Disclosure: Mining equipment metrics are calculated based on a network hash rate of 437,207 KH/s and using a ZEC – USD exchange rate of 1 ZEC = $ 243.51. These figures vary based on the total network hash rate and on the ZEC to USD conversion rate. Equipment cost can vary, block reward is fixed at 10 ZEC and future block reward reductions are not taken into account. The electricity price used in generating these metrics is $ 0.12 per kWh. Network hash rate varies over time, this is just an estimation based on current values.
Tout d’abord il vous faut télécharger un logiciel de minage. Sur Nvidia, le mineur le mieux optimisé et qui vous donnera le meilleur hashrate est EWBF miner. En général, chaque pool vous donne une version spécifique de EWBF avec toutes les configurations liées au pool déjà effectuées.
In my videos, I teach you how to mine Ethereum, Bitcoin, Litecoin, Dash, ZCash and many more coins. I have many how-tos on mining altcoins like Ethereum, along with guides on setting up wallets for altcoins. I also discuss many cloud mining sites such as Hashflare and Genesis Mining. With Hashflare and Genesis Mining cloud mining services you can start mining Ethereum, Bitcoin and other coins without any equipment of your own. Check out my video playlists and other videos for more information.
Running four Gigabyte Aorus Waterforce Extreme in a normal Case. Runs smooth, almost quiet, a lot of overclocking potential cause of the Watercooling. Getting 3000H/s with slight oc. Good GPU. Highly recommended.
Just in time for Christmas a new NiceHash EQM 1.0.4a miner is available with about 10-15% speed boost for owners of Nvidia GPUs mining Zcash (ZEC). Like previous versions of the EQM miner it will only work for selling your hashrate on NiceHash, so not able to mine on another pool with it. The latest speed bump is intended for SM52 and SM61 capable Nvidia GPUs (that means only 9xx and 10xx cards), so no speedups for owners for first gen Maxwell GTX 750 (Ti) unfortunately. Currently only a Windows version is available. We are seeing a nice bump from about 320 H/s with the previous version to a little over 360 H/s on a stock GTX 1070 GPU with the 1.0.4a, overclocking brings even more hashrate.
Next, you’ll want to modify your system page file and manually set it to 16384 MB (16GB). Right click “This PC” from Windows Explorer and choose “Properties”. Click on “Advanced system settings”. On the Advanced tab, click “Settings” (under Performance).
so it’s latency dependent. I’m not sure how much time u have. If u have some, I would compile some versions that should show where the bottleneck is. Also could u pls check the cpu usage. If u have some time for all this stuff ofc.
Claymore has updated his ZCash AMD GPU miner to version 12.5 adding support for the ZCash forks (altcoins using the same Equihash algorithm) as well as doing some more improvements to the miner. The latest version comes with improved fans management for latest drivers and Polaris cards, added shares-per-GPU statistics when “s” key is pressed, addend an option to use a password for remote monitoring as well as included EthMan v3.0 which supports passwords and email notifications. This is currently the preferred solution by most miners mining ZEC or other coins based on the Equihash algorithm for AMD OpenCL GPU mining rigs, the miner does not yet have support for Nvidia GPUs. Nvidia miners can go for some of the available options for CUDA mining such as the nheqminer, excavator or EWBF’s CUDA Zcash miner for mining coins using the Equihash algorithm on their hardware.
There are some other mining pools. One of them is 2Miners.com . 2Miners is a mining pool for ZEC mining as well as for all Ethash and Equihash coins. For all of them, SOLO mining option is available. Other features include monitoring bots (free of charge) for any amount of rigs as well as block notification bots. 2Miners have implemented the unique Nicehash ports for rented hashpower fully compatible with Nicehash stratum. Their servers, with DDOS protection, are located in EU, US and ASIA servers are planned soon.
Now with all that said, it also does not mean that a mining program cannot contain a virus, or that it isn’t a virus itself, so don’t just blindly trust it either. It is just that there is a valid reason for a high rate of false positives when it comes to such software. Just as a general rule, I would not load any mining software on a machine that contains a cryptocurrency wallet, or one that you do any type of financial work on. It is best to play it safe and keep your mining rigs separate from your important information, so a separate machine is best that is dedicated to mining if possible.
The other software I will be using in this guide and recommend is MSI’s Afterburner, which the latest version can be found on the MSI site here. The version of Afterburner I used for the guide is 184.108.40.20667.
2. All sales are final. No refunds will be granted. Defective miners can be repaired for free if they fall under the Asic Miner Market warranty policy. After the warranty period, machines can be repaired at the cost of parts and labor.
Run with ‘-h’ parameter to learn possible commands. By default, miner uses all CPU cores and no CUDA devices. You need to explicitly enable CUDA devices (setting ‘-cd’ parameter). If you wish to mine only with CUDA and no CPU, set ‘-t 0’.
Block A block is a unit of the code the comprises the bockchain. It is the record of transactions that have occurred since the last block was created and a confirmation to previous transactions. Each block links to the block before it, thus creating a full chain back to the original or “genesis” block.
After letting your newly setup miner run for about 20-30 minutes, you can check the pool to confirm you shares are being counted and see some pool-side statistic of your mining progress. On the top right of the Flypool Zcash homepage (shown above) you can enter your Zcash wallet address and click on Check Status to get to your own wallet personal statistics page.
Recommendations and Information found on Cryptopotato are those of writers quoted. It does not represent the opinions of Cryptopotato on whether to buy, sell or hold any investments. Investors should be cautious about any recommendations given. All investors are advised to conduct their own independent research into individual coins before making a purchase decision. Use information at your own risk.
Hi.. friends, How are you? i am jeny From London, am here to provide you free guide about Cryptocurrency. just visit my website cryptolegit.com & get expert beginner to advanced Guide About Cryptocurrency. Please feel free put your question, so we both make this platform more useful. if you wanna write guest post on cryptolegit.com with one Do follow attribute then also mail me your article. your article should be 100% unique, natural, no rewrite/spin & related to Cryptocurrency with minimum 500 Words. Thanks
(ZEC) This is what happed to me. I lost one “Pending” payment, and that “Pending” last for at least 6hrs. When I woke up in the morning, that Pending was gone, no payment. I checked all the top miners, they have the same thing, I don’t know if they notice or not. Many times, the number for “Balance” freeze for couple hrs. I’m pretty confidence to say that, nanopool does steal coins. However, I tried flypool (steal hashes), and Dwarfpool, and turns out this pool is ok to mine.
If you are mining where power is expensive (e.g. Northern California), then that will significantly hit profits. What this does not take into account is that if you are doing this in a home or office where you also need to pay peak pricing and air conditioning costs, the profitability can be much lower. On the other hand, if you are in a data center then you can easily plan for power and cooling costs.
You will also need a Zcash wallet address either from a Zcash wallet you installed and run on your own PC, or a Zcash “Deposit” address from an exchange. I would recommend learning how to install run your own wallet unless you are only going to mine with a few cards and plan to exchange the coins right away. Several of the large exchanges support Zcash so you can obtain a wallet address from one such as Kraken, Poloniex, or Bittrex to name just a few.
Click on the Advanced tab and click “Change” under Virtual Memory. Uncheck “Automatically manage paging file”. Click the radio button for Custom Size and enter 16384 for the Initial size and Maximum size. Then click OK, Apply, OK.
I have a Trojan.GenericKD.5331716 in any download for the nheqminer for windows. Does not matter what source I go to. Best be aware. If someone has a source that does not contain it, would be happy to receive.
Here is a quick list of the latest CPU and GPU miners available for mining the Zcash (ZEC) that uses Equihash algorithm used by the coin. Since most pools and miners are based on Stratum mining support you should be able to use them on almost all mining pools with support for ZEC. What you should be looking for is what works best on your hardware in terms of stability and what provides you with the optimal hashrate in order for you to maximize your profit. CPU mining is still viable as GPU miners are yet to be further optimized to be able to provide significantly higher hashrates, though you should know that the days of the CPU mining of ZEC are probably numbered.
Zcash, a privacy centered cryptocurrency, made a mark in the mining scene by use of its ‘Equihash’ Proof of Work mining algorithm. The algorithm distinguishes itself from others with its focus on memory. In short, to mine Zcash, you’ll likely need more memory than what you’d need for other cryptocurrencies. But don’t worry, Zcash’s whopping $350+ USD trading value gives you enough incentive to get started.
As we have done for Monero CPU and GPU mining, we have an easy-to-use Zcash NVIDIA GPU mining instance using the popular EWBF v0.3.3b miner. One command and you can start/ stop miners targeting single GPUs and be mining in a matter of seconds.