can start mining with CPU and paste the command given below:

Equihash est un algorithme de hash spécifique qui a été créé par les créateurs de Zcash. Une de ses particularités est que cet algorithme demande une très grosse quantité de mémoire vive (RAM) et une grosse bande passante à cette mémoire pour que le mining soit profitable. Ainsi la production d’ASIC est à ce jour impossible et seules les cartes graphiques peuvent réellement le miner. (Il est également possible de miner equihash avec son CPU mais cela n’est vraiment pas rentable et il y a plus de perte en énergie que de gains.)

I’ve had success both ways, so if you run into an issue with one method, delete the drivers and try the other method. If you need to remove your drivers, use the DDU (Display Driver Uninstaller) program from Guru3d.com to remove everything cleanly, then start over.

Hi.. friends, How are you? i am jeny From London, am here to provide you free guide about Cryptocurrency. just visit my website cryptolegit.com & get expert beginner to advanced Guide About Cryptocurrency. Please feel free put your question, so we both make this platform more useful. if you wanna write guest post on cryptolegit.com with one Do follow attribute then also mail me your article. your article should be 100% unique, natural, no rewrite/spin & related to Cryptocurrency with minimum 500 Words. Thanks

[WARN] [2017-12-04T23:58:54+03:00] Get error: A request to send or receive data was disallowed because the socket is not connected and (when sending on a datagram socket using a sendto call) no address was supplied., resetting in 5 seconds

We’ve been using Nanopool for our ETH mining rigs for over 4 months, and it works just fine. Dashboard is very clear and makes it easy for newbies like us to setup. Payments are released once or twice a day when every time we reach our ETH threshold. So far, no caomplaints whatsoever. Plus, they send you email notifications every time a rig stops mining for any reason.

Zcash, or ZEC, is a currency that developed from Bitcoin, with the addition of anonymity. While in Bitcoin’s blockchain, anyone can see the transactions between all the addresses and see each address’s balance, with Zcash it is possible to make transactions without revealing the balance of a wallet (which represents an address).

From a security minded engineer: How can I trust someone sharing Windows executable via Google Drive and using WinRar? The guide is nice but it raises lots of security concerns. There’s no auditable open source code and stamp by security experts. Not long ago we had WannaCry spreading in the wild.

By default the EWBF miner should extract to a folder named “Zec miner 0.3.3b” unless you changed it. I would recommend placing this folder somewhere easy to get to, such as the root of your C drive, your Desktop, or somewhere you can easily locate it. For this guide I extracted it to: “C:\Zec miner 0.3.3b“. Open up the Zec miner 0.3.3b folder and you should see files similar those those below:

[WARN] [2017-12-04T23:58:59+03:00] Get error: A request to send or receive data was disallowed because the socket is not connected and (when sending on a datagram socket using a sendto call) no address supplied., resetting in 5 seconds

If all is looking good at this point, congratulations, you have successfully setup the EWBF miner and pointed it to a pool and are earning Zcash. After some time you can go to the Payouts tab to get a rough estimate of your expected income, but the numbers don’t really mean much until at least 24 hours of constant mining have gone by.

Incentivizing the creation of open source miners will enable a wider community to mine for Zcash coins and take ownership of the network as a public good. While we expect a full range in size of Zcash miners to exist, the more individuals who run a miner (whether GPU or CPU) the stronger the network.

“zcash mining windows _ethereum symbol”

GeForce GTX 590, GeForce GTX 580, GeForce GTX 570, GeForce GTX 560 Ti, GeForce GTX 560 SE, GeForce GTX 560, GeForce GTX 555, GeForce GTX 550 Ti, GeForce GT 545, GeForce GT 530, GeForce GT 520, GeForce 510

You can also use a hardware wallet such as Trezor, Ledger Nano S, or Jaxx, a popular supported web wallet. You can even mine directly to exchanges that have support, which is primarily what I’ve been doing since November 2016 (I’ve been mining to Bittrex).

Building a large ZEC position through mining now may allow you to take advantage of price appreciation in the future with less risk than you’d face by just buying ZEC. Let’s break this idea down a bit further.

[WARN] [2017-12-04T23:58:49+03:00] Get error: A request to send or receive data was disallowed because the socket is not connected and (when sending on a datagram socket using a sendto call) no address was supplied., resetting in 5 seconds

If you are a beginner you should know how to install and use this software. This software takes benefit of your CPU to mine. You can also build a dedicated GPU rig for mining the basic software but this is not sufficient. You should decide on software that optimizes to take profit of your GPU.

Just in time for Christmas a new NiceHash EQM 1.0.4a miner is available with about 10-15% speed boost for owners of Nvidia GPUs mining Zcash (ZEC). Like previous versions of the EQM miner it will only work for selling your hashrate on NiceHash, so not able to mine on another pool with it. The latest speed bump is intended for SM52 and SM61 capable Nvidia GPUs (that means only 9xx and 10xx cards), so no speedups for owners for first gen Maxwell GTX 750 (Ti) unfortunately. Currently only a Windows version is available. We are seeing a nice bump from about 320 H/s with the previous version to a little over 360 H/s on a stock GTX 1070 GPU with the 1.0.4a, overclocking brings even more hashrate.

Replace “eu” for your location, “ZEC-ADDRESS” for your zcash wallet address (transparent address), replace “-t 8” for the number of threads you want to use, and lastly replace “-og 0” for the number of GPUs you’re using (as in -og 0 1 2 if you’re using 3 GPUs)

It does mine but there is no way to get paid and you need to put your wallet address in some other website,the app crashes and suddenly stops constantly, it needs an update to fix all those software errors,is really bad design it should pay immediately after is done hashing and it should have a place to put your wallet so it sends the coins to the wallet directly and have no issues, very hard to get support, it seems to be working and hashing but just can’t get it to pay or no support, i don’t recommend it seems like a gimmicky lie

For this reason, miners started to work in groups, which are called pools. A pool of miners unites the calculation power of a workforce of small miners in order to obtain a significant mining power (aka hash rate), thus increasing the chance of solving a puzzle and getting the reward for it. Each miner in the pool, gets a “share” of the reward, according to the amount of power he contributed to the pool.

Please keep this in mind before you assume that this is profitable and buy hardware. If you were mining in December 2016 assuming a $90-100 price, by January 2017 to early March 2017 your Zcash stash was worth 1/2 to 1/3rd.

Now me personally I am a little superstittious when it comes to running things and I for some reason like to run my mining programs a super user. This will be a little redundant, but this is just how I do it.

In order to mine using this guide, there are two things that you’ll need. The first is a wallet to store your funds. There are currently multiple GUI wallets available and you can compare them here. You can also use this guide to learn how to install one of them on Linux. It is also possible to use an exchange as a wallet but we do not recommend it.

You can also start mining process with your GPU. You can use claymore as it has a long standing reputation and optimized for miners. It helps improve the hashing rate and sometimes it takes time download and use. If you are going to use Genoil miner then it is going to work for pool mining and with AMD graphic cards.  The miner may charge 2.5% fee and the every hour miner mines for developer during 3 minutes.

The AM200 Ethereum Miner has been in development for a number of months with the goal of delivering a high quality solution suitable for almost any environment. Proper cooling, and web based management of the miner provide for ease of use not seen with many Ethereum Miners to date,

For this test, we are using the EWBF 0.3.3b miner. We are comparing all of the GTX series GPUs in terms of mining performance as well as power consumption. For the NVIDIA GTX 1070, GTX 1080 and GTX 1080 Ti we have both Founder’s Edition and overclocked variants. We did not test the GTX 1050 (2GB) and GTX 1060 (3GB) variants because they have significantly lower value for gaming and machine learning. We are assuming these GPUs are not dedicated miners and instead Zcash mining is something to utilize hardware while it is idle/ offset costs.

I think the Nvidia bottle neck applies to anything you mine on Windows. It has to do with the recent Nvidia drivers. That’s why I suggest ubuntu. Now I’m not for sure on Windows 7 because I only use Windows 10 and Ubuntu. If you find something out let me know!

2. All sales are final. No refunds will be granted. Defective miners can be repaired for free if they fall under the Asic Miner Market  warranty policy. After the warranty period, machines can be repaired at the cost of parts and labor.

Advantages: It does seem to be a bit less stressful on hardware — power usage is a bit lower. You can watch YouTube HD videos without chopping while Bminer works, and it will dial down hash rate to accommodate this. DSTM and EBWF usually make watching videos or working on spreadsheets uncomfortable to impossible.

Theres a few more things we need to do before we can start running the miner. First of all, we need to add this string of code to the config.txt, especially on 1-2GB video cards. This will ensure everything runs smoothly. Add this code to your config.txt file:

You will also need a Zcash wallet address either from a Zcash wallet you installed and run on your own PC, or a Zcash “Deposit” address from an exchange. I would recommend learning how to install run your own wallet unless you are only going to mine with a few cards and plan to exchange the coins right away. Several of the large exchanges support Zcash so you can obtain a wallet address from one such as Kraken, Poloniex, or Bittrex to name just a few.

Configure the mining software (usually via batch file) to point to your desired pool and mine to your wallet address, as well as any GPU specific options you may need (or want) to enable (if supported).

hi, bminer also faster than other miner around 10-15%, but reject data it’s so high, i using on nicehash to mine, reject data around 3% to 5%, i will try direct to mining zecoin later and report of bminer.

Following the startup information. we can see we are getting block information from the pool and that our graphics card(s) are detected and being assigned new work. After a little bit you shoudl start seeing shares accepted messages indicating your GPU has found a solution, submitted it the the pool and it was accepted.

For now though, just keep the miner running for 30-60 minutes at default settings just to make sure everything is working properly. This will also allow time for your card to find a few shares and for the pool to accept them and tabulate them on your wallet display page. There can be sometimes a 10-15 minute delay from when your shares are first accepted and any statistics to appear on the pool side, so now would be a good time to go grab a cup of coffee.

I really like using EthOS over simple mining cause you can actually somewhat use LXDE as an operating system. The problem with EthOS is the limited number of mining programs you can run and the limited amount of packages you can install (instead of apt-get you have to use apt-get-ubuntu and about 90% of packages won’t download or install, and if they do you might have broken EthOS.)

The issue is that ewbf is not the fastest miner availible so it should be compared to dtsm´s miner and the increases are not that significant. But the 1080 boost seems nice, i will test it on my rigs.

Find the place you installed Cuda and navigate to it. To do this it is easiest to download it and drag it into your home folder. To do this press the file cabinet at the top left of the screen. It should open up to the desired folder. You should see icons like Desktop, Documents, Downloads, etc. Now just drag your Cuda download here.

The average mining rate of the system is 200Mh/s, providing an opportunity for an excellent return at current ETH values, if ETH continues to climb as Bitcoin has it will produce a return many times over.

Unfortunately it’s currently written specifically for linux and uses direct OperatingSystem calls to be as fast as possible, to have very low cpu usage and to consume energy as little as possible. However if people are interested in a Windows version I’ll port it. First we have to check how it performs on something faster then a However my test are very promising.

Not Tech Savvy? No problem – we’ve got live support on our 800 number available Monday-Friday 9am to 5pm to help keep you mining. Got a problem that we’re not able to coach you through over the phone? We’ve got you covered – Freedom Miner has a remote desktop application built in and with a couple of clicks you can authorize one of our engineers to access your rig and make the repair remotely.

Finally at the bottom we have the per worker statistics. If you have only one worker all these fields will show the same statistics, but this area breaks out the data for individual workers, where everything above was an aggregate of all your workers.